• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.543-552
• /
• 2006

The current design for crack width control in concrete bridges is incomplete in analytical models. As one of the important serviceability limit states, the crack width be considered with the quantitative prediction of the initiation and propagation of corrosion and corrosion-induced cracking. A serviceability limit state of cracking can be affected by the combined effects of bond, slip, cracking, and corrosion of the reinforcing elements. Considering life span of concrete bridges, an improved prediction of crack width affected by time-dependent general corrosion has been proposed for the crack control design. The developed corrosion models and crack width prediction equation can be used for the design and the maintenance of prestressed and non-prestressed reinforcements by varying time, w/c, cover depth, and geometries of the sections. It can also be used as the rational criteria for the maintenance of existing concrete bridges and the prediction of remaining life of concrete structures.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.253-261
• /
• 2015

Deterioration of reinforced concrete structures in corrosive environment is tend to be accelerated due to ingress of aggressive ion such as chloride ion. Chloride-induced corrosion is affected by various factors such as cover concrete qualities, width of existing cracks, and cover depth of concrete. However, the allowable crack width of RC structure in design code does not consider the concrete material properties and conditions of construction except the cover depth. In this paper, an equation for allowable crack width is proposed to consider the cover concrete quality, crack width, and cover depth. Crack width, cover depth, and water-cement ratio of concrete are selected as influencing factors on corrosion of reinforcement for rapid chloride tests. From test results, the relationships between the factors and corrosion are derived. Finally, the equation for allowable crack width is derived in terms of concrete compressive strength and cover depth. The presented equation is verified by comparative calculations with design code variables.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.97-105
• /
• 2009

Development and use of blended cement concrete is gaining more importance in the construction industry with reference to durability mainly due to the pore refinement and reduction in permeability. Cracks play a major role on important parameters like permeability, rate of chloride ingress, compressive strength and thus affect the reinforcement corrosion protection. Furthermore, when a crack occurs in the cover concrete, the corrosion of the steel reinforcement may be accelerated because the deterioration causing factors can pass through the crack. In recent years the effect of cracking on the penetration of concrete has been the subject of numerous investigations. Therefore assessing the service life using blended concrete becomes obviously in considering the durability. In the present study, the corrosion assessment of composite concrete beams with and without crack with of 0.3mm using OPC, 30% PFA, 60% GGBS, 10% SF was performed using half cell potential measurement, galvanic potential measurement, mass loss of steel over a period of 60days under marine environmental conditions and the results were discussed in detail.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.201-206
• /
• 1997

본 연구에서는 Ni-기 합금인 합금 600과 합금 690, Fe-기 합금인 합금 800 및 초내식성 오스테나이트계 스테인리스강인 SR-50A에 대하여 부식 환경의 변화에 따른 특성 평가를 행하였다. 전기화학적 부식 평가는 양극 분극 시험을 통하여 행하였으며 부식 환경은 NaCl, HCI, NaOH(+$Na_2$SO$_4$) 액이었다. 응력 부식 균열 시험으로는 CERT(Constant Extension Rate Test)를 행하였으며 부식환경은 40%NaOH, 40%OH+12%$Na_2$SO$_4$ 용액이었다. CERT시험 후 그 파면을 SEM관찰하여 파괴 양상을 관찰하였다. 각 합금의 양극 분극 특성을 부식 환경에 따라 평가한 결과, 부식 용액의 증류에 따라 서로 다른 분극 거동을 보이고 있는데 산성과 중성 용액에서는 SR-50A가 가장 큰 저항성을 보이는 반면, 강 알카리용액인 NaOH용액에서는 Ni-기 합금의 저항성이 Fe-기 합금의 저항성보다 우수하게 나타났다. 응력 부식 균열 저항성은 전반적으로 Fe-기 합금보다 Ni-기 합금이 우수하게 나타났다. 파단면을 SEM관찰한 결과 합금 800과 SR-50A(tube)는 용액에 관계없이 입내 파괴 모드를 나타내고 있으며, 합금 600과 SR-50A판재는 입계 파괴 양상을 보이고 있다. 또한 가성 용액 중에 $Na_2$SO$_4$를 첨가할 경우, 부식 속도를 가속화시키고 응력 부식 균열 저항성을 감소시키고 있다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.140.2-140.2
• /
• 2005

• Journal of Welding and Joining
• /
• v.4 no.1
• /
• pp.16-31
• /
• 1986

스테인레스강의 주요성능은 내식성이기 때문에 부식성의 환경에서 사용되는 일이 많다. 이 때문 에 스테인레스 강제강치에서는 부식에 관계되는 사고가 대단히 많다. 그림1(a)은 일본화학공학협 회가 1987년부터 1982년사이에 화학장치에 발생한 615건의 손상을 종류별로 분류한 것이다. 전면 부식, 공식, 동력부식균열등의 습성환경에서의 전기화학적 부식이 전체의 54%나 점하고 있 다. 이들 손상에 재료별로 보면 그림1(b)와 같이 스테인레스강이 차지하는 비율이 총 1/4에 달하 고 있다. 또한, 별도조사결과에 의하면 각종손상이 용접이음부에서 약 50% 발생하고 있어, 용접 이음부가 부식성환경에서 사용되는 경우에는 이를 부식현상과 그 방지대책을 세우지 않으면 안된다. 용접부에서 이들 부식현상이 발생하기 쉬운 것은 다음과 같은 요인으로 생각된다. (1) 용접내부는 모재와는 다른 금속조직을 가진다. (2) 용접잔류응력이 존재한다. (3) 용접결함이나 이음형식에 의한 형상불연속 놋치화하여 응력집중을 가져온다. 또한 이들이 표 면에 개구한 극간부식을 가질때에는 극간부식의 요인이 된다. 본고에서는 이들 부식현상중 가장 중요한 오-스테이나트계스테인레스강 용접부에서의 응력부식균열 현상에 대하여 설명한다.

• Journal of the KSME
• /
• v.30 no.2
• /
• pp.155-162
• /
• 1990

원유나 각종 석유 제품을 취급하는 구조물 또는 설비들의 부식 균열현상은 이미 오래 전부터 보 고되어 왔으며, 이는 주로 석유나 LPG 등에 포함되어 있는 H/SUB 2/S에 의한 황화물 응력부식 (SSCC:sulfide stress corrosion cracking)으로 널리 알려져 있다(1,2). SSCC에 의한 균열 현상은 일반 저강도 철강재에서는 발생하지 않으며 주로 항복강도가 500MPa 이상의 강재에서 많이 나타 난다. 특히, 구조물이나 설비제작 과정에서 반드시 있게되는 용접부는 SSCC에 아주 민감한 부분 으로써, 대부분의 SSCC 균열이 용접 열영향부(HAZ:heat affected zone)에서 나타나고 있다. 이는 용접부의 미세조직이 모재와 달라 국부적으로 높은 경도를 갖는 부분이 있기도 하고, 또한 운전 조건으로는 만족되지 않는 응력부식 조건이 용접 잔류응력에 의해 만족될 수 있기 때문이기도 하다. 본 글에서는 이러한 SSCC에 의한 균열 특성을 SSCC기구 (SSCC mechanism)와 함께 석유화학 설비재료로 많이 사용되는 철강재를 대상으로 고찰해 보고자 한다.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.149-157
• /
• 2014

The steam generator tubes of nuclear power plants have various types of corrosion failures during the plant operation. The stress corrosion cracking which occurs on the outer surface of tube is called the secondary side stress corrosion cracking and mainly occurs in the expansion-transition area of tube. The causes are the concentration of impurities by the sludge pile-up related to the geometry of its region and the residual stress by tube expansion in the process of steam generator manufacturing. Especially the directionality and sizes of residual stresses are differed according to the tube expansion methods and the direction and the frequency of tube cracks depend on their characteristics. In bases on the plant experiences, it is notified that circumferential cracks of tubes expanded with explosive expansion method are dominantly occurred compared to those of tubes done with hydraulic expansion one. Therefore in this study, according to tube expansion methods frequencies and sizes of tube cracks with specific direction are compared by means of accelerated immersion test and also the crack morphology and the specific chemicals from water-chemistry environment are observed through the fracture surface examination.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.143-151
• /
• 2021

Flexural test of reinforced concrete beam with corroded reinforcement were performed to measure the deflection, curvature and cracking moment for various bar diameter and amounts of corrosion. The amounts of corrosion are varied from 0% to 10% by weight and the bar diameters are chosen as 10mm, 13mm, and 19mm. The changes in reinforcement diameter do not affect the flexural behaviors significantly according to this experiment. If the amounts of corrosion is greater than 2%, the deflection and curvature of the beam increased and the cracking moment decreased. It means that the lower amounts of corrosion does not result structural damage in flexural member significantly as in direct tensile test. A modification factor considering an effect of amounts of corrosion is proposed based on the experiment, which can be used to determine the deflection of reinforced concrete beam with corroded reinforcement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2465-2471
• /
• 2012

For the steel structures those are used in harsh sea environments, corrosion fatigue is a challenging issue in connection with design life. In this research, in order to investigate the influence of cathodic overprotection on the corrosion fatigue crack propagation behavior, corrosion fatigue crack propagation test under the condition of -950mV vs SCE was conducted by using of high tensile TMCP steel plate and the relationships between da/dN-${\Delta}K$ were obtained. At this test, when ${\Delta}K$ is low, the crack propagation rates were accelerated compared to those of seawater condition, however, when ${\Delta}K$ is high, the crack propagation rates were lower than those of seawater condition. As the cause for the acceleration and deceleration of corrosion fatigue crack propagation rates under the condition of cathodic overprotection, the role of hydrogen and calcareous deposits are discussed.