• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.246-246
• /
• 1998

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.16-22
• /
• 2016

Coating pipe(PLP) has been generally used in buried site for protecting the corrosion. To prevent the damage by occurring the defect, other construction or execution works, an anti-oxidation environment was forcibly made by using protective potential. Coating and protective potential are applied simultaneously, but corrosion rate or defects are not easy to observe because soil composition has many uncertainty. Also, defect of coating pipe can not be directly observed. A corrosion coupon can easily measure a corrosion rate directly. The corrosion rate was measured with 6 scenarios using corrosion coupon during about 1 year(6 scenarios are based on soil type and protective potential or not in this research. Resultingly, the corrosion coupon has not occurred in the case of protected by potential current, but corrosion has occurred in a non-protected site. The corrosion rate was measured at least in the clay, and the propensity of corrosion rate was similar in other soil(sand and loams). The local corrosion has occurred in the clay because of high water content. On the other hand, general corrosion was occurred in sand and loams. Commonly, sand is not to corrosive soil. Although, corrosion occurred in sand can be estimated by chemical component and valid with chemical analysis report.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2096-2101
• /
• 1999

This paper presents the effect of shape of external corrosion in pipeline on failure prediction by using numerical simulation. The numerical study for the pipeline failure analysis is based on the FEM(Finite Element Method) with an elastic-plastic and large-deformation analysis. The predicted failure stress assessed for the simulated corrosion defects having different corroded shapes along the pipeline axis are compared with those by methods specified in ANSl/ASME B31G code and a modified B31G code.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.68-68
• /
• 2004

기계기술의 지속적인 발달과 신기술의 개발로 인해 산업전반의 기반 기술인 기계 장치산업은 점점 복잡해지고 또한 다양화되면서 장치시설을 건전하고 신뢰성 있게 유지하고 관리하는 문제가 중요하게 대두되고 있다. 이중 가스 및 오일을 운송하는 배관은 대부분 지하에 매설되어 있고, 다양한 환경에 위치하여 있는데, 이러한 배관은 설치한지 오래되면 여러 가지 환경적 영향에 의해 부식과 같은 결함이 발생되고(Fig. 1과 Fig 2 참조) 이러한 결함이 성장하여 임계크기에 도달하여 대형 재난으로 발전하는 사고가 종종 보고 되고 있으며 이로 인한 경제적, 사회적 손실이 지대하기 때문에 매우 중요하게 인식되고 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.6
• /
• pp.637-647
• /
• 2014

In pressurized water reactors, the upper head of the reactor pressure vessel (RPV) contains numerous control rod drive mechanism (CRDM) nozzles. These nozzles are fabricated by welding after being inserted into the RPV head with a room temperature shrink fit. The tensile residual stresses caused by this welding are a major factor in primary water stress corrosion cracking (PWSCC). Over the last 15 years, the incidences of cracking in alloy 600 CRDM nozzles have increased significantly. These cracks are caused by PWSCC and have been shown to be driven by the welding residual stresses and operational stresses in the weld region. Various measures are being sought to overcome these problems. The defects resulting from the welding process are often the cause of PWSCC acceleration. Therefore, any weld defects found in the RPV manufacturing process are immediately repaired by repair welding. Detailed finite-element simulations for the Korea Nuclear Reactor Pressure Vessel were conducted in order to predict the magnitudes of the repair weld residual stresses in the tube materials.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.374-382
• /
• 2009

Steam generator(SG) tube, as a barrier isolating primary to the secondary coolant system of nuclear power plants(NPP), must maintain the structural integrity far the public safety and its efficient power generation capacity. And SG tubes bearing defects must be timely detected and taken repair measures if needed. For the accomplishment of these objectives, SG tubes have been periodically examined by eddy current testing(ECT) on the basis of administrative notices and intensified SG management program(SGMP). Stress corrosion cracking(SCC) on the SG tubes is not easily detected and even missed since it has lower signal amplitude and other disturbing factors against its detection. However once SCC is developed, that can cause detrimental affects to the SG tubes due to its rapid propagation rate. Accordingly SCC is categorized as prime damage mechanism challenging the soundness of the SG tubes. In this study, reproduced EDM notch specimens are examined for the detectability and quantitative characterization of the axial ODSCC by +PT MRPC probe, containing pancake, +PT and shielded pancake coils apart in a single plane around the circumference. The results of this study are assumed to be applicable fur providing key information of engineering evaluation of SCC and improvement of confidence level of ECT on SG tubes.

• Journal of the KSME
• /
• v.25 no.6
• /
• pp.491-496
• /
• 1985

브레이징(brazing) 이란 접합하고저 하는 모재간의 좁은 간격사이에 모재와는 재질이 다르고 용융점이 낮은 금속 또는 그들의 합금을 용융시켜서 복합재료를 만들어내는 일종의 수단이라고 볼 수 있다. 요즈음 전자분야 등의 여러 곳에서 구조용 재료로 쓰여지고 있는 특수재료나 이종 재료의 접합의 필요성이 증가하고 거기에 접합 수단으로 브레이징법이 응용되고 있다. 브레 이징은 모재, 땜납, 용제(flux)등의 3자로 구성이 되는데 브레이징에서 나타나는 현상은 매우 복 잡하다. 특히 브레이징 접하부의 작업환경은 접합결함과 직결되어 부식이라는 문제를 일으키게 된다. 본고에서는 브레이징 방법, 브레이징용 용제의 종류와 성분, 용제의 작용, 브레이징용 땜납의 현상 그리고 작업환경에 의한 브레이징부의 부식 등을 알아보기로 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.324-325
• /
• 2012

다이아몬드 마이크로 블레이드의 절삭 효율을 향상시키고 소결 공정 중 윤활제의 유동성과 젖음성이 다이아몬드 마이크로 블레이드의 물성에 미치는 영향을 연구하기 위해 Cu/Sn 금속 결합재에 표면을 부식시킨 $WS_2$와 부식을 시키지 않은 $WS_2$ 윤활제를 각각 동일한 체적 분율로 첨가하였다. 윤활제의 표면 개질에 따른 마이크로 블레이드 결합재의 내마모성과 굽힘 강도 시험을 행하였고, 실착 절삭 시험을 위한 마이크로 블레이드 시편을 제작하여 수명 및 효율을 평가하였다. Cu/Sn 금속 결합재 파면에서의 $WS_2$ 입자 방향 분석을 통해 표면 개질 과정을 거친 $WS_2$가 압축소결 공정 중 압축 방향에 수직하게 위치하려는 경향이 크게 나타났으며, 이는 소결체의 강도와 경도를 향상시켰다. 마이크로 블레이드의 절삭 효율 및 수명을 평가하기 위한 실착 절삭 시험 결과, 윤활제 표면 부식처리는 처리하지 않은 경우에 비하여 절삭성능은 비슷하게 관찰되었으나 결합재와의 계면 결함을 줄이므로써 블레이드의 수명을 연장시킬 수 있었다.

• Journal of the KSME
• /
• v.54 no.1
• /
• pp.38-42
• /
• 2014

운영 중인 가스배관에는 매우 낮은 빈도이긴 하지만 부식, 기계적 손상, 내압, 토양하중, 차량하중, 지반침하, 열하중, 균열 등이 생길 수 있다. 안정적인 가스공급과 안전한 배관 운영을 위해서는 손상배관에 대한 건전성 평가가 필요하다. 평가 방법은 국내외 규격을 적용하거나 배관 운영회사에서 독자적인 건전성 평가방안을 적용하면 된다. 결함평가 방안은 고압 가스배관뿐만 아니라, 중저압 가스배관, 압력용기, 원자력 배관, 화학플랜트 배관 등에 필요한 사항이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.311-316
• /
• 2010

Defects positioning of underground gas pipelines using MFL(magnetic flux leakage) inspection which is one of non-destructive evaluation techniques is proposed in this paper. MFL signals acquired from MFL PIG(pipeline inspection gauge) have nonlinearity and distortion caused by various external disturbances. SQI(self quotient image), a compensation technique for nonlinearity and distortion of MFL signal, is used to correct positioning of pipeline defects. Through the experiments using artificial defects carved in the KOGAS pipeline simulation facility, it is found that the performance of proposed defect detection is greatly improved compared to that of the conventional DCT(discrete cosine transform) coefficients based detection.