• Journal of Sericultural and Entomological Science
• /
• v.5
• /
• pp.39-42
• /
• 1965

The newly hatched silkworm can not come out with the head ahead, but on the contray, it comes out with the tail ahead when it comes out of the chorion, in case the loose-formed eggs are vibrated artificially, at the end of the incubation. So the newly hatched silkworm can not throw off the chorion alone which covers his head. This kind of eggs occurs about 30% when they are vibrated. In case they were raised, they could not grow well and some of them died. The result was quite bad. In conclusion, it would be better to distribute earlier the loose-formed eggs farmers and the loose-formed eggs must not be vibrated at the end of the incubation.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.536-542
• /
• 1996

Water-based acrylic sizing agent(GSW-7000) was prepared by emulsion copolymerization for sizing polyester yarns. Ammonium salt version of the acrylic sizing agent offered greater abrasion resistance to weaving forces and water resistance for water jet loom. GSW-7000 exhibited proper viscosity for sizing, high penetration ability and excellent adhesion to polyester yarn. It was possible to reduce the size pick-up to 70~80% of ordinary solvent-based sizing agent due to excellent adhesive strength of GSW-7000.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.185-193
• /
• 2010

In the present study, wave deformation and wave-induced current were calculated under the regular wave conditions using the Boussinesq model. The model results of the wave deformation showed good agreements with the preceeding laboratory experiments of others. The wave-induced current of the fully developed sea state was calculated. For field application of model, the preceeding field data by others in the real scale of the water area were compared, the numerical result of wave deformation showed a relatively good agreement with the field data. Although the numerical result of wave-induced current was underestimated over the longshore bar developed area, the Boussinesq model is generally suitable to predict the wave-induced current.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.666-674
• /
• 2007

It is very important to estimate static squeezing pressure distributions for lining material of sterntube after bearing at dry dock stage since the maximum squeezing pressure value can be one of the significant characteristics representing coming navigation performances of the propulsion system. Moderate oil film pressure between lining material and propulsion shaft is also essential for safe ship service. In this paper, Hertz contact theory is explained to derive static squeezing pressure. Reynolds equation simplified from Navier-Stokes equation is centrally differentiated to numerically obtain dynamic oil film pressures. New shaft alignment technology of nonlinear elastic multi-support bearing elements is also used in order to obtain external forces acting on lining material of bearing. For 300K DWT class VLCC with synthetic bush of sterntube after bearing, static squeezing pressures are calculated using derived external forces and Hertz contact theory. Optimum partial slope of the after bush is presented by parametric shaft alignment analyses. Dynamic oil film pressures are comparatively evaluated for partially bored and unbored after bush. Finally it is proved that the partial slope can drastically reduce oil film pressure during engine running.

• Journal of National Security and Military Science
• /
• s.3
• /
• pp.169-196
• /
• 2005

The point of Bush administraion’s foreign policy is to support the promotion and stability of Democracy in Iraq and counter terrorism and spread of WMD with his strong propulsive force caused by his reelection. In such an environment, there are his leadership, his team, himself, Kim Jung Il, and a new understanding of North Korea after September 11 as the effective factors of Bush administration’s policy toward Pyongyang. Bush administration’s foreign policy of North Korea also shows the process of North Korea’s nuclear weapon program and the future scenario of the Korean Peninsula with "the persistence of solving North Korea’s nuclear weapon program such as the method having done in Lybia", "the holding unconditional talks with Pyongyang, and "the continual concerns with human rights in North Korea." The purpose of Bush administration’s foreign policy of North Korea is to make North Korea do not support terrorism rather than remove the nuclear weapon in North Korea. The process of outlining South Korea’s policy toward North Korea must be considered for "national interest" with reasonable analyses not just hopes For this, South Korea must access systematically human rights of North Korea, prepare projects for a daring approach on North Korea, and strengthen South Korea’s defense ability toward North Korea with deep alliance with U.S and systematize the mutual understanding channel between U.S and South Korea. In conclusion, South Korea must try to get specific methods and practices about Bush administration’s foreign policy of North Korea with national wisdom

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.293-296
• /
• 1998

Surface electrical conduction in insulator is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the widely used materials for outdoor insulator - porcelain, EPDM, Silicone rubber - were discussed by measuring properties of average leakage current and scintillation discharge pulses under artificial contamination conditions. The artificial contaminations used were deionized distilled water fog, 0.5wt% NaCl salt fog of light pollution and 2wt% NaCl salt fog of medium pollution. The average leakage current was appeared linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage was most different to that in case of dry and clean condition. In case of salt fog pollution condition, The leakage current was increased above critical voltage. The scintillation discharges were also activated at the level. the leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.128-134
• /
• 2003

Numerical study on interactions of waves and currents has considerable practical interests in coastal and ocean engineering. And wave-current interactions strongly influence wave characteristics, current profiles, and forces on offshore structures. Presence of currents affects wave properties such as wave height and wave profiles. Furthermore, in case of the irregular waves, it is more complicated problem. The propose of present study, using the one-dimensional wave-current numerical model is based on the extended Boussinesq equation(Madsen, 1991) and an alternative form of wave-current dispersion relation(Mohiuddin, 1999, 2000) including wave action concept, is to simulate wave propagation in a current field including the irregular waves and discuss applicability of the model in a wave-current field.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.87-94
• /
• 2005

This paper is about the compensation of phase angle error and amplitude difference in stationary 2 pole coordinates by the installation variation of sensor at low cost high resolution digital hybrid encoder. To solve the problem of amplitude difference at the existing hybrid encoder, we normalized the relative magnitude of the two analog signals. and also to solve the problem of installation variation when installed the sensor, we rotate the stationary 2 pole coordinates to compensate the location error of sensor. and we used and tested the QEP function and A/D port in DSP(TMS320F2812) to verify the mentioned proposed method.

• Korean Journal of Materials Research
• /
• v.6 no.11
• /
• pp.1074-1081
• /
• 1996

Mg-8Li-4AI 합금의 부식특성에 미치는 Y의영향을 전기화학적 분극시험 및 침지시험을 통하여 조사하였다. 전기 화학적 분극시험에서는 Y첨가량이 증가함에 따라 활성화 영역이 감소하엿고 부식전위가 증가하였으며, Y이 4.08wt% 첨가된 경우가 Y이 첨가되지 않은 경우에 비해 부식속도가 크게 감소하였다. 침지시험에서도 Y의 첨가량이 증가함에 따라 Y을 첨가하지 않은 시편에 비하여 무게감량 및 부시속도가 감소하였으며, Y이 첨가되지 않은 합금의 부식속도는 침지시간에 따라 급격히 증가하였지만 Y이 첨가되지 않은 합금의 부식속도는 침지시간에 따라 급격히 증가하였지만 Y이 4.8wt% 첨가된 합금은 96시간 이후부터 더 이상 증가하지 않았다. 이러한 결과는 Y 화합물(Mg24Y5)이 $\alpha$/$\beta$계면에서 희생 양극으로 작용하였기 때문이라고 생각된다. 따라서 Y의 첨가는 Mg-Li-AI 합금의 내식성을 향상시키는 역할을 한 것으로 판단된다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.907-914
• /
• 2010

While rubber components are extensively used in automobile vehicle, there are still a lot of difficulties in designing the rubber components applied in complex shapes and preloaded states because of the complicated material properties. In this paper, an efficient experimental method is suggested, which estimates the dynamic stiffness of a rubber component using rubber material test and static stiffness of the bush. And it is verified by comparing with FEM predictions and experimental results. This method is capable of predicting the dynamic stiffness of a rubber bush under various load conditions from minimized test data. Also it estimates dynamic characteristics of a rubber component using rubber material test and FEM calculation.