• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.7-14
• /
• 2004

The lift-off characteristics of the triple flame have been studied experimentally with various mean velocities and concentration gradients using a multi-slot burner, which can control the concentration gradient and the mean velocity independently, Lift-off height, axial maximum velocity, flame temperature, and some other characteristics were examined for methane and propane flame, It was found that minimum values of the lift-off heights exist at a certain concentration gradient for constant mean velocity, and this result implies that the propagation velocity has a maximum value at this condition, OH radical distribution was measured with LIF method and velocity variation along streamline was measured with PlV system. In addition maximum temperature along streamline was measured with CARS system. The intensity of the diffusion flame affects on the propagation velocity of triple flame in the region of very weak concentration gradient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.926-929
• /
• 2000

As the track density of hard disk drives increases, there is a need for more precise actuation of the head. This can be accomplished by using a high band width micro-actuator. In this work, the flying characteristics of sliders with micro-actuators are investigated with the aim to optimize the head/disk interface performance of such sliders. Contact-start-stop, sweep, and flying height tests are performed and analyzed. The results show that the MEMS based micro-actuator mounted on a slider possess acceptable flying characteristics.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.96-100
• /
• 2001

As the track density of hard disk drives increases, there is a need for more precise actuation of the head. This can be accomplished by using a high band width micro-actuator. In this work, the flying characteristics of sliders with micro-actuators are investigated with the aim to optimize the head/disk interface performance of such sliders. Contact-start-stop, sweep, and flying height tests are performed and analyzed. The results show that the MEMS based micro-actuator mounted on a slider possess acceptable flying characteristics.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.501-507
• /
• 2006

Dissolved air flotation (DAF) has been well known for the gravity separation process. The solids to be separated are transferred from the water body to the water surface using micro-air bubbles. DAF has also been used for enhancing solids-liquid separation of industrial and municipal wastewater by adding a its unit parallel to a sedimentation unit to reduce the hydraulic loading in the sedimentation clarifier. This study was to investigate flotation characteristics of activated sludge by the recent DAF technique without chemical agents. In addition, the effect on temperature in flotation of activated sludge and the thickening degree of activated sludge were studied.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.461-466
• /
• 2001

The characteristics of nonpremixed interacting flames are investigated in the parameter of nozzle configuration and nozzle separation distane, s. Three nozzle arrangements - diamond 4 nozzle, linear 5 nozzle and cross 5 nozzle- are used. When s is about 10 nozzle diameter, flames lift from the nozzle at the highest fuel flowrate compared with the other s cases. Normally flames are extinguished at the lifted states. Flowrates when blowout occurs are affected by the nozzle configuration, nozzle seperation distance. Blowout flowrates for the diamond- or cross-shaped nozzle cases are parabolic function of s. For 5 cross nozzle case, flames extinguished at 3.3 times higher flowrate than that of single equivalent area nozzle. Turbulent liftoff heights are not function of flowrates for these cases.

• 상하수도학회지
• /
• 제20권5호
• /
• pp.747-753
• /
• 2006

Air flotation is a solid-liquid separation process that utilizes up-flow microbubbles to thicken activated sludge and enhance clarification efficiency. Continuous air flotation experiments were performed to investigate the effect of operation parameters such as initial MLSS (mixed liquor suspended solid) concentration, air pressure, surface loading rate, air to solid (A/S) ratio, and flotation time on thickening efficiency. An initial activated sludge concentration ranged from 3,000 to 12,000mgSS/L and thickened sludge concentration varied from 6,400 to 28,100mgSS/L. The result showed that the thickening efficiency was mainly dependent on surface loading rate, A/S ratio, and flotation time. The pressure did not affect the thickening efficiency when it kept in the range of 1.6 to 1.8 bar. Experimental results showed that the thickening efficiency of activated sludge was increased only when the feed sludge concentration exceeded 5,000mgSS/L and the thickened concentration was over 20,000mgSS/L. At this time, SS concentration in the clarified liquid was ranged from 5 to 10mg/L.

• 상하수도학회지
• /
• 제25권4호
• /
• pp.471-478
• /
• 2011

A series of laboratory experiments carried out to investigate the particle separation efficiency and flotation characteristics using $CO_2$ bubbles. The primary objective of this study was to find out the feasibility of $CO_2$ bubbles as an applicable unit of flotation process in tap-water and wastewater treatment plant. The fundamental measurements were conducted to characterize the $CO_2$ bubble from the physical viewpoint in water including bubble size distribution and rising velocity under various operational conditions. In addition, the removal efficiency of solid was experimented using the lab scale plant applied $CO_2$ bubbles, namely the dissolved carbon dioxide flotation (DCF) process. The DCF process using carbon dioxide bubble, which is an advantage as the decrease and the reuse of Green-House gas, can be a promising technology as an water treatment process. On the other hand, the further research to decrease the bubble size distribution of $CO_2$ is required to enhance the particle separation efficiency.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1990년도 하계종합학술발표회 논문집
• /
• pp.572-575
• /
• 1990

• 광학과기술
• /
• 제6권1호
• /
• pp.13-18
• /
• 2002

• 유기물자원화
• /
• 제12권2호
• /
• pp.101-109
• /
• 2004

본 연구는 응집 및 부상분리를 이용하여 돈사폐수의 고액분리 특성을 조사하였다. 응집은 jar-tester를 이용하여 응집제 종류 및 주입량에 대해, DAF를 이용한 부상분리에서는 돈사폐수 원수 자체에 대한 부상조건과 pH만을 조정한 원수, 그리고 응집제를 주입한 후 부상을 통한 고액분리 특성을 실험적으로 연구하였다. 돈사폐수를 무기응집제 만으로 응집침전 처리하는 경우 $FeCl_3$ > PAC > Alum 순으로 응집침전효과가 나타났으며, 적정 응집제 주입량은 각각 $1,000mg/{\ell}$, $1,500mg/{\ell}$, $1,500mg/{\ell}$으로 나타났다. 고분자응집제 만으로 응집침전 처리하는 경우 양이온 응집제만이 유효한 응집침전 효과가 나타났으며 적정 응집제 주입량은 $200mg/{\ell}$로 나타났다. 무기응집제와 고분자응집제를 혼합 적용한 경우 각 무기응집제를 $500mg/{\ell}$ 투여한 후 양이온 고분자응집제 주입 농도를 달리하여 응집침전효과를 고찰한 결과 무기응집제의 처리 효율은 $FeCl_3$ > Alum > PAC순으로 나타났으며, 적정 양이온 응집제 주입농도는 $25mg/{\ell}$, $25mg/{\ell}$, $100mg/{\ell}$로 나타났다. DAF를 이용한 부상분리 실험에서 응집처리를 하지 않은 원수와 pH만을 조정한 원수에서의 실험결과를 종합하여 순환비 400%, 압력 4 atm, pH 3이하에서 DAF의 적정 운전 조건이 나타남을 알 수 있었다. 그러나 응집처리를 하지 않은 돈사폐수 원수를 대상으로 DAF를 적정하게 운전하기는 곤란한 것으로 판단되었으며, 또한 무기응집제로만 응집처리한 후 부상분리를 실시하였을 경우 floc의 강도가 약해 floc의 깨짐 현상이 나타나 부상분리가 이루어지지 않았다. 한편 무기응집제와 고분자응집제를 혼합하여 응집처리한 후 부상분리를 실시하는 경우 효과적인 부상분리가 이루어졌으며, Alum $500mg/{\ell}$를 기준으로 양이온 고분자응집제 주입농도가 $50mg/{\ell}$에서 가장 양호한 처리 결과를 나타내었다.