• 한국세라믹학회지
• /
• 제21권3호
• /
• pp.239-244
• /
• 1984

The effect of tetragonal $ZrO_2$ phase on the mechanical behavior in 7 mole% calcia partially stabilized zirconia has been studied. The $ZrO_2$ powder containg 7 mole% CaO prepared by Hot Petroleum Drying Method calcined at 80$0^{\circ}C$ for 1 hour was nearly 100% tetragonal but as the calcining temperature increased certain amount of monoclinic phase appeared. The sintered specimen at 1$700^{\circ}C$ for 5 hours was aged at 130$0^{\circ}C$ for 0, 24, 48, 72 hours. X-ray diffraction data showed that in the aged specimen monoclinic tetragonal and cubic phase coexisted. The Kc value of aged specimen for 48 hr was about 4.5MN/m3/2 much greater than unaged sample. But aged for 72 hr the KiC value was decreased. The increasing of toughness in PSZ is based on the Stress-Induced Phase Transformation that is metastable tetra-gonal $ZrO_2$ changes t stable monoclinic phase within the stress field of crack and the mechanical fracture energy absorption is occured But in this case due to certain amount of tetragonal phase transformed to monoclinic phase during cooling the microcrack effect by transformation also considered. Trerefore both Stress-Induced Phase Transformation and inclusion induced microcracking effect contrbute to the increase of fracture toughness of 7 mole% CaO-$ZrO_2$ containing monoclinic and tetragnola phase simulataneously.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.646-651
• /
• 2008

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. It is essential to choose the optimum material for the process equipment handling molten salt. IN713LC is one of the candidate materials proposed for application in electrolytic reduction process. In this study, yttria-stabilized zirconia (YSZ) top coat was applied to a surface of IN713LC with an aluminized metallic bond coat by an optimized plasma spray process, and were investigated the corrosion behavior at $675^{\circ}C$ for 216 hours in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere. The as-coated and tested specimens were examined by OM, SEM/EDS and XRD, respectively. The bare superalloy reveals obvious weight loss, and the corrosion layer formed on the surface of the bare superalloy was spalled due to the rapid scale growth and thermal stress. The top coatings showed a much better hot-corrosion resistance in the presence of $LiCl-Li_2O$ molten salt when compared to those of the uncoated superalloy and the aluminized bond coatings. These coatings have been found to be beneficial for increasing to the hot-corrosion resistance of the structural materials for handling high temperature lithium molten salts.

• 대한치과보철학회지
• /
• 제60권3호
• /
• pp.263-275
• /
• 2022

구치부 교합지지가 상실되면 수직교합고경이 감소되면서 대합치의 점진적인 정출과 전치부 치아들의 전방 돌출을 초래하게 되고 결국 교합평면이 붕괴됨과 아울러 안모의 변화, 저작 효율 저하, 그리고 측두하악관절 장애 등의 문제가 발생할 수 있다. 이 경우, 정확한 진단 과 예지성 있는 치료계획 수립을 통한 교합평면 재설정 및 수직고경 회복이 필요하다. 본 증례는 71세 여성 환자로, 교합 평면이 붕괴되고 구치부 보철 수복 공간이 부족하여, 수직고경 거상을 동반한 완전구강회복을 계획하였다. 생리적 하악안정위, 연하, 발음, 안모, 전치부 평균 길이 등을 평가하는 임상적 과정을 통해 적절한 수직고경 및 3차원적 교합평면을 재설정하여 임시보철물을 제작하였고, 약 5개월 간 임시 보철물 상태로 악관절 및 저작근의 적응 여부를 관찰하고 교합을 안정화하였다. 기능적, 심미적 임상증상이 없음을 확인한 후 최종 보철 수복하였다. 이러한 환자친화적 완전구강회복 과정을 수행하여 기능 및 심미적으로 만족스러운 결과를 얻었기에 이를 보고하고자 한다.