• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.136-140
• /
• 1992

가전 제품을 비롯한 전기/전자 제품의 고부가가치화를 위해서는 제품 사용 환경의 쾌적함에 저해되는 요인인 진동소음의 발생을 최대한 억제하여야 한 다. 본 연구에서는 진동으로 인하여 발생하는 소음의 저하를 위한 연구의 일 환으로 부분 구조합성법을 이용하여 설계된 제품의 진동특성을 파악하고 진 동을 저하하기 위한 연구를 냉장고를 대상으로 수행하였다. 방진 마운트와 콤프레서 지지판의 최적 설계에 의하여 진동 및 소음의 저하에 기여함으로 써 적용한 연구 방법의 적합성이 인정되었으며 향후 다른 전기 전자 제품의 진동 소음 제어에도 기여할 수 있을 것으로 생각된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.113-116
• /
• 1993

제품의 라이프싸이클이 짧아짐에 따라 제품 개발시 설계평가를 위한 CAE활 용이 필수적인데 본 연구에서는 복잡한 기구물에 대한 시스템적 진동해석에 유용한 부분구조합성법을 이용하여 창문형 에어콘의 진동에 대한 조립해석 을 수행하고 이를 이용하여 배리어와 커버배리어에 대해 구조변경을 통해 강성을 높임으로써 진동량을 저감시키고 이를 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.519-525
• /
• 2010

The finite element (FE) method is generally used to model and simulate the physical behavior of large structures, such as passenger vehicles or aircraft. However, FE analysis involves a very large computation time and cost for developing the analysis model. Therefore, the vibration characteristics of large structural systems are often analyzed using the component mode synthesis (CMS) method, which is one of the substructure synthesis methods. In this study, the vibration characteristics of passenger vehicles are analyzed by using the substructure synthesis method. A passenger vehicle model, which includes a vehicle body, suspension systems, and a sub-frame, is presented. The physical components of the vehicle system are modeled as equivalent substructures using the Craig-Bampton method of CMS. The vibration characteristics, such as the natural frequencies and mode shapes and frequency response, of the vehicle system are determined. The effects of variations in some design parameters on the vibration characteristics of the full vehicle model are also investigated.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.10-18
• /
• 1999

본 논문에서는 대형구조물의 해석에 있어서 부분구조합성법과 섭동법을 이용하여 복잡한 비선형시스템의 해석방법을 제안하였다. 해석방법은 전체시스템을 먼저 몇 개의 분계로 분할한다. 각 분계의 운동방정식에 비선형항이 존재하여도 전체시스템의 지배적 진동모드는 선형모드라는 가정하에 이 시스템의 각 분계를 모드좌표로 변환한다. 이때, 비선형항은 근사적으로 변환한다. 그리고 섭동법을 이용하여 각 분계의 모드좌표방정식은 섭동좌수별로 정식화되어 순차적으로 구해진다. 비선형의 감도는 비선형계수로 정의되고, 그에 상응하는 강성에 의해 구해진다. 제안된 해석방법으로 비선형회전체, 비선형 베어링-페데스탈로 구성된 대형시계구조물의 진동을 해석하였다. 해석방법의 유효성을 평가하기 위해 응답의 정도와 계산소요시간을 유한요소법의 결과와 비교 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.437-442
• /
• 2012

To analyze a multibody system, this paper proposes an implicit numerical integration method for joint coordinates subsystem synthesis method. To verify the proposed method, a multibody model for an unmanned robot vehicle, which consists of six identical independent suspension systems, is developed. The symbolic method is applied to compute the system Jacobian matrix for the implicit integration method. The proposed method is also verified by performing rough terrain run-over simulation in comparison with the conventional implicit integration method. In addition, to evaluate the efficiency of the proposed method, the CPU time obtained by using this method is compared with that obtained by using the conventional implicit method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2201-2210
• /
• 2000

Vibration of a rotating disk-spindle system is analyzed by using Hamilton's principle, FEM and substructure synthesis. A rotating disk undergoes the rigid body motion and the elastic deformation. It s equation of motion is derived by Kirchhoff plate theory and von Karman nonlinear strain. A rotating shaft is described by Rayleigh beam theory considering the axial rigid body motion. The stationay shaft supporting the rotating disk-spindle-bearing system is modeled by Euler beam theory, and the stiffness of ball bearing is determined by A.B.Jones' theory. FEM is used to solve the derived governing equations, and substructure synthesis is introduced to assemble each structure of the rotating disk-spindle system. The developed theory is applied to the spindle system of a 35' computer hard disk drive with 3 disks to verify the simulation results. The simulation results agree very well with the experimental ones. The proposed theory may be effectively expanded to the complex structure of a disk-spindle system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.17-20
• /
• 1999

본 논문에서는 중첩 가산 Sinusoidal 합성방식에서 위상계승에 의한 단위음 연결법과 다프레임간 정현파 크기의 보간법을 제안한다. 그리고 합성 프레임의 중심이 pitch onset time이라고 가정하고, 음성에서 분리한 성도 모델의 위상을 음성 전체의 위상으로 사용하는 방법을 제안한다. 제안한 방법으로 문서-음성 변환 시스템 (Text-to-Speech System, TTS System)을 구현한 결과 단위음 연결시 연결부분의 파형 왜곡이 감소함을 알 수 있었고, 부드럽게 연결된 합성음을 얻을 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.201-206
• /
• 2000

In this work transfer function synthesis method based on FRF data of each substructure is investigated for a complex structure composed of many substructures. Though the transfer function synthesis method has superiority to analyze the characteristics of interfaces among substructures effectively, many problems arise in the computation process, especially matrix inversion process. Due to computational problems, the error between the data obtained by test and the predictions through computations is inevitable. So in this paper, computational aspects in the transfer function synthesis method are examined through a steering system problem of passenger car. For the FBS method, frequency response functions of 3 substructures are measured experimentally. Effects of several parameters such as matrix inversion method, connection conditions between substructures and off-diagonal terms on system response are studied numerically.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.5
• /
• pp.33-50
• /
• 1989

In this paper, musical tone, especially instrument tones are synthesized using nonlinear distortion technique. Nonlinear distortion is very simple but versatile method when you synthesize musical instrument tones. It basically consists of one sine oscillator and amplifier which makes distortion to Input wave. Output wave has many harmonics that can be controlled by varying shaping function, which is the transfer function of nonlinear amplifier. Shaping function Is obtained from the analyzed harmonic amplitude data. Given harmonics amplitudes, Chebyshev polynomial is used to produce the shaping function that exactly makes the given harmonics at steady state. We contructed non -real time nonlinear distortion synthesizer program running at IBM-PC. To quantify the satis faction of synthesised tones, listening test is carried out, and the result is presented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.69-77
• /
• 2017

By producing pre-engineered modular system in the factory, It is enable to expedite construction and can be distinguished from two types by the method resisting load. One is the open-sided modular system composed of beams and columns. The other is enclosed modular system composed of panels and studs. Of the modular systems, the open-sided modular system buildings the connection between modules are difficult due to closed member sections, and the overall strength is reduced as a result of local buckling. In this study, in order to solve these problems, a modular system with folded steel members filled with concrete are proposed. The capacity spectrum method presented in ATC 40 is used for seismic performance assessment of the proposed model structure and the structure with conventional steel members. The analysis results show that at the performance point of each model the number and rotation of plastic hinge formed in the proposed modular system are smaller than those in the conventional system. Based on this observation it is concluded that the proposed system with composite sections has superior seismic capacity compared with conventional system.