• Journal of the KSME
• /
• v.34 no.11
• /
• pp.845-858
• /
• 1994

1988년 이전에는 한국의 석유화학공장은 다른 나라에 비하여 관리상태나 손해상황이 양호한 공 장으로 여겨져 거의 안전도조사(underwriting survey)가 실시되지 않았으나 1989년 이후부터 보험사고가 급격히 증가, 보험금 지급이 많아져 위험조사를 실시한 후 보험을 인수하게 되었다. 일반적으로 석유화학공업의 내용연수는 15년에서 20년으로 보고 있으며 미국, 일본 등 선진국 에서도 건설한지 20년을 전후해서 사고가 다발한다는 점은 국내 석유화학공장의 안전성 확보대 책에서 중요한 점을 시사한다. 석유화학공업의 안전성 확보대책으로서 해외재보험자가 요구하고 있는 "경영전반적인 위험관리"를 도입 추진하여야 할 것으로 사료된다. 여기에는 사전적 손해 방지대책을 포함하는 위험통제는 기본적으로 이루어져야 하며 사후적 대책인 위험재무도 경영 효율이 극대화되도록 하여야 한다. 그러나 최근 들어 국내공장의 사고빈발로 해외재보험자들이 재물손해의 자기부담금액(deductible)인상(business interuption)의 Time Excess연장(7일에서3 0일) 등의 보험조건을 강화하고 있다. 따라서 외국의 사고 경험에 비추어 국내 플랜트의 내용연 수가 거의 다 되어서 사고발생위험이 잠재하고 있고 석유화학공업의 특성상 사고빈도는 낮으나 손해규모가 대규모이고 국가경제에 기여하는 비율이 타산업에 비해 월등히 크다는 점 등에서 안전대책에 대한 경영자의 관심제고를 밑바탕으로 한 위험관리의 정착화, 안전기준 등의 국제 수준으로 향상 및 전문기술인력 확보를 통하여 사고발생 억제에 대하여 소홀히 해서는 안된다고 사료된다.안된다고 사료된다.작 원리 및 제조방법에 대하여 기술한다. 2차원 그래픽의 기능만으로도 충분한 역할을 수행할 수 있지만, 그 다음 단계인 기본설계나 상세설계와의 자료 공유를 생각하면, 3차원 그래 픽이 필요하다. 다만, 3차원 그래픽 기능을 추가하기 위해 많은 노력이 요구되는데, 현재 PHIG S와 x-window가 결합되어 PEX라는 라이브러리로 개발되고 있으므로 차후의 연구에 포함될 수 있을 것이며, 이 글에서는 간단한 2차원 그래픽 기능만을 이용하였다. 앞으로 PEX의 기능을 적 절히 구사하면, 좋은 효과를 볼 수 있을 것이다. 279cm 되게 하고 선축은 팬톰의 27번 절편과 28번 절편의 접변과 최대 전단면의 교차선과 일치시켜 양방향에서 15분씩 조사하여 전단면에서 선량을 측정하였다. 팬톰내 선축상 중앙점의 선량을 기준으로 다른 부위의 선량을 비교하였다. 두경부와 복부, 폐의 하반에서 선량의 차이는 $\pm$ 10% 이내였고, 폐의 상반과 어깨와 골반 부위에서 선량은 10%이상 저선량을 보였다. 특히 어깨부위에는 30%이상 저선량을 보였다. 이로부터 서울대병원과 유사한 조건에서 코발트로 전신조사하는 경우에는 폐나 두경부에 대응하는 조직보상체를 이용하기보다는 어깨부위에 선량을 추가하는 것이 바람직할 것이라고 생각한다.alpha$ 부분공간들의 합공간 역시 on-semistrbtifiable over $\alpha$ 하다. 6. 폐연속 net-cevering 함수에 의하여 cn-semistratifiable over $\alpha$ 성질이 보존된다. 보잘것이 없었고, 현재에도

• Journal of Chest Surgery
• /
• v.29 no.1
• /
• pp.79-85
• /
• 1996

A clinical evaluation was performed on 305 cases of chest trauma experienced at the department of the Thoracic and Cardiovascular Surgery, Dae Jeon Eul Ji Hospital, during the period from March 1991 to November 1994. Age distribution was from 4 to 85 years, the mosts common age groups were 4-th, 5th and 6th decades. The ratio of male to female was 229:76(3:1), the ratio showed male predominance, the most common cause of trauma was traffic accidents in nonpenetrating trauma and stab wounds in penetrating trauma. Hemothorax, pneumothorax, and hemopneumothorax were observed in 159 cases (52.1 %) of total cases, Rib fracture was observed in 236 cases (77.4%) of total cases, location distribution was right : left : Both (102 : 142 : 45), with left predominant, rib fracture commonly involved from the 3th to 8th rib. Lag period from accident to admission was 155 cases (50.8%) under 6hr The principles of therapy for early complications of chest trauma were rapid r expansion of the lungs by thoracentesis 5 cases(1.6%) and closed thoracostomy 1-42 cases(46.6%), but open thoracotomy had to be done on 17 cases (5.6%) because of massive bleeding 13 cases or ruptured diaphragm, foreign body. Conservative nonoperative treatment was 140 cases (45.9%). Overall mortality rate was Bcases (2.6%) and common causes of the death were respiratory insufficiency and shock.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.395-407
• /
• 2019

The duplex system has been considered as an important slip-transfer mechanism to evaluate the evolution of orogenic belts. Duplexes are generally found in the hinterland portion of fold-thrust belts and accommodate large amounts of total shortening. Thus, understanding its geometric and kinematic evolution can give information to evaluate the evolution of the entire orogenic belt. Duplexes are recognized as closed-loop thrust traces on map view, indicating higher connectivity than imbricate fans. As originally defined, a duplex is an array of thrust horses which are surrounded by thrust faults including the floor and roof thrusts, and imbricate faults between them. Duplexes can accommodate regional layer-parallel shortening and transfer slip from a floor thrust to a roof thrust. However, an imbricate fault is not the only mean for layer-parallel shortening (LPS) and displacement transfer within duplexes. LPS cleavages and detachment folds can also play the same role. From this aspect, a duplex can be divided into three types; 1) fault duplex, 2) cleavage duplex and 3) fold duplex. Fault duplex can further be subdivided into the Boyer-type duplex, which was firstly designed duplex system in the 1980s that widely applied most of the major fold-thrust belts in the world, and connecting splay duplex, which has different time order in the emplacement of horses from those of the Boyer-type. On the contrary, the cleavage and fold duplexes are newly defined types based on some selected examples. In the Korean Peninsula, the Yeongwol area, the western part of the Taebaeksan Zone of the Okcheon Belt, gives an excellent natural laboratory to study the structural geometry and kinematics of the closed-loops by thrust fault traces in terms of a duplex system. In the previous study, the Yeongwol thrust system was interpreted by alternative duplex models; a Boyer-type hinterland-dipping duplex vs. a combination of major imbricate thrusts and their connecting splays. Although the high angled beds and thrusts as well as different stratigraphic packages within the horses of the Yeongwol duplex system may prefer the later complicate model, currently, we cannot choose one simple answer between the models because of the lack of direct field evidence and time information. Therefore, further researches on the structural field investigations and geochronological analyses in the Yeongwol and adjacent areas should be carried out to test the possibility of applying the fold and cleavage duplex models to the Yeongwol thrust system, and it will eventually provide clues to solve the enigma of formation and its evolution of the Okcheon Belt.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.490-501
• /
• 1994

In this study the problems of cell marking method used in the field of ATM network traffic control are presented. Also an extended cell marking method considering the user level priority is proposed. The conventional traffic monitoring schemes set the CLP bit of a cell to 1 only under the circumstance of the violation of traffic contract. It causes that the number of low level cells increases and the levels of cells are lowered regardless of the user level priority. The three level priority control method combining FCI bit with CLP bit has also been proposed. It divides CLP=0 cells into two levels. Consequently, the proposed method preserves more cells in high level than the conventional one and the real loss of high level cells can be reduced. The performance of the proposed scheme has also been analyzed by the PBS(partial buffer sharing) with two thresholds for the proposed three levels. The result shows that the PBS with two thresholds can give more efficient control than the scheme with no priority, or the PBS with one threshold.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.342-342
• /
• 2023

메콩강을 공유하는 6개국은 주로 강의 개발과 수자원의 활용을 통해 경제성장을 이룩하고 있다. 하지만, 각국의 산업화나 경제성장의 수준, 메콩강에 대한 의존도와 관심, 전략 등이 서로 달라 개발에 따른 국가 간 수자원 공유, 환경피해, 지역보존 등의 문제들이 발생하고 있다. 메콩지역의 국가 중 베트남은 하천유역의 많은 부분이 국가공유하천으로 인접국가의 유역개발에 따라 다양한 물 분쟁이 발생할 수 있으며, 잦은 홍수피해가 발생하고, 낙후된 사회인프라로 인해 이수 및 수질오염과 관련된 물 문제 역시 지역적으로 발생하고 있다. 해당지역의 물 문제해결을 위한 정책결정의 지원을 위해서는 수리·수문학적 기초 또는 상세 분석이 필요하며, 본 연구에서는 매년 홍수와 대규모 범람, 비효율적 댐운영으로 인한 가뭄, 염수침입 등의 물 문제가 발생하는 Ca River 유역을 대상유역으로 선정하고 K-series SW 기반의 홍수범람 해석을 수행하였다. K-water에서 개발된 다양한 K-Series SW 중 연구대상유역인 Ca River 하류 유역에 대한 적용에 적합한 모형을 기존 현황조사 등을 바탕으로 1차원 하천흐름해석을 위한 K-River, 2차원 홍수범람해석을 위한 K-Flood 모형을 선정하고 분석을 수행하였다. 2010년과 2013년의 홍수기를 대상으로 K-River모형을 이용하여 Ca river 하류의 수리학적 현상을 해석하였으며, 해당 결과를 기반으로 K-Flood 모형을 이용한 2차원 홍수범람해석을 수행하고 실제 범람지도와의 비교를 수행하였다. 그리고 결과검토를 통해 모의 결과가 수위에 대해 높은 재현성을 보이고 있으며 범람면적과 침수심의 모의결과가 실제 침수양상과 비슷한 양상을 보임을 확인하였다.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.569-583
• /
• 2004

The rock properties of the West pagoda in the Gameunsaji temple site are composed mainly of dark grey porphyritic granodiorite with medium grained equigranular texture and developed with small numerous dioritic xenoliths. These xenoliths occurred with small holes due to different weathering processes. As a weathering results, the rock properties of this pagoda occur wholly softened to physical hardness because of a complex result of petrological, meteorological and biological causes. Southeastern part of the pagoda deteriorated seriously that the surface of rock blocks showed partially exfoliations, fractures, open cavities in course of granular decomposition of minerals, sea water spray and crystallization of salt from the eastern coast. The Joint between blocks has small or large fracture cross each other, contaminated and corrupted for inserting with concrete, cement mortar, rock fragments and iron plates, and partially accelerated coloration and fractures. There are serious contamination materials of algae, fungus, lichen and bryophytes on the margin and the surface on the roof stone of the pagoda, so it'll require conservation treatment biochemically for releasing vegetation inhabiting on the surface and the discontinuous plane of the blocks because of adding the weathering activity of stones and growing weeds naturally by soil processing on the fissure zone. Consisting rock for the conservation and restoration of the pagoda would be careful choice of new rock properties and epoxy to reinforce for the deterioration surfaces. For the attenuation of secondary contamination and surface humidity, the possible conservation treatments are needed.

• Conservation Science in Museum
• /
• v.26
• /
• pp.161-182
• /
• 2021

A jungwangu, a type of medium-sized mortar, is a firearm with a barrel and a bowl-shaped projectileloading component. A bigyeokjincheonroe (bombshell) or a danseok (stone ball) could be used as a projectile. According to the Hwaposik eonhae (Korean Translation of the Method of Production and Use of Artillery, 1635) by Yi Seo, mortars were classified into four types according to its size: large, medium, small, or extra-small. A total of three mortars from the Joseon period have survived, including one large mortar (Treasure No. 857) and two medium versions (Treasure Nos. 858 and 859). In this study, the production method for medium mortars was investigated based on scientific analysis of the two extant medium mortars, respectively housed in the Jinju National Museum (Treasure No. 858) and the Korea Naval Academy Museum (Treasure No. 859). Since only two medium mortars remain in Korea, detailed specifications were compared between them based on precise 3D scanning information of the items, and the measurements were compared with the figures in relevant records from the period. According to the investigation, the two mortars showed only a minute difference in overall size but their weight differed by 5,507 grams. In particular, the location of the wick hole and the length of the handle were distinct. The extant medium mortars are highly similar to the specifications listed in the Hwaposik eonhae. The composition of the medium mortars was analyzed and compared with other bronze gunpowder weapons. The surface composition analysis showed that the medium mortars were made of a ternary alloy of Cu-Sn-Pb with average respective proportions of (wt%) 85.24, 10.16, and 2.98. The material composition of the medium mortars was very similar to the average composition of the small gun from the Joseon period analyzed in previous research. It also showed a similarity with that of bronze gun-metal from medieval Europe. The casting technique was investigated based on a casting defect on the surface and the CT image. Judging by the mold line on the side, it appears that they were made in a piece-mold wherein the mold was halved and using a vertical design with molten metal poured through the end of the chamber and the muzzle was at the bottom. Chaplets, an auxiliary device that fixed the mold and the core to the barrel wall, were identified, which may have been applied to maintain the uniformity of the barrel wall. While the two medium mortars (Treasure Nos. 858 and 859) are highly similar to each other in appearance, considering the difference in the arrangement of the chaplets between the two items it is likely that a different mold design was used for each item.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.309-318
• /
• 2015

The staff given with chair to Yi Gyeong-seok, senior official over 70 years old by King Hyeonjong of Joseon Dynasty is representative handcraft of Joseon Dynasty. Results of analysis on the metallic decoration show that the metallic ornament of the end part which is connected to the spade was made by rolling of iron plate and brass plating. The plated part is limited to the ornament of the end part connected to the spade and the plating was not applied to the spade. Brass including 20% zinc was used for the connecting part of guard while brass gilded iron was used for the spade. This suggests that the tone of the connecting part of the guard and the spade was not different for reason of visual harmonization. Potential applied plating method can be amalgam, dippping in molten brass, and brushing but the analysis result suggests that dipping in molten brass method is the most likely accepted method. The brass guard of knife was joined by tin-lead solder. Rivet used to fix the blade was made by pure iron as an optimum material which satisfies flexibility and strength.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.75-86
• /
• 2007

In Korea, it is significantly deficient in the study about tourism geology, which is a new branch of applied geology that would support the growth of ecotourism world-wide. The objectives of this study include (1) the promotion in geodiversity of tourism geology using the data for type and distribution patterns of geological and geomorphological landscape resources and (2) the redoubling of diversity in the environmental interpretation programs offered by the Korea National Parks Service (KNPS). Our field study discovered 212 geological and geomorphological landscape resources distributed in the area of Taean seashore national park. Coastal topography is the most discovered type followed by weathering topography. It is our belief that the aforementioned resources can be utilized as a tourism geological site in assisting the public to understand geological science and to draw their attention and interests after sorting and filtering it out through discussions with geologists and geomorphologists of a consortium. Furthermore, in order to promote the activation of developing user-oriented geotourism sites, it is recommended to keep monitoring on demographical characteristics of geotourists, behavioral characteristics of geotouconrists within the geotourism site and ducting analysis for developing geotourism program and events. And, the research support of geological engineering dealing with the estimation of weathering degree and the development of conservation techniques for the object of geotourism along with the research of environmental science aspects will improve the activation of tourism geology.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.181-193
• /
• 2018

The present study was conducted to analyze the quality of the habitats of Abies koreana WILS. by using the InVEST model based on the analytic hierarchy process (AHP) technique and to evaluate the economic value by estimating the carbon fixation. Abies koreana WILS., an original biological species of South Korea, may be an essential element in establishing the national biological sovereignty in the future. The subjects of the present study were the national parks in Mt. Halla, Mt. Jiri, and Mt. Sobaek, which are the habitats of Abies koreana WILS. As suggested by previous studies as a limitation of the InVEST model, the utilization of the data from relevant international publications as the input data, due to the lack of the domestic input data, may decrease the accuracy of the modeling. Therefore, the AHP technique was applied for the input data. The modeling was performed with reference to the years of 1980, 1990, and 2000 for the scenario analysis. The result of the modeling showed that the habitat quality was changed most in the national park in Mt. Halla, as the habitat quality score was decreased from 0.96 in 1980 to 0.97 in 1990 and 0.94 in 2000. In the national part of Mt. Sobeak, the habitat quality was changed most in the sub-alpine zone, as the habitat quality score was decreased from 0.98 in 1980 and 0.98 in 1990 to 0.97 in 2000. The habitat quality was best conserved in the national part in Mt. Jiri, as the habitat quality score was 0.98 in 1980, 0.99 in 1990, and 0.99 in 2000. The estimated economic loss by the change of the habitat quality was 19,280,000 USD for Mt. Halla and 8,030,000 USD for Mt. Sobeak. In the present study, the habitat quality of the Abies koreana WILS, the original species of South Korea, was evaluated and the economic value of the ecological services provided by the habitats was estimated quantitatively. The result showed that the ecosystem service model may be used to qualitatively analyze the quality of a habitat located in a specific region and to estimate the economic value quantitatively. The objective evaluation of ecosystem services demonstrated in the present study may be applied to promote sustainable utilization of natural resources and conservation of the ecosystem by predicting the changes that may be caused by external factors including the development of preservation areas.