• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.15-17
• /
• 2001

BLDC 전동기의 제작시 영구자석의 가격은 전체 가격을 결정하는데 높은 비중을 갖는다. 이런 영구자석의 크기를 최적화시킬 수 있다면 비용절감이 예상된다. 본 논문은 BLDC 전동기에서 고가(高價)의 영구자석의 재료비용을 절감시키기 위한 설계방법을 제시한다. 기본적인 설계방법은 영구자석 내부에서 적정한 동작점을 갖는 한계 내에서 영구자석의 크기를 줄이는 것이다. 그리고 전동기의 전체크기를 비례적으로 증가시킴으로써 요구되는 기본파 자속을 보상한다. BLDC 전동기의 자기적 특성은 유한요소법을 사용하여 해석하였다. 회전자의 위치에 따라 계산되는 유한요소 해석결과의 magnetic vector potential을 이용하여 권선의 자속을 계산하였고, 기본파의 성분은 푸리에 변환으로 얻었다. 설계사례로서 영구자석 대 기타부분의 비용을 각각 80/20, 70/30, 60/40, 50/50으로 가정할 때 기존 전동기 비용에 대해서 크기가 새로이 조정된 전동기 비용을 비교 검토하였다.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.333-342
• /
• 1997

The objective of this research was to develop model equations for measuring rice milling ratio by using visible / HIR spectroscopy. Twelve kinds of brown rice(n = 149) were milled to obtain various milling ratio ranged from 86% to 94%. Visible/NIR spectra were collected with a spectrophotometer with sample transport module. The reflectance and transmission spectra were measured in the range of 400~2, 500nm and 600~1, 400nm, respectively, with 2 nm intervals. Multiple linear regression(MLR), Partial least square (PLS), and Artificial neural network(ANN) were used to develop models. Model developed with reflectance spectra showed better prediction results then those with transmission spectra. The MLR model with six-wavelength obtained from first derivative spectra gave to the best results for measuring the rice milling ratio(SEP = 0.535, , $r^2$ = 0.980). The PLS model(SEP = 0.604, $r^2$= 0.976) and ANN model(SEP = 0.566, $r^2$= 0.978) also can be used to determine the rice milling ratio effectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.179-179
• /
• 2010

다양한 분야에서 확산 방지막은 소자의 신뢰성 향상에 중요한 역할을 하고 있다. 최근 반도체에 적용되기 시작한 구리 배선 형성 공정에서도 실리콘이나 실리콘 산화막으로 구리가 확산하는 것을 방지하는 기술이 중요한 부분을 차지하고 있다. 기존 physical vapor deposition (PVD)법을 이용한 $TaN_x$ 확산 방지막 형성 기술이 성공적으로 적용되고 있으나 반도체의 최소선폭이 지속적으로 감소함에 따라 한계에 다다르고 있다. 20 nm 급과 그 이하의 구리 배선을 위해서는 5 nm 이하의 매우 얇고 높은 피복 단차율을 가진 확산 방지막 형성 기술이 요구된다. 또한, 요구 두께의 감소에 따라 더 우수한 확산 방지 특성이 요구된다. Atomic layer deposition (ALD)은 박막의 정교한 두께 조절이 가능하며 높은 종횡비를 가지는 구조에서도 균일한 박막 형성이 가능하다. 이번 연구에서는 다른 질소 함량을 가진 $TaN_x$ 박막을 Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT) 전구체와 $H_2+N_2$ 반응성 플라즈마를 사용하여 plasma enhanced atomic layer deposition (PEALD) 법으로 형성하였다. 박막 내질소 함량에 따라 $TaN_x$의 상 (phase)과 미세구조 변화가 관찰되었고, 이러한 물성의 변화는 확산 방지 특성에 영향을 주었다. TEM (Transmission electron microscopy)과 SEM (scanning electron microscope), XPS (x-ray photoelectron spectroscopy)를 통해 $TaN_x$의 물성을 분석하였고, 300 도에서 700 도까지 열처리 후 XRD (x-ray deffraction)와 I-V test를 통해 확산 방지막의 열적 안정성이 평가되었다. PEALD를 통해 24 nm 크기의 trench 기판 위에 약 4 nm의 $TaN_x$ 확산 방지막이 매우 균일하게 형성할 수 있었으며 향후 구리 배선에 효과적으로 적용될 것으로 예상된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.35-41
• /
• 1988

In the three dimensional deformation analysis by terrestrial photographs, iterative reweighted similarity transformation method is used for more accurate displacement computation. Also, Bayesian Inference method is used in the detection of unstable points and the analytical method for displacement patterns analysis is proposed in this study. In results, the accuracy of displacement estimation was improved by applying the weights of least absolute method ($\Sigma$｜d｜⇒min) and more accurate detection of displaced points could be achieved by Bayesian Inference. The analytical method in the patterns of displacement proposed in this study could be adapted to the movement analysis of objects wholly or partly.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.256-265
• /
• 1997

The objectives of this study were to examine the ability to predict soluble solid and firmness in intact apples based on the visible/near-infrared spectroscopic technique. Two cultivars of apples, Delicious and Gala, were handled, tested and analyzed separately. Reflectance spectra, Magness-Tayor (MT) firmness, and soluble solids in apples were measured sequentially. Maximum and minimum diameters, height, and weight of apples were recorded before the MT firmness tests. A spectrophotometer was used to collect reflectance spectra of intact apples over a wavelength range of 400 to 2, 498 nm. The W firmness tests were conducted using a standard 11.1mm (7/16 in.) MT probe mounted in an Instron universal testing machine. A digital refractormeter was used to measure soluble solid contents in the apples. Apple samples were divided into a calibration set and a prediction set. The calibration set was used during model development, and the prediction set was used to predict soluble solids and firmness from unknown spectra. The method of partial least square (PLS) analysis was used. An unique set of PLS loading vectors (factors) was developed for soluble solid content and firmness. The PLS model showed good correlations between predicted and measured soluble solids of intact apples in 860～1078 nm of the wavelengths. However, the PLS analysis was not good enough to predict the apple firmness.

• Journal of Biomedical Engineering Research
• /
• v.22 no.6
• /
• pp.497-502
• /
• 2001

Influence of other blond components on measuring glucose concentration was analyzed B)food phantom containing five major components was made. The prediction model was developed based on the measurement of absorption spectra including the first overtone glucose band, i.e.. 1500 ∼ 1850 nm. The concentrations were Predicted using the Partial least squares regression. Factor analysis based on Design of Experiment was Performed to study the influence of other components in predicting glucose concentration. Triglyceride does not influence. Albumin and globulin haute minor effects. However, hemoglobin showed substantial response and the compensation of hemoglobin concentration appears to be required for the model of glucose measurement.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.437-444
• /
• 2017

Stress concentrations around discontinuities, such as a hole in cross section of a structural member, have great importance because the most materials failure around the region may be occurred. Stress on the point applied by concentrated load reaches much larger value than the average stress in structural member. In this paper, stress analysis was performed for the plate with a partial through-hole to find the difference of the principal stress distribution. The difference between maximum principal stress and minimum principal stress in photoelasticity is equal to the value obtained by multiplying the isochromatic fringe order by the fringe constant of the material divided by the distance through which the light passes, that is, the thickness of the specimen. Since the difference of principal stress is proportional to the photoelastic fringe order, the distribution of the principal stress difference by the finite element analysis can be compared with the photoelasticity experimental result. ANSYS Workbench, that is the finite element software, is used to compute the differences of principal stresses at the specific points on the measured lines. The computation values obtained by ANSYS are compared with the experimental measurements by photoelasticity, and two results are comparable to each other. In addition, the stress concentration factor is obtained using the stress distribution analyzed from the variation of hole depth. Stress concentration factor is increasing, as the depth of hole increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3087-3093
• /
• 2009

Digital filters are indispensible element in digital signal processing area. The performance of digital filter based on adding and multiplying operation, such as computational speed and power consuming is determined by the orders and coefficients of filter which has on effect area of semiconductor chip when it is implemented by VLSI technology. In this research, in order to performance improvement of digital filter, we proposed the algorithm to speed-up the operation of digital filter associated with the minimum signed digit representation of binary number system and method to simplify the digital filter design associated with common subexpression elimination. The performance of proposed method is evaluated by the computational speed and design-simplicity by experimental implemented digital filter on FPGA.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.49-58
• /
• 2020

In this study, we solve an online multi-object problem which finds object states (i.e. locations and sizes) while conserving their identifications in online-provided images and detections. We handle this problem based on a tracking-by-detection approach by linking (or associating) detections between frames. For more accurate online association, we propose novel online appearance learning with discrete fourier transform and partial least square analysis (PLS). We first transform each object image into a Fourier image in order to extract meaningful features on a frequency domain. We then learn PLS subspaces which can discriminate frequency features of different objects. In addition, we incorporate the proposed appearance learning into the recent confidence-based association method, and extensively compare our methods with the state-of-the-art methods on MOT benchmark challenge datasets.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.14-14
• /
• 2020

일반적으로 수문빈도해석은 치수계획 수립에 이용되는 설계강수량, 계획홍수량 등을 산정하기 위해 연최대치계열 또는 연초과치계열 자료를 이용한 극치빈도해석을 수행하고, 확률분포의 우측꼬리(right tail) 부분을 이용하여 확장된 재현기간에 해당하는 확률수문량을 추정한다. 하지만 가뭄 관련 분석에서는 확률분포의 좌측꼬리(left tail) 부분은 이용해 확장된 재현기간별 확률수문량을 추정해야할 경우가 발생한다. 또한 물관리 실무에서 장 단기 운영계획 수립을 위해 이용하는 갈수빈도 유입량 산정 등에서도 평년보다 작은 수문량에 대한 빈도해석이 필요한 경우가 있다. 국가 가뭄정보분석센터에서는 기존에 K-water연구원에서 개발한 빈도해석 프로그램인 K-FAT의 분석모듈을 이용해 극소치계열 또는 갈수빈도 유입량 분석에 특화된 가뭄빈도해석 프로그램을 개발하였다. 본 프로그램은 GEV, Gumbel, Weibull 등 14개의 확률분포형을 포함하며, 모멘트법, 최우도법 및 L-모멘트법을 사용하여 매개변수를 추정한다. 적합도 검정의 경우 χ², K-S, CVM, PPCC 및 수정 Anderson-Darling test를 이용하여 다각적인 검정을 할 수 있도록 하였다. 분석을 위한 입력 자료의 경우 사용자가 전처리를 통해 준비한 연최소치계열 등 연도별 시계열자료를 이용할 수 있으며, 일단위 및 월단위의 강수량 또는 댐 유입량 자료를 이용해 사용자가 원하는 기간의 누적강수량, 평균 유입량으로 변환할 수 있는 자료변환 기능을 추가하여 실무 활용성을 높였다. 또한 최적 확률분포 선정을 위해 참고할 수 있도록 AIC(Akaike information criteria)와 BIC(Bayesian information criteria) 분석이 포함되어 있으며, Bootstrap 기법 등을 이용한 불확실성 산정을 통해 추정 값의 신뢰구간을 표시하도록 하였다. 개발된 프로그램은 베타버전 시험배포를 거쳐 가뭄정보포털을 통해 배포할 예정이다.