• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.432-438
• /
• 2019

Accurate impression taking for the success of implant prosthesis is a very important process. Methods of taking implant impression include the conventional method using impression coping and impression material, and the digital method using an intraoral scanner and scanbody. However, the impression coping or the scanbody must install after remove healing abutment. Because of this, the dentist must repeat the process of removing and installing the healing abutment, the impression coping or the scanbody several times. In addition, the impression coping or the scanbody rises higher than the occlusal surface, so the patient has the inconvenience of constantly maintaining the open state. Recently, a scannable healing abutment, which can be scanned by a intraoral scanner directly, without the need to remove the healing abutment by applying a scannable part of the scanbody to the healing abutment, was introduced. We present a case of single posterior implant prosthesis using a scannable healing abutment.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.147-155
• /
• 2007

본 연구는 기술개발 자체의 효과성을 개발된 기술의 시장성, 확대 보급가능성, 민간분야의 기술 로드맵과의 관계성을 도출하는 것으로 실제로 업계에서 다양한 인맥과 프로젝트의 경험을 가지고 있는 자에 의한 심층인터뷰를 근거로 한 정성적 판단과 시장조사를 통한 정량적 판단을 결합하여 멀티센서의 기술개발의 가치를 평가하는 후속 조치에 해당되는 연구이다. 직접적 측면의 산업적 파급효과는 2006년에는 시범적인 수준에서 적용된 사례를 중심으로 정리해 본 결과, 다음과 같이 요약될 수 있다. 첫째, 전문화된 기업의 경우 각자의 강점에 기반을 두어 멀티센서의 적용시장을 바라보고 있다는 점이다. 모든 소프트웨어의 생산을 서버 부분부터 웹 버전, 모바일 버전까지 모두 보유하고 있는 벡터 부분의 GIS 수준과는 달리 위성영상 및 멀티센서 분야의 소프트웨어는 대용량으로 인한 한계로, 서버중심, 웹 중심의 개발이 이루어지고 있으나 모바일 분야까지 확장되지는 않고, 차량항법장치와의 연계를 통한 확장을 꾀하는 수준이라고 요약할 수 있다. 둘째, 전문기업이 아닌 대기업의 시장분석 및 전략에 관한 부분을 요약하자면, 멀티센서와 직접적인 연관을 갖는 회사는 많지 않으나 대체로 U-city 사업 발굴 시 멀티센서가 융합기술이 요소기술로서 기여할 수 있을 것이라는 기대는 하고 있으며, 규모도 1,000억 원 대를 상회할 것으로 바라보고 있다. 셋째, 멀티센서 개발기술의 상용화 및 산업화를 위한 제거 요소 및 감소 요소, 증가 요소 및 새로이 만들어야 할 요소 등을 다차원 전략으로 제시하였으나, 전략을 구사할 기관이 산재되어 있어 제도적 차원의 뒷받침이 기술개발과 더불어 진행되어야 한다는 결론에 이르게 된다. 넷째, 개발된 4개의 기술에 대하여 KVA에서 산출한 기업평가 방식을 변형하여 적용하였는데, 위성영상과 DEM 개발기술이 87% 이상의 점수를 받아 가장 시장성 및 활용성이 높은 기술로 평가되었으며, 초다분광영상에 대한 기술은 70%를 겨우 넘는 수준에서 평가가 되었다. 멀티센서 공간영상정보 통합처리 기술 개발은 다목적 실용위성의 보유, 국가 NGIS 사업의 결과물이 상당히 축척이 되어 있고, 라이다(LiDAR) 기술의 도입을 위한 환경이 조성되었기에 다른 국가에 비해 멀티센서 기술의 적용과 산업화가 가시화 될 수 있을 것으로 기대된다. 그러나 멀티센서 자료의 수급이 용이하지 못하고, 법 제도적인 한계, 시장의 성숙도가 기대이하라는 점 등의 한계를 노정하고 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2005

In this paper, peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) with respect to the subchannel coding schemes for interchannel interference (ICI) self-cancellation is analyzed. It is shown theoretically and experimentally that a shaping component is generated in the transmitted sequence in the conventional correlative coding where a pair of antipodal signals is assigned in adjacent subchannels. Due to the shaping component, the signal powers in the mid and edges of a symbol are scaled by different weighting coefficients, resulting in increased PAPR. To overcome this problem a simple adjacent subchannel coding scheme is presented in this paper. In the new scheme, the shaping component caused by partial repetition of signals is eliminated by assigning a pair of signals in which phase difference varies signal-to-signal. As results, the new scheme has 2-3 dB smaller PAPR than the conventional ICI self-cancellation OFDM while maintaining much higher carrier-to-interference ratio than a normal OFDM system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.17-22
• /
• 2017

In this study, we designed the metallic reception part of a patch antenna using the phase field design method. The design object function is formulated with the S-parameter value which represent the return loss so that it is targeted to maximize radiation efficiency at a target frequency. The initial model of a patch antenna was designed via the ordinary theory based approach and its performance was enhanced by changing the structural configuration of the metallic part using the phase field design method combined with the double well potential functions. The final shape was proposed by removing the gray scale area along the structural boundary by employing a cut-off method. The proposed shape shows that the radiation efficiency at target frequency is significantly improved compared with the initial patch shape. The finite element analysis and optimization precess was performed using the commercial package COMSOL and Matlab programming.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.752-757
• /
• 1997

Crude papain extracted at optimum condition was purified with an ethanol precipitation method. Four factors of protein recovery method were optimized by response surface methodology (RSM) and the function was expressed in terms of a quadratic polynomial equation. Adequacy of the model equation for optimum response values was tested and optimum conditions of protein recovery were 38.2 mg/mL of protein, ethanol concentration of 40% and precipitation temperature of $-8^{\circ}C$. The experimental value (68.97%) for recovery yield was closed to the predicted value (77.28%) under these conditions.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.509-515
• /
• 1997

Crude papain was extracted from papaya latex under various conditions. Extraction conditions of crude papain were optimized by the response surface methodology (RSM). Extraction yield of papain was affected by concentration of $NaHSO_3$, extraction time and pH. Three independent factors were chosen to determine their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, which measures the linear, quadratic and interaction effects. According to the results of RSM, the stationary point for quantitatively dependent variable was found to be the maximum point for extraction yield. Optimum conditions of papain extraction were 4% of $NaHSO_3$, 120 min of extraction time and pH 7.6. Under these conditions, 793.16 mg of papain per g latex was extracted from papaya latex.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.2
• /
• pp.38-44
• /
• 2006

Two sulfur-based column reactors inoculated with a bacterial consortium containing autotrophic denitrifiers were operated for 100 and 500 days, respectively and nitrate removal efficiency and the adaptation of microbial communities in the columns were monitored with column depths and time. For better understanding the adaptation phenomenon, molecular techniques including 16S rDNA sequencing and DGGE analysis were employed. Although both columns showed about 99% of nitrate removal efficiency heterotrophic denitrifiers such as Cenibacterium arsenioxidans and Geothrix fermentans were found to a significant portion at the initial stage of the 100-day reactor operation. However, as operation time increased, an autotrophic denitrifier Thiobacillus denitrificans became a dominant bacterial species throughout the column. A similar trend was also observed in the 500-day column. In addition, nitrate removal efficiencies were different with column depths and thus bacterial species with different metabolic activities were found at the corresponding depths. Especially, T. denitrificans was successfully adapted and colonized at the bottom parts of the columns where most nitrate was reduced.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.51-61
• /
• 1997

The objective of this study is to evaluate the feasibility of Pumping-and-Treatment system (PTS) for remediation of the saturated zones contaminated with NAPLs. A simulation is carried out for the removal of DNAPLs (denser-than-water non-aqueous phase liquids) and LNAPLS (lighter-than-water non-aqueous phase liquids) distributing at and below the water table. In the study, LNAPL and DNAPL are assumed to be n-hexane and 1,1-dichloroacetone, respectively. The model system studied consists of four heterogeneous soil layers with different permeabilities. Groundwater flows through the bottom layer and a pumping well is located under the initial water table. The time-driven deformation of the water table and removal efficiency of contaminants are estimated after vacuum application to the inlet of the well. In the calculation, FVM (Finite Volumetric Method) with SIMPLEC algorithm is applied. Results show that removal efficiencies of both DNAPL and LNAPL are negligible for the first 5 days after the PTS operation. However, when the cone-shape water table is formed around the inlet of the pumping well, the rapid removal rate is obtained since NAPLs migrate rapidly through the curvature of the water table. The removal efficiency of DNAPL is estimated to be higher than that of LNAPL due to the gravity. The results also show that the fluctuation or cone-shaped depression of the water table enhances the removal efficiency of NAPLs in saturated zones. The simulation results could provide a basis of the PTS design for the removal of NAPLs in saturated zones.

• Journal of KIISE:Software and Applications
• /
• v.36 no.12
• /
• pp.967-976
• /
• 2009

In this paper, we propose an automatic lower extremity vessel extraction based on rigid registration and bone elimination techniques in CT and CT angiography images. First, automatic partitioning of the lower extremity based on the anatomy is proposed to consider the local movement of the bone. Second, rigid registration based on distance map is performed to estimate the movement of the bone between CT and CT angiography images. Third, bone elimination and vessel masking techniques are proposed to remove bones in CT angiography image and to prevent the vessel near to bone from eroding. Fourth, post-processing based on vessel tracking is proposed to reduce the effect of misalignment and noises like a cartilage. For the evaluation of our method, we performed the visual inspection, accuracy measures and processing time. For visual inspection, the results of applying general subtraction, registered subtraction and proposed method are compared using volume rendering and maximum intensity projection. For accuracy evaluation, intensity distributions of CT angiography image, subtraction based method and proposed method are analyzed. Experimental result shows that bones are accurately eliminated and vessels are robustly extracted without the loss of other structure. The total processing time of thirteen patient datasets was 40 seconds on average.

• Survey Research
• /
• v.9 no.2
• /
• pp.1-27
• /
• 2008

Problems of incomplete data are pervasive in statistical analysis. In particular, incomplete data have been an important challenge in repeated measures studies. The objective of this study is to give a brief introduction to missing data mechanisms and conventional/recent missing data methods and to assess the performance of various missing data methods under ignorable and non-ignorable missingness mechanisms. Given the inadequate attention to longitudinal studies with missing data, this study applied recent advances in missing data methods to repeated measures models and investigated the performance of various missing data methods, such as FIML (Full Information Maximum Likelihood Estimation) and MICE(Multivariate Imputation by Chained Equations), under MCAR, MAR, and MNAR mechanisms. Overall, the results showed that listwise deletion and mean imputation performed poorly compared to other recommended missing data procedures. The better performance of EM, FIML, and MICE was more noticeable under MAR compared to MCAR. With the non-ignorable missing data, this study showed that missing data methods did not perform well. In particular, this problem was noticeable in slope-related estimates. Therefore, this study suggests that if missing data are suspected to be non-ignorable, developmental research may underestimate true rates of change over the life course. This study also suggests that bias from non-ignorable missing data can be substantially reduced by considering rich information from variables related to missingness.