• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.170-176
• /
• 2008

Anti roll bar model for real time multibody vehicle dynamics model has been proposed using kinematic constraint. Anti roll bar have been modeled by kinematic relationship, and mass properties are neglected. Relative angle of torsion bar spring is computed by constraint about drop-link using Newton-Raphson iteration, and then the torque of torsion bar spring can be computed with the angle and torsion spring stiffness. Finally anti roll bar force acting on both knuckle can be calculated. To validate the proposed method, half car simulations of McPherson strut suspension and full car simulations are also carried out comparing with the ADAMS vehicle model with anti roll bar. CPU times are also measured to see the real-time capabilities of the proposed method.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.06a
• /
• pp.368-375
• /
• 2000

품사 태깅 시스템은 자연 언어 처리의 가장 기본이 되는 부분으로 상위 자연 언어 처리 분야인 구문분석, 의미분석의 전처리로 사용되거나, 기계번역, 정보검색이나 음성인식 및 합성등과 같은 많은 응용 시스템을 위해서도 필요하다. 이렇게 여러 가지 목적을 위해 품사 태깅 시스템은 존재하는데, 각각의 응용을 위해서 최적화된 태깅 시스템을 따로 구성하기도 하고, 하나의 태깅 시스템을 여러 가지 응용을 위해서 사용하기도 한다. 이때, 문제가 되는 것 중에 하나는 각 응용마다 요구하는 품사 태그 세트가 다르다는 것이다. 품사 태그세트가 고정되어 있다면 어떤 응용을 위해서는 사용되는 품사 태그세트가 너무 적어서 문제가 되고, 반대로 품사태그세트가 너무 많아서 시스템의 수행속도가 중요시되는 응용에서 성능저하의 요인이 되기도 한다. 본 논문에서는 하나의 태깅 시스템의 품사태그세트를 조절할 수 있도록 하여 몇 가지 응용시스템에 맞게 최적화 시킬 수 있는 방법론을 제시하고 실험을 통해서 시스템의 성능, 유지보수 및 시스템의 여러 리소스 관리 측면에서도 가장 효율적인 방법론임을 입증하고자 한다.

• Journal of Korea Water Resources Association
• /
• v.45 no.5
• /
• pp.455-464
• /
• 2012

In this study, a combined unsteady friction model has been developed to simulate the waterhammer phenomenon for the pipeline system. The method of characteristics has been employed as the modeling platform for the integration of the acceleration based model and the frequency dependant model for unsteady friction. Both Zielke's model and Ramos model were also compared with pressure measurements of a pilot plant pipeline system. In order to validate the modeling approach, a pipeline system equipped with the high frequency pressure data acquisition system was fabricated. The time series of pressure, introduced by a sudden valve closure, were obtained for two Reynolds numbers. A trial and error method was used to calibrate parameters for unsteady friction model. The comparison between different unsteady friction contributions in pressure variation provided the comprehensive understanding in the pressure damping mechanism of waterhammer. The proper evaluation of unsteady friction impact is a critical factor for accurate simulation of hydraulic transient.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.201-205
• /
• 2020

The structural texture is defined as a form which a texel is regularly repeated in the texture. Structural texture analysis/recognition has various industrial applications, such as automatic inspection of textiles, automatic testing of metal surfaces, and automatic analysis of micro images. In this paper, we propose a Convolution Neural Network (CNN) based system for structural texture analysis. The proposed method learns texles, which are components of textures to be classified. Then, this trained CNN recognizes a structural texture using a partial image obtained from input texture. The experiment shows the superiority of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1193-1200
• /
• 2005

In this paper, we proposed an image hiding method which decreases the amount of calculation encrypting partial data rather than the whole image data using a discrete wavelet transform and a linear scalar quantization which have been adopted as the main technique in JPEG2000 standard and then implemented the proposed algorithm to hardware. A chaotic system was used instead of encryption algorithms to reduce further amount of calculation. It uses a method of random changing method using the chaotic system of the data in a selected subband. For ciphering the quantization index it uses a novel image encryption algorithm of cyclical shifting to the right or left direction and encrypts two quantization assignment method (Top-down coding and Reflection coding), made change of data less. The experiments have been performed with the proposed methods implemented in software for about 500 images. The hardware encryption system was synthesized to find the gate-level circuit with the Samsung $0.35{\mu}m$ Phantom-cell library and timing simulation was performed, which resulted in the stable operation in the frequency above 100MHz.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.239-240
• /
• 2020

마스크 쓴 얼굴에 대해 랜드마크 분석을 진행하기 위해서는 대량의 마스크가 착용된 얼굴 데이터셋이 필요하다. 본 논문에서는 공개된 얼굴 데이터셋에 자동으로 마스크를 합성하여 대량의 마스크를 착용한 얼굴 데이터셋을 생성하는 시스템을 제안한다. 마스크는 얼굴의 많은 부분을 가리는 물체이다. 따라서 마스크를 쓴 얼굴에 대해서는 일반적인 얼굴 데이터셋으로 학습된 landmark detector가 잘 작동하지 않는다. landmark detector가 잘 작동하게 하려면 마스크를 쓴 얼굴에 대해서 학습을 시켜야 한다. 그러나 현재 마스크를 쓴 얼굴 이미지와 풍부한 landmark 정보를 함께 가지고 있는 데이터셋이 존재하지 않기 때문에 학습에 어려움이 있다. 이 문제를 해결하기 위해 마스크 얼굴 이미지 데이터셋을 만들어내는 방법을 제안하고 마스크를 착용한 얼굴에도 잘 작동하는 랜드마크 검출기를 학습시켜 그 효용을 입증하였다.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.115-122
• /
• 2004

Software system modeling has a goal for finding and solving system's problems by describing and analyzing system model in formal notations. Petri nets, as graphical formalism, have been used in describing and analyzing the software systems such as parallel systems, real-time system, and protocols. In the analysis of Petri nets, general system properties such as deadlock and liveness are analyzed by the reachability analysis. On the other side, specific properties such as functional requirements and constraints are checked by model-checking. However, since these analysis methods are based on enumeration of ail possible states, there nay be state explosion problem, which means that system states exponentially increase as the size of system is larger. In this paper, we propose a new method for mechanically checking system properties with avoiding state explosion problem. At first, system properties are described in property nets then the system model and the property net are composed and analyzed. In the compositional analysis, system parts irrelevant to the specific property are reduced to minimize the analysis domain of the system. And it is possible to mechanically check whether a specific property is satisfied or not.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.849-852
• /
• 2000

본 논문에서는 RSA 암호 시스템의 Montgomery 모듈러 곱셈 알고리듬을 개선한 고속 모듈러 곱셈 알고리듬을 제안하고, Hybrid 구조의 가산기를 사용한 고속 모듈러 곱셈 알고리듬의 설계에 관하여 기술한다. 기존 Montgomery 알고리듬에서는 부분합계산시 2번의 덧셈연산이 요구되지만 제안된 방법에서는 단지 1번의 덧셈 연산으로 부분 합을 계산할 수 있다. 또한 덧셈 연산 속도를 향상시키기 위하여 Hybrid 구조의 가산기를 제안한다. Hybrid 가산기는 기존의 CLA(Carry Look-ahad Adder)와 CSA(Carry Select Adder)알고리듬을 혼합한 구조를 기본으로 하고 있다. 제안된 고속 모듈러 곰셈기는 VHDL(VHSIC Hardware Description Language)을 이용하여 모델링하였고, $Synopsys^{TM}$사의 Design Analyzer를 이용하여 논리합성(Altera 10K lib. 이용)을 수행하였다. 성능 분석을 위하여 Altera MAX+ PLUS II 상에서 타이밍 시뮬레이션을 수행하였고, 실험을 통하여 제안한 방법의 효율성을 입증하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.3
• /
• pp.21-27
• /
• 1999

This paper introduces the research and development of automatic generation technology to develop the character agent. The R&D of this technology includes three major elements-body model generation, automatic motion generation and synthetic human generation. Main areas of application would by cyber space- 3D game, animation, virtual shopping, on line chatting, virtual education system, simulation and security system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.55-64
• /
• 2001

Industrial machines are sometimes exposed to the danger of earthquake. In the design of a mechanical system, this factor should be accounted for from the viewpoint of reliability to analyze a complex nonlinear structure system under random excitation is proposed. First, the actual random excitation, such as earthquake, is approximated to the corresponding Gaussian process for the statistical analysis. The modal equations of overall system are expanded sequentially. Then, the perturbed equations are synthesized into the overall system and solved in probabilistic way. Several statistical properties of a random process that are of interest in random vibration are evaluated in each substructure. Comparing with the results of the numerical simulation proved the efficiency of the proposed method.