• 제목/요약/키워드: 부분부하 성능

검색결과 174건 처리시간 0.03초

흡입 밸브 각도에 따른 엔진 부분부하 성능 특성 (Part Load Performance Characteristics according to Inlet Valve Angle)

  • 이정만;이재원;김형식;권순태;박찬준;엄인용
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 2008년도 춘계학술 발표회
    • /
    • pp.161-166
    • /
    • 2008
  • 본 논문에서는 가솔린 기관에서 흡입 밸브 각도가 엔진의 부분부하 성능에 어떠한 영향을 미치는지를 혼합비 반응 특성을 통해 알아보았다. 흡입 밸브각이 작은 엔진이 흡입 밸브 각이 큰 엔진에 비해 배기가스 중 질소산화물 (BSNOx)의 양은 줄어들었고, 점화시기는 지각되었고, 제동연료소비율은 조금 개선되었다. 배기가스 중 질소산화물의 양이 줄고 점화시기가 지각 되었다는 것은 급속 연소가 일어났다고 판단할 수 있다. 시험 결과를 살펴보면 흡입 밸브각이 작아지면 기관의 연소 성능이 좋아지는 것으로 판단 될 수 있다.

  • PDF

가스터빈의 설계 성능과 부분부하 성능 사이의 상관관계 분석 (Analysis of Relationship Between Design and Part Load Performance of Gas Turbines)

  • 김동섭
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1164-1171
    • /
    • 2002
  • This study analyzed the dependence of part load performance of simple cycle gas turbines on their design performance. Various parametric calculations were carried out to examine effects of design temperature ratio, pressure ratio and component efficiencies using a simplified analysis. In addition, a more practical analysis was done for realistic design conditions with the aid of a comprehensive performance analysis program. The results show that gas turbines with higher design performance exhibit less efficiency degradation during part load operation. The influence of power control method (fuel only centre) and air flow control) on part load performance was examined as well.

지열원 멀티열펌프 시스템의 용량가변 특성 연구 (Capacity Modulation of a Ground Source Multi-Heat Pump in the Part Load Condtions)

  • 조찬용;오명석;최종민
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.120-120
    • /
    • 2010
  • 에너지 절약적 차원에서 한 대의 실외기에 다수의 실내기가 접속되는 개별공조형 멀티 열펌프에 관한 연구 및 개발과 보급이 증대되고 있다. 본 연구에서는 복수의 실내기를 갖고 가변속 압축기를 채용한 지열원 물대공기 멀티열펌프시스템을 학교 현장에 설치하여 제조사의 운전 제어 알고리즘에 따라 일일 냉난방 실증 성능 특성을 분석하였다. 2008년 9월 30일의 냉방부하가 낮은 일자에 대하여 시간에 따른 부하 변동에 따라 압축기의 용량가변으로 실내기 냉방용량은 정격용량 대비 17.1%에서 111.3%의 범위에서 변이되었으나, 열펌프 유닛의 일일 최대 COP는 6.2를 나타냈으며, 일일 평균 열펌프 유닛 COP는 4.5로 열펌프 유닛 인증 기준 이상의 성능을 나타냈다. 2008년 11월 10일 대비 2008년 12월 15일에는 시스템 가동 중의 평균 외기온도가 $9.6^{\circ}C$ 감소하였으나, 각 재실공간의 용도별 부분 부하특성으로 11월 10일 보다 난방 부하량이 작게 나타났다. 하지만, 12월 15일에는 부하량이 매우 작아서 11월 10일보다 잦은 압축기 가변에 따른 손실로 일일 평균 COP가 낮게 나타났다. 2009년 1월 12일에는 정격 용량대비 94%의 부하율로 11월 10일과 12월 15일 대비 4배 이상의 부하량으로 압축기 용량 가변율이 작아서 난방용량과 COP 변화율이 작게 나타났다. 2009년 1월 12일에는 지중순환수의 실외열교환기 유입온도가 2008년 12월 15일보다 감소하고, 시스템의 난방용량 증가로 상대적으로 응축기와 증발기 크기가 감소한 효과로 히트펌프 유닛 COP가 감소하였으나, 본 지열원 열펌프 제조사에서 생산하고 있는 본 지열원 시스템과 동일한 압축기 등을 채용한 동일 용량의 공기열원 열펌프의 1월 12일 외기온도 $-10^{\circ}C$에서의 열펌프 유닛 COP 대비 70% 우수한 성능을 나타냈다. 본 지열원 히트펌프의 2008년 11월 10일의 일일 평균 히트펌프 유닛 COP는 외기온도가 낮고 일일 부하량이 크게 나타난 1월 12일의 일일 평균 히트펌프 유닛 COP 대비 37% 높게 나타났으나, 지중순환펌프의 정속운전으로 시스템 요구 지중순환수 유량 증가에 따른 성능 향상보다 소비전력 증가 영향이 커서 1월 12일의 시스템 COP 보다 33.3% 작은 값을 나타냈다. 본 연구의 용량 가변형 압축기를 채용한 지열원 멀티 히트펌프 유닛을 지열원 냉난방 시스템의 히트펌프 유닛으로 사용할 경우 시스템 최적화를 통한 시스템 COP 향상과 연간에너지 절감을 이루기 위해서는 히트펌프의 용량 변화 시에 지중순환펌프의 순환 유량 최적화를 위한 효율적 운전 제어 알고리즘 개발이 요구된다.

  • PDF

부하추종 운전방법에 따른 고체산화물 연료전지/가스터빈 하이브리드 동력 시스템의 부분부하 성능특성 (Part-load Performance Characteristics of a Solid Oxide Fuel Cell/Gas Turbine Hybrid Power System Operating with Various Load-following Operation Modes)

  • 김재훈;양진식;노승탁;손정락
    • 대한기계학회논문집B
    • /
    • 제30권3호
    • /
    • pp.193-200
    • /
    • 2006
  • The purpose of this study is to compare the part-load performance of a SOFC/GT hybrid power system with three different kinds of load-following operation modes. The primary mode for the part load operation of a hybrid power system is the reduction of supplied fuel (e.g., fuel control mode) to the hybrid system. The other two options, i.e., variable speed and VIGV controls, are related to the reduction of supplied air simultaneously with the reduction of supplied fuel to the system. With the performance analysis of a SOFC/GT hybrid power system, it is concluded that the variable speed con佐ol mode Provides the best performance for the part-load operations. It is also found that the VIGV control mode, with its better performance behavior than the fuel control mode, can be used as an important option for the part-load operation especially in case that the variable speed control mode can not be adopted.

로그구조 디스크 서버에서 부분 세그먼트의 영향 (Partial Segement Effects on the Log-structured Disk Server)

  • 김대웅;남영진;박찬익
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
    • /
    • pp.721-723
    • /
    • 1998
  • 본 논문에서는 기존의 로그구조 디스크 서버(Log-structured Disk Server ; LDS)상에서 부분 세그먼트에 의한 디스크 대역폭 이용률 저하 및 높은 공간 정리 부하(cleaning overhead)량과 같은 문제점을 제기하고, 이러한 부분 세그먼트를 제거하기 위한 방법의 하나로 비휘발성 메모리를 사용한 LDS를 제안한다. 이 새로운 LDS를 Solaris운영체제 상에서 구현하였으며, 다양한 실험을 통하여 제안된 구조가 디스크 대역폭 이용률 및 공간 정리 부하 측면에서 기존의 구조에 비해서 월등히 좋은 성능을 보임을 볼 수 있었다.

  • PDF

합성가스를 연료로 사용하는 고체산화물연료전지-가스터빈 하이브리드 시스템의 탈설계점 성능 특성 (Off-design Performance Characteristics of SOFC-GT Hybrid System Operating with Syngas Fuel)

  • 최정일;손정락;송성진;김동섭
    • 대한기계학회논문집B
    • /
    • 제34권3호
    • /
    • pp.269-274
    • /
    • 2010
  • 가스화기를 장착한 고체산화물연료전지와 가스터빈의 하이브리드 시스템의 사전 연구로서 합성가스에서 수소와 일산화탄소의 구성이 하이브리드 시스템의 성능특성에 미치는 영향을 조사하였다. 이때 다른 구성요소와 다른 발열량을 가진 연료의 특성이 가스터빈의 탈설계점 운전을 유발하여 결과적으로 전체 하이브리드 시스템의 다른 성능 특성을 야기할 것으로 예상된다. 합성가스의 구성요소가 고체산화물연료전지의 성능에 영향을 준다는 것과 일산화탄소를 사용하는 하이브리드 시스템의 성능이 수소를 사용하는 것보다 나쁘다는 것이 발견되었다. 부분부하 성능에서는 수소를 사용하는 경우 부분부하 운전시에 성능 저하가 일산화탄소의 경우보다 더 현저하였다.

엔진 부분 부하 성능 및 변속기 시프트맵을 이용한 차량주행성능 컴퓨터 시뮬레이션 (A Computer Simulation of a Driving Vehicle Performance using an Set of Engine Part Load Performance and a Transmission Shift Map)

  • 이충훈
    • 한국분무공학회지
    • /
    • 제19권2호
    • /
    • pp.64-68
    • /
    • 2014
  • A driving vehicle performance which is driven by FTP-75 mode was simulated by computer. Throttle valve position, engine speed, air mass flow rate, fuel consumption et al. were computer simulated. A set of engine part load performance data, automatic transmission shift map and vehicle specifications were used for the computer simulation. Throttle valve position, engine speed, air mass flow rate et al. measured for evaluating the computer simulation results by driving the vehicle with FTP-75 mode on a chassis dynamometer. GT-Power$^{(R)}$ software was used for the computer simulation of the driving vehicle performance. Experimental fuel consumption rate was measured by using an ECU HILS fuel injection system. The experimental data and simulation results were compared. The computer simulation of the driving vehicle performance predicts the measured data well comparatively.

웹 클러스터 시스템의 효율적인 동적 작업분배 (An Efficient Dynamic Load Distribution for the Web Cluster Systems)

  • 서경룡
    • 한국멀티미디어학회논문지
    • /
    • 제7권8호
    • /
    • pp.1097-1106
    • /
    • 2004
  • 전형적인 웹 클러스터 시스템은 여러 대의 실제서버와 클라이언트에 작업을 분배하는 가상서버로 구성된다. 본 논문에서는 고 가용성 웹 클러스터를 구성하기 위한 부하예측방식을 사용한 동적 작업 분배 방식을 제안하였다. 가상서버는 적절한 주기로 상태요청 메시지를 실제서버에 전송하여 부하 상태를 알아낸다. 하지만 작업분배 과정에서 실제의 부하상태의 변화를 정확히 알 수 없으므로 클라이언트의 요청에 대하여 실제서버의 부하상태를 예측하여 최소 부하상태 인 서버에 작업을 할당한다. 제안된 작업 분배방식은 실제서버의 부분적 고장과 무관하게 동작하며 부분적인 고장이 발생하여도 전체 시스템에 영향을 주지 않고 계속적인 서비스를 제공한다. 또한 다양한 성능평가를 수행하여 실제서버 확장에 따른 성능확장능력과 작업처리능력이 향상되었음을 보였다.

  • PDF

단축가스터빈의 설계점 및 부분부하 성능해석 프로그램 개발 (Program Development for Design and Part Load Performance Analysis of Single-Shaft Gas Turbines)

  • 김동섭;노승탁
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2409-2420
    • /
    • 1996
  • This paper describes the development of a general program for the design and part load performance analysis of single-shaft-heavy-duty gas turbines. Efforts are made to fully represent the real component features by the characteristic models and special emphasis is put on the modeling of cooled turbine stages. The design analysis routine is applied to simulate the performance of current gas turbines and its appropriateness for system analysis is validated. Meanwhile, the component parameters of real engines which describe the technology level are obtained. The program is extended to predicting the part load operation of gas turbines with the aid of models for the off-design characteristics of compressor, turbine and other main components. Part load simulation can be carried out only with limited numbers of input data. It is demonstrated that the program accurately estimates the part load characteristics of real turbines.