• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

With the substantial increase of the size of structure, the management of excavation becomes more difficult. Therefore, massive collapses which are related to retaining wall recently increase. However, since the study on measuring and monitoring the pre-stressing force of anchor is insufficient, behavior of anchor may not be predicted and monitored appropriately by the existing strain gauge and load cell type monitoring system. FBG Sensor, which is smaller than strain gauge and has better durability and does not have a noise from electromagnetic waves, is adapted to measure the strain and pre-stressing force of 7-wire strand, so called smart tendon. A series of pullout tests were performed to verify the feasibility of smart tendon and find out the load transfer mechanism around the steel wire tendon fixed to rock with grout. Distribution of measured strains and estimated shear stresses are compared with those predicted by theoretical solutions. It was found that developed smart tendon can be used effectively for measuring strain of 7-wire strand anchor and theoretical solutions underestimate the magnitude of shear stress and load transfer depth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.9-20
• /
• 2019

The number of natural disasters in Korea, such as earthquakes, is increasing. As a result, there is growing need for temporary residences or shelters for disaster conditions. The aim of this study was to produce post-disaster refugees housing differentiated from existing shelters using lightweight composite panels. To accomplish this, the structural performance of lightweight composite panels was validated, and an in-plane shear strength test was conducted according to the ASTM E72 criteria among the performance test methods for panels. As a result of the experiment, the maximum load for each specimen under an in-plane shear load was determined. All the experiments ended with the tear of the panel's skin section. The initial stiffness of the specimens was consistent with that predicted by the calculations. On the other hand, local crushing and tearing, as well as the characteristics of the panel, resulted in a decrease in stiffness and final failure. Specimens with an opening showed a difference in stiffness and strength from the basic experiment. The maximum load and the effective area were found to be proportional. Through this process, the allowable shear stress of the specimens was calculated and the average allowable shear stress was determined. The average ultimate shear stress of the lightweight composite panels was found to be $0.047N/mm^2$, which provides a criterion of judgement that could be used to expect the allowable load of lightweight composite panels.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.300-308
• /
• 2021

The epidemic of COVID19 caused a big change in design collaboration, which has been conducting using face-to-face interaction. Designers actively used video conferencing and online document tools in situations where face-to-face meetings were difficult, and this gave them an opportunity to experience that non-face-to-face collaboration can be more effective in a specific design process. In this regard, this study attempted to find out which activities during the design process are more compelling in face-to-face collaboration or non-face-to-face collaboration. To do this, three user experience design projects conducted after the COVID19 epidemic were analyzed through a retrospective interview method. As a result, during four design stages, 'Discover, Define, Develop, Deliver', face-to-face collaboration is necessary for the areas that require creative problem solving through active interaction. In contrast, non-face-to-face collaboration is preferred and more effective when designers need their own space and proceed their design work. In addition, the aspects of design tools supporting non-face-to-face collaboration were also illustrated. Findings discovered through this study are expected to contribute to research on the design process later.

• Tunnel and Underground Space
• /
• v.32 no.1
• /
• pp.78-92
• /
• 2022

In this study, we proposed a diagnostics and assessment model for mining sites that can evaluate the smart mining technology level in a systematic and structured way. For this, the maturity of the smart mining was defined, and detailed assessment items of the diagnostics and assessment model for smart mining were derived by considering the smart factory diagnostics and assessment model (KS X 9001-3) used in the manufacturing industry. While maintaining the existing system, the existing 46 detailed assessment items were modified to be suitable for mining. As a result, a total of 29 detailed assessment items were derived in the areas of promotion strategy, process, information system and automation, and performance. Based on this, a questionnaire was designed to diagnose the level of smart mining technology, and assessment was performed by applying it to domestic iron mines. The level of smart mining technology in the study area was found to be level 2, and it could be inferred that it was about 40% lower than the average smart level of the general manufacturing industry. In addition, by using the developed model, it was possible to recognize the weak points of the mine at each stage of the introduction, operation, and advancement of smart mining, and to suggest investment and improvement directions.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.195-212
• /
• 2022

Based on the kinetic typography principle and the structure features of Chinese characters, this study took the Chinese'24 solar terms' theme dynamic poster as the research object, explored the visual expression of dynamic Chinese characters, and tried to summarize the visual expression law of Chinese characters in dynamic poster design. It can be found that, there could be 6 different types of Chinese character expressions in the 24 solar terms poster design. Among them, 'Drawing' design method has the meaning of text structure and form expression, and 'Assembling' design method has the meaning of text stroke and texture association, also, 'Forming' design method bring its meaning through stroke deformation, 'Transforming' design method conveys the content through text disintegration, 'Replacing' design method mainly bring the meaning through simulation, while 'Rotation' design method always express through visual three-dimensional and space. Finally, the findings could not only provide analytical logic and methods for the expression of Chinese characters in dynamic poster design, but also fill the lack of formative research on dynamic Chinese characters, which hopefully provide basic information for the research related to dynamic Chinese character structure, as well as the dynamic poster designers.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.5-12
• /
• 2009

As rock bolts become one of the main support systems in tunnels and underground structures, the integrity of the rock bolts affects the safety of these structures. The purpose of this study is the evaluation of rock bolt integrity using wavelet transforms of the guided ultrasonic waves by using transmission test in the field. After several rock bolts with various defect ratios are embedded into a large scale concrete block and rock mass, guided waves are generated by a piezo disk element and measured by an acoustic emission (AE) sensor. The captured signals are analyzed in the time-frequency domain using the wavelet transform based on a Gabor wavelet. Peak values in the time-frequency domain represent the interval of travel time of each echo. The energy velocities of the guided waves increase with an increase in the defect ratio. The suitable curing time for the evergy velocity analysis is proposed by the laboratory test, and in-situ tests are performed in two tunnelling sites to verify the applicability of rock bolt integrity tests performed after proposed curing time. This study proves that time-frequency domain analysis is an effective tool for the evaluation of the rock bolt integrity.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.81-93
• /
• 2022

The purpose of this study is to understand the meaning of clinical practice experience, including web-based simulation practice, in the context of the corona pandemic era. As for the research method, data were collected through a focus group interview on the experience of web-based simulation practice and subsequent clinical practice and analyzed by content analysis method. The contents of the two interview groups were analyzed, and the results were divided into 2 components, 7 topic groups, and 18 topics. The first component, the clinical practice, was divided into four topic groups: 'The anxious start of practice in a pandemic situation', 'Direct experience through various cases', 'Training opportunities to prepare as a future nurse', and 'The burden of performance and limited experience'. The second component, the web-based simulation practice, was divided into three topic groups: 'Unfinished nursing practice', 'Indirect experience of clinical nursing in virtual space', and 'Requirement of an integrated practice model'. Clinical practice is a very important part of the nursing education curriculum. However, the nursing that students can perform in the field is very limited. Therefore, to supplement the shortcomings of observation-oriented clinical practice and to increase the quality of practical education, it is necessary to consider a hybrid education model including web-based simulation practice.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.139-147
• /
• 2023

As heavy precipitation rates have increased due to climate change, the risk of landslides has also become greater. Studies in the field of disaster risk assessment predominantly focus on evaluating intrinsic importance represented by the use or role of facilities. This work, however, focused on evaluating risks according to the external conditions of facilities, which were presented via debris flow simulation. A random walk model (RWM) was partially improved and used for the debris flow simulation. The existing RWM algorithm contained the problem of the simulation results being overly concentrated on the maximum slope line. To improve the model, the center cell height was adjusted and the inertia application method was modified. Facility information was collected from a digital topographic map layer. The risk level of each object was evaluated by combining the simulation result and the digital topographic map layer. A risk assessment technique suitable for the polygon and polyline layers was applied, respectively. Finally, by combining the evaluated risk with the attribute table of the layer, a system was prepared that could create a list of objects expected to be damaged, derive various statistics, and express the risk of each facility on a map. In short, we used an easy-to-understand simulation algorithm and proposed a technique to express detailed risk information on a map. This work will aid in the user-friendly development of a debris flow risk assessment system.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1905-1919
• /
• 2000

The main motivation of this research is to develop an intelligent control strategy for Activated Sludge Process (ASP). ASP is a complex and nonlinear dynamic system because of the characteristic of wastewater, the change in influent flow rate, weather conditions, and etc. The mathematical model of ASP also includes uncertainties which are ignored or not considered by process engineer or controller designer. The ASP is generally controlled by a PID controller that consists of fixed proportional, integral, and derivative gain values. The PID gains are adjusted by the expert who has much experience in the ASP. The ASP model based on $Matlab^{(R)}5.3/Simulink^{(R)}3.0$ is developed in this paper. The performance of the model is tested by IWA(International Water Association) and COST(European Cooperation in the field of Scientific and Technical Research) data that include steady-state results during 14 days. The advantage of the developed model is that the user can easily modify or change the controller by the help of the graphical user interface. The ASP model as a typical nonlinear system can be used to simulate and test the proposed controller for an educational purpose. Various control methods are applied to the ASP model and the control results are compared to apply the proposed intelligent control strategy to a real ASP. Three control methods are designed and tested: conventional PID controller, fuzzy logic control approach to modify setpoints, and fuzzy-PID control method. The proposed setpoints changer based on the fuzzy logic shows a better performance and robustness under disturbances. The objective function can be defined and included in the proposed control strategy to improve the effluent water quality and to reduce the operating cost in a real ASP.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.4
• /
• pp.1-7
• /
• 2000

Traditionally, three dimension model s have been used for building virtual worlds, and a data structure called the "scene graph" is often employed to organize these 3D objects in the virtual space. On the other hand, image-based rendering has recently been suggested as a probable alternative VR platform for its photo-realism, however, due to limited interactivity. it has only been used for simple navigation systems. To combine the merits of these two approaches to object/scene representations, this paper proposes for a scene graph structure in which both 3D models and various image-based scenes/objects can be defined. traversed, and rendered together. In fact, as suggested by Shade et al. [1]. these different representations can be used as different LOD's for a given object. For in stance, an object might be rendered using a 3D model at close range, a billboard at an intermediate range. and as part of an environment map at far range. The ultimate objective of this mixed platform is to breath more interactivity into the image based rendered VE's by employing 3D models as well. There are several technical challenges in devising such a platform : designing scene graph nodes for various types of image based techniques, establishing criteria for LOD/representation selection. handling their transition s. implementing appropriate interaction schemes. and correctly rendering the overall scene. Currently, we have extended the scene graph structure of the Sense8's WorldToolKit. to accommodate new node types for environment maps. billboards, moving textures and sprites, "Tour-into-the-Picture" structure, and view interpolated objects. As for choosing the right LOD level, the usual viewing distance and image space criteria are used, however, the switching between the image and 3D model occurs at a distance from the user where the user starts to perceive the object's internal depth. Also. during interaction, regardless of the viewing distance. a 3D representation would be used, if it exists. Finally. we carried out experiments to verify the theoretical derivation of the switching rule and obtained positive results.