• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.185-190
• /
• 2017

Fractal patterns are visible regularities of form found in the natural world. The mathematics of fractals can explain spiral growth patterns of self-similarity in organisms. For example, ammonites have complex but regular patterns of suture lines, resulting in a fractal-like display. In this study, a small region (less than 1mm diameter) of the spiral center of a rarely well preserved ammonite (Eogaudryceras sp.) was examined under microscope. Interestingly, we found a differential change of suture shapes at early stages of animal development providing a model for the study of Evo-devo (evoutionary developmental biology). Evo-devo is a convergence science born out of the recognition of complexity from interactions between generative and adaptive forces.

• Journal of Chest Surgery
• /
• v.36 no.12
• /
• pp.904-910
• /
• 2003

Thoracoscopic bullectomy (VATS-B) is now the preferred treatment for spontaneous pneumothorax despite of higher recurrence rate than open thoracotomy. Several methods have been used to prevent this problem. The effectiveness of staple line reinforcement (SLR) in VATA-B using endostaplers was assessed by clinical and experimental study. Meterial and Method: In experimental study, canine lungs were harvested immediately (group I N=5) and 48 hours (group II N=5) after stapling. The pressures at which initial air leaks occurred were measured. In clinical study from February 1997 to March 1999, 106 procedures in 104 patients undergoing VATS-B for spontaneous pneumothorax were classified into two groups according to the presence of SLR and were compared. Result: The average pressure of the initial air leakage was significantly higher in SLR than that of staples alone (18$\pm$1.6 vs 48$\pm$3 mm Hg in group I; 23.8$\pm$1.9 vs 54$\pm$4.6 mm Hg in group II, p<0.001). In the clinical data, there were significant differences seen in the duration of drainage, the total length of endostaplers used, and the duration of the postoperative hospital stay between patients with staple alone and patients with SLR (4.4$\pm$1.4 vs 3.1$\pm$1.1 days in duration of drainage, 92.3$\pm$28.1 vs 71.1$\pm$30.6 mm in total length of endostaplers used, 5.9$\pm$1.9 vs 4.6$\pm$1.7 days in postoperative hospital stays, p<0.001). Conclusion: SLR was effective for preventing prolonged air leakage and responsible for shorter hospital stays after VATS-B for the treatment of spontaneous pneumothorax.

• Korean Journal of Cleft Lip And Palate
• /
• v.7 no.2
• /
• pp.93-106
• /
• 2004

본 연구의 목적은 편측성 구순구개열 (UCLP) 환자에서 술전 비치조 정형장치 (presurgical nasoalveolar molding appliance, PNAM) 와 구순 봉합수술의 치조골 정형효과를 3차원 (3-D) 분석을 통하여 평가하는 것이다. 연구대상은 16명의 UCLP 환자 (평균 파열부거리: 10.46mm) 이며 PNAM 장치에 의한 치료와 rotation-advancement법에 의한 구순 봉합수술을 받았다 처음 내원시 (평균연령: $37.0{\pm}27.89$ 일), PNAM 치료를 받고 난 후이며 구순봉합수술 1달 전 (평균연령: $119.25{\pm}40.18$ 일), 구순봉합수술 2달 후 (평균연령: $190.81{\pm}42.78$ 일)에 상악의 인상을 채득하였다. 그 후 laser scanning machine (Orapix, Dimennex, Seoul, Korea) 과 3-D view software (3Dxer, Dimennex) 를 사용하여 3-D모형을 제작하였다. 선, 각도, 정중선변이, 거리, 면적 항목을 3-D 모형상에서 계측하고, 각 시기별의 차이를 비교하기 위하여 Wilcoxon signed rank test를 사용하여 분석하였다. PNAM치료 동안과 구순 봉합수술 후에도 치조골 후방부는 안정된 구조물이었다. PNAM치료에 의한 파열부 거리의 감소는 대분절 (greater segment) 의 내측 굴곡 (bending) 에 의하여 발생하였다. 대분절 (greater segment)의 전방 성장은 PNAM치료에 의하여 억제되었으나, 구순 봉합수술 후에 회복되었다. 구순 봉합수술 후에 대분절과 소분절 사이의 전방부 각도의 증가는 구순 반흔 (lip scar) 의 압력에 의한 치조골 정형 효과 때문으로 생각된다. 정중선변이는 PNAM치료에 의하여 개선되었다. PNAM치료 동안과 구순 봉합수술 후에 구개부 (palatal segment) 의 면적은 계속 증가하였다. 치조골 면적과 거리 항목의 증가는 후방부에서 크게 나타났다. 이러한 결과는 PNAM치료에 의한 치조골 정형효과는 주로 전방부에서 발생하며, 치조골의 성장은 구순 봉합수술 후에 후방부에서 주로 발생한다는 것을 의미한다.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.109-117
• /
• 1982

The author has observed the gross reactions of surrounding maxillary sutures to the widening of midpalatal suture in comparison of young dog with adult dog. Experimental animals used was two young dog and two adult dog with normal palate. After midpalatal suture was seperated with rapid palatal expansion device, experimental animals were sacrificed to observe the surrounding maxillary sutures. The following results were obtained. 1. In adult dog, nasoincisive suture was not expanded, while in young dog it was expanded. 2. In adult dog, pterygopalatine suture was hardly expanded, while in young dog it was expanded definitely. 3. In adult dog, frontomaxillary suture was not expanded, while in young dog it was expanded unilaterally. 4. In adult dog, palatoethmoidal suture was not expanded, while in young dog it was expanded unilateraily.

• Korean Journal of Ichthyology
• /
• v.9 no.1
• /
• pp.114-120
• /
• 1997

Frequencies and the types of abnormal vertebrae in the juvenile of five cyprinid fishes collected from the Kumho River during 1995 and 1996 were examined. Types of vertebral anomalies in investigated species were spinal curvature, fused vertebrae, helical sutures of cetera and abnormal vertebrae with one or two additional spines. The frequencies and the types of vertebral anomalies were different among the species. Of all the examined species, the type with one or two additional spines showed the highest frequencies, 11.72~12.11%. The frequencies of fused vertebrae was 4.45~7.68%. Thes two types of vertebral anomalies were observed in all species. Among the several types of fused vertebrae, the frequencies of double fused vertebrae were higher than those of other types. Also, the incidence of fused vertebrae located in the caudal region of vertebral column was much higher than that in other regions. The percentages of spinal curvature and helical sutures of vertebrae in the investigated species were 0.02~0.15% and 0.02%, respectively. Among the examined specimens, vertebral anomalies include fused vertebrae and one or two additional spines were shown in the three species, Korean slender gudgeon (Squalidus gracilis majimae), False dace (Pseudorasbora parva) and Crucian carp (Carassius auratus). In addition to the two vertebral anomalies, spinal curvature was shown in the Korean gudgeon (Squalidus chankaensis tsuchigae). Dark chub (Zacco temmincki) had fused vertebrae, one or two additional spines, spinal curvature, and helical sutures of vertebrae. This species has the most variable vertebral anomalies. Frequencies of fused vertebrae and one or two additional spines in the all tested fishes were not related with their standard lengths measured. However, spinal curvature and helical sutures of vertebrae were shown only in the specimens smaller than 20mm in standard length.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.664-668
• /
• 1999

Mucocele is clinical term used to describe swelling caused by the pooling of saliva at the site of a severed or obstructed minor salivary gland duct. Mucoceles are categorized into two subgroups, extravasation type and retention cyst type. The etiology of extravasation type mucocele is related to mechanical trauma to the minor salivary gland excretory duct, resulting in extravasation of mucus into the fibrous connective tissue so that a cyst-like cavity is produced, but the epithelial lining is absent. Retention cyst type mucocele results from obstruction of minor salivary gland excretory duct, and cystic cavity is lined by epithelial cells. This case report presents a mucocele occurred on the lower lip, and caused by suture silk unremoved for 3 years. Suture silk penetrated and tore the minor salivary gland duct on the lower lip with subsequent extravasation of mucus into the fibrous connective tissue.

• Journal of Korean Society of Forest Science
• /
• v.96 no.4
• /
• pp.455-461
• /
• 2007

This research was processed on morphological and physical characteristics of 'Yongdong' cultivar nuts. (1)Morphological properties of 'Yongdong' cultivar nuts were significantly different from the control, native species, in respect of all properties. (2) 'Yongdong' cultivar nuts showed higher figures than the native species on 9 items of morphological properties (kernel weight, size, length and width of pad on suture and etc.), whereas other 6 items (height of pad on suture, thickness of shell and septem, fragment numbers of isolated kernel, roundness index, and etc.) showed lower figures than those of the control. (3) In physical properties of the nut shells, 'Yongdong' cultivar was superior to the control at all items with the exception of compressive prove distance. Accordingly, it was also verified as effective cultivar of shelled walnut with suture line direction applied the minimum strength. (4) 'Yongdong' cultivar, 21.9 kg, was approximately twice lower than the control, 42.6 kg, on maximum compressive weight. It was demonstrated that the 'Yongdong' cultivar characterized by easily crushing shell by small strength was great in cracking properties. (5) On the study of yield strength, the native species being twice higher than 'Yongdong' cultivar showed the properties of the small elasticity and the shell hardness. While, the suture line of 'Yongdong' cultivar having the lowest yield strength 15.6 kg and 16.0 kg was identified the shell crushed easily. (6) The movement distance of the compressive prove of 'Yongdong' cultivar, 4.2 mm, was longer than that of the control, 2.7 mm. Subsequently, it means that the amount of loss possibly occurring to distribution process was not great, whereby productive value was high. (7) The compressive strength of the suture line of 'Yongdong' cultivar, $9.1kg/cm^2$, was much lower than total average of that $12.4kg/cm^2$. It was also statistically different with other properties. (8)The hardness examination by the compressive position revealed that the suture line of 'Yongdong' cultivar, $149.8kg/cm^2$, was lowest in contrast with the control, $300.9kg/cm^2$.

• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.1045-1049
• /
• 1996

Post-intubation tracheoesophageal fistula is rare, and its management causes a serious problems to surgeons. We have experienced 4 cases in 3 patients. Simple ditcision and closure of the fistulas were done by trans-cervical approach after weaning of ventilator. The tracheal defect was closed by simple suture, and the esophageal defect was closed in two layers before a viable muscle flap was interposed between the two suture lines in order to prevent recurrence. There was one delayed tracheal stenosls and one recurrent fistula, and these complications were also managed success ully.

• Journal of the Korean Society of Radiology
• /
• v.85 no.3
• /
• pp.668-675
• /
• 2024

Aortic anastomotic leak is an uncommon complication after ascending aortic replacement for acute aortic dissection. Redo-surgery is the traditional standard treatment despite high mortality and morbidity. Recently, endovascular treatment has been attempted as an alternative approach in a few case reports. Here, we present two cases of aortic anastomotic leak due to suture line dehiscence after aortic graft replacement for type A aortic dissection, which were successfully treated by coil with subsequent N-butyl cyanoacrylate embolization and an Amplatzer^TM vascular plug.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.387-387
• /
• 2010

식품산업 및 가정의 주방에 이르기까지 다양한 분야에서 식품을 가공 조리하는 곳에는 보건 건강을 위하여 비닐장갑은 반드시 필요하다. 최근에는 다양한 소재를 이용하여 위생 비닐장갑을 개발을 하고 있으나 일회용성으로 저가의 물품으로 인식되어 생활에 중요성에 비해 개발이 미흡한 실정이다. 위생 비닐장갑은 다양한 산업에서 필수품으로 활용되고 있는 만큼 위생적이고 내구성이 높은 제품의 개발이 절실히 요구되는 실정이다. 이에 본 연구에서는 봉합면의 측면이 사용중 터지지 않도록 하기 위하여 봉합선의 폭을 기존의 0.1 mm 대신에 1 mm정도로 넓게 하는 기술과 무균성 위생 비닐장갑의 제조 공정 자동화에 주력함으로써, 고품위 무균성 위생비닐장갑을 열공정 안정화 자동화 공정으로 제작코자 하였다. 본 연구의 수행시 당면한 가장 큰 문제점은 봉합선의 폭이 넓어짐에 따라서 knife 형태를 갖는 가열된 금형의 칼날이 비닐과 접촉되어 실링을 하는 단계에서 금형에 비닐이 녹아서 붙어버리는 sticking 현상이 발생하였다. 이는 현장에서 심각한 문제로 더 이상 상용화가 불가능함을 의미한다. 이에 본 연구에서는 금형(die) 재료로 2가지의 서로 다른 소재를 선택해서 상온 상압플라즈마 처리를 함으로써 금형과 비닐사이에 발생하던 sticking 문제를 해결하고자 하였다. 금형으로 사용한 소재는 스테인리스(STS304)와 공구강(SCM)을 사용하였다. 두 시편에 대하여 상온상압 플라즈마 처리를 수행한 뒤 증류수와 Diiodomethane를 이용하여 접촉각과 표면에너지를 측정하였다. 상온 상압플라즈마 처리 시간은 0 ~ 9초로 하였다. 스테인리스의 경우 접촉각이 증류수를 이용하였을 때 $69.7^{\circ}$, $32.2^{\circ}$, $16.7^{\circ}$였으며 Diiodomethane을 이용하였을 때는 $37.3^{\circ}$, $17.6^{\circ}$, $10.6^{\circ}$였다. 표면에너지(surface energy)의 경우 48.13 mN/m, 72.06 mN/m, 78.66 mN/m로 플라즈마 처리시간이 길어질수록 표면 에너지 값이 증가하였다. 공구강의 경우는 증류수를 이용하였을 때 접촉각이 $70.2^{\circ}$, $36.8^{\circ}$, $28.9^{\circ}$였으며 Diiodomethane를 이용하였을 때는 $38.65^{\circ}$, $22.8^{\circ}$, $20.2^{\circ}$였다. 표면에너지의 경우 47.43 mN/m, 69 mN/m, 73.15 mN/m로 스테인리스와 같이 표면에너지 값이 커지는 것을 확인할 수 있었다. 학술대회에서는 금형의 표면에너지를 증기시키거나 감소시키는 방법에 대한 연구결과를 발표할 예정이다.