• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.80-87
• /
• 1996

국내 가동중원전의 노물리 시험중 제어봉제어능 측정시 적용되는 측정방법들에 대해 실제 측정결과를 이용해서 통계적 분석 및 추론을 수행하였다. 1988년부터 현재까지 약 8년간 모든 발전소에서 행한 측정결과에 대해 통계적 분석 및 주요 시험변수들과의 상관관계를 분석한 결과, 다음과 같은 결론이 도출되었다. 제어봉 제어능 측정결과는 전반적으로 측정치가 예측치에 비해 작은 경향을 보이고 있다. 붕산희석법은 측정오차가 가장 작았고 임의성을 가지며, 노심의 붕산농도와 상관관계가 있다. Framatome방식의 제어봉교환법은 비교적 측정오차가 크나, 시험변수들과의 상관 관계는 가장 미약하다. CE 방식의 제어봉교환법은 Swap 방법 중에는 측정오차가 가장 작고 임의성이 있으나, 붕산농도 및 기준제어군 제어능 측정오차의 크기와 강한 상관관계를 갖는다. Westinghouse 방식의 제어봉교환법은 가장 측정오차가 크며 대부분의 측정결과에서 측정치가 작게 편향되어 있다. 그리고 시험제어군의 제어능이 작을수록 측정오차가 커지는 강한 상관관계가 있으며, 기준제어군 제어능 측정오차의 크기와도 상관관계가 있다.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.131-134
• /
• 2005

• Korean Journal of Human Ecology
• /
• v.14 no.4
• /
• pp.673-681
• /
• 2005

Sewing is an important process in clothes-making. It is directly or indirectly connected to a factor of fitness, as is the case of pattern making and design. The purpose of this study is to compare and analyze the sewing methods for tight skirts currently being sold by twelve clothing companies on the market. For the purpose, the skirts, which was released in 2002 Fall season, was physically disassembled and then every sewing detail was closely investigated. The major findings are as follows: All sorts of the skirts show different sewing methods in hemlines, back slits, and zipper. Hemlines and zippers, hand-sewn, are often used by high-price brands. Brands that emphasize trends usually use machine sewing. Specifically, the sewing methods applied in the allowances at the upper part of the back slit show significant differences among brands. One method leaves allowances enough in both sides for the stability of the skirts, another trims both allowances very closely, and the other trims only left-side allowance down to the edge of the back slit. This study findings will be helpful not only in understanding sewing techniques for skirts and improving its quality, but also in offering more comfortable and superior clothes for consumers.

• The monthly packaging world
• /
• s.256
• /
• pp.106-111
• /
• 2014

환경부는 국정과제인 폐기물의 수집 운반 과정에서 폐기물의 유출 및 악취발생 등을 방지하기 위해 폐기물 수집 운반 차량을 밀폐형 차량으로 개선하고, 소규모 영세사업자의 부담을 줄이기 위해 봉제공장에서 발생되는 폐원단 조각 등을 폐기물처리 신고만으로 수집 운반할 수 있도록 완화하는 한편, 그 밖에 현행 제도의 운영상 나타난 일부 미비점을 개선 보완하고자 폐기물관리법 시행규칙 일부 개정령안을 발표했다. 본 고에서는 주요내용과 함께 신 구조문을 비교해 살펴본다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.299-300
• /
• 2003

직물은 유연하여 외력에 의해 쉽게 굽힘, 비틀림 등의 변형이 일어난다. 이러한 특성 중 직물의 굽힘은 태, 봉제성, 드레이프성 등의 중요 인자로서 지금까지 여러 연구들이 직물의 구조에 관련하여 굽힘강성을 분석하려는 시도가 계속되어 왔다. 이러한 연구의 최초의 시도로서 1930년대 Peirce가 직물을 선형탄성체로 가정한 후 외팔보법을 적용시켜 굽힘길이로 굽힘강성을 나타내었으며[l] 현재까지도 이 시험법이 시행되어 오고 있다. (중략)

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2016

The computational cost of clothing simulation and rendering is mainly depends on the type of mesh and its quality. Thus, quadrilateral meshes are generally preferred over triangular meshes for the reasons of accuracy and efficiency. This paper presents a method of quadrangulating sewing pattern based on the recursive geometry decomposition method. Herein, we proposed two simple improvements to the previous algorithms. The first one deals with the recursive geometry decomposition in which the physical domain is decomposed into simple and mappable regions. The second proposed algorithm deals with the vertex validation in which the invalid vertex classification can be validated.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.6
• /
• pp.449-453
• /
• 2009

This study focused on the content characteristics of regulated hazardous substances in specific wastes. Regulated heavy metal such as Cu, Pb, Cd analyzed the 108 waste samples that it choice from the representative facilities. Analytical method used content test method, suggested on the basis of analytical method of developing country, and the results as compared with limited standard in Austria Petroleum, primary metalworking and electronic industry had high content of Cu more than 100 mg/kg of Austria limited standard. Pb detected high level concentration the sample that dust producted at Primary metalworking industry. In case of total Cr was show that high content at KSIC 18, 19, 23 etc but result analyzed Cr(VI), it was shown that high level at dust producted from sewing clothes and fur industry.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.177-201
• /
• 2011

Myanmar had fallen behind other southeast asian nations since Burmese way to Socialism settled down. However, historically second election in Myanmar hold in 2011 and dramatic changes in areas such as Special Economic Zone announcement, the very huge inflows of foreign direct investment in a year of 2009, the infrastructure building projects, a permit of the right to strike for Labour Organization in Myanmar etc. Particularly, Foreign investments and trade with neighbouring countries are actively growing and also with Korea. But investments of Korea in Myanmar relatively are not diversity, with limited sectors such as mining and sewing manufacturing. In this point of view, this paper is trying to make implications for strategies of entry and investments of Korea in Myanmar by using previous papers related to Myanmar economies, trade and foreign investments with updated statistical data. The implications for Korea is that recently Myanmar economy is in its early stages of development. Although it can occur huge demand of railway, road, communications and constructions related to social infrastructures essentially needed for development of a country, these sectors relatively need huge investments. On the other hands, textile and sewing industry relatively need smaller investments in which investors can utilize low labour cost and a position for export to third countries. But those firms which set up for those purpose in Myanmar might have trouble creating domestic markets in future. Moreover, due to demand which occur in the early stage of growth in Myanmar, trade volume tend to increase and trading is also possible to invest but Myanmar still have lots of problems with infrastructure such as road and logistics and we need to make pre-survey for the costs and benefits of our products Finally, Myanmar government is trying to promote and encourage some of industries such as export-oriented industry, import substitution industry and labour-intensive industry. It can also means they will accumulate capital which can be sources for Myanmar economic growth.