• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.468-484
• /
• 1992

본 연구에서는 기존의 유연 볼 엔드밀의 절삭력 모델을 바탕으로 자유 곡면의 정삭 가공에서 발생할 수 있는 과대 또는 과소 절삭을 방지하면서 그 가공의 효율성을 높이기 위한 볼 엔드밀의 이송 속도 결정법을 제시하고자 한다. 먼저, 자유 곡면의 가공에서 발생될 수 있는 공구의 처짐에 따른 가공오차에 대하여 볼 엔드밀 공구의 처 짐벡터와 공작물의 공구 접촉점에서의 법선벡터로 표현되는 가공오차(machining error ) 예측 모델식을 유도하였다. 본 가공오차 예측 모델식은 다시 절삭날당 가지는 이 송량의 함수로 전개되어 그 곡면의 주어진 가공 공차(machining tolerance)를 만족시 키는 이송속도를 결정하게 된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1067-1082
• /
• 1991

본 연구에서는 비교적 강성이 약한 볼 엔드밀 공구에 있어서 처짐으로 인한 그 가공 특성을 알기 위하여, 변화된 칩 두께 및 처짐 모델로부터 절삭력을 예측하며 또한 절삭력에 의한 공구의 처짐으로 인하여 공구의 플랭크 부위와 공작물간의 발생하 는 간섭 특성을 고찰하고, 이러한 특성이 절삭성과 가공 오차에 미치는 영향을 실험을 통하여 분석하여 본다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1572-1586
• /
• 1991

본 연구에서는 볼 엔드밀 공구를 사용한 코너가공에서 절삭력을 예측하고, 가 공중 공구의 회전주기에 대한 최대 수평합력(max. resulant force)을 일정하게 유지시 키는 모델을 개발하고, 코너가공에 적용한다. 또 금형가공에는 절삭시간을 많이 소 요하여 생산성이 떨어지게 하는 주요한 원인이 되기 때문에 최대 수평합력을 황삭가공 에 적합하도록 설정하면 본 연구의 결과로 이송속도를 결정할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.433-442
• /
• 1989

Owing to the development of CNC machine tools and automatic programing software, the milling process with ball-end mill has become the most widely used process where three-dimensional precision machining is important. In this study, the ball-end milling process has been analyzed and a cutting force model has been developed to predict the cutting force acting on the ball-end mill on given machining conditions. The development of the model is based on the analysis of geometry of a ball-end mill an the oblique cutting process. The cutting edges of ball-end mills are considered as a series of infinitesimal elements and the geometry of the cutting edge element each cutting edge element is straight. The oblique cutting process in the small cutting edge element has been analyzed as orthogonal cutting process in the plane containing the cutting velocity vector and chip-flow vector. Hence, with the orthogonal cutting data obtained from orthogonal turning test, the cutting forces can be predicted through the model. The predicted cutting forces has shown a fairly good agreement with the test results in various plane cutting conditions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1669-1680
• /
• 1992

This paper deals with the prediction of cutting force and tool deflection and it's application in the flexible ball end milling process. Machining accuracy is determined by the static stiffness of tool system and the instantaneous cutting force. The static stiffness of tool system consists of the stiffness of holer and the stiffness of ball end mill. The stiffness of holder was obtained from the experimental result, and the stiffness of ball end mill with two flutes was theoretically analyzed by the finite elements method. In cutting process, the instantaneous cutting force is dependent upon the instantaneous feed and pick feed(radial depth of cut) which are varied by tool deflection. For the calculation of cutting force and deflection of ball end mill, iteration method is used with the linear interpolation to the data of cutting force obtained from rigid ball end mill and the data of tool deflection. In this paper, a for enhancing accuracy is discussed. And the selection of helix angle for minimizing machining error is also discussed.

• 기계와재료
• /
• v.15 no.3 s.57
• /
• pp.62-74
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.95-100
• /
• 1993

본 연구에서는 볼 엔드밀을 사용한 5축 가공에서 공구 간섭회피를 위한 효율적인 알고리즘과 가공 가능한 많은 자세들 중에서 공구 절삭부위와 이전자세를 고려한 공구 자세설정 알고리즘을 개발 하였다. 공구 간섭검사는 공구 밑면 간섭과 몸체 간섭으로 나누어 순차적으로 수행하고, 공구 몸채 간섭이 없는 공구 자세를 설정한다. 공구 몸체 간섭검사는 곡면의 다각형 모델과 공구 축과의 관계를 사용하여 행한다. 간섭이 발생하였을 경우 간섭회피 및 자세조정 영역으로 설정하고 유효한 공구자세의 범위를 정한 후, 이 범위 내에서 공구 절삭 부위 및 이전 자세를 고려한 효율적 공구자세를 사용하여 공구경로를 산출하였으며, 시뮬레이터를 통해 그 유효성을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.39-46
• /
• 2006

In this work a dynamic cutting force model in ball end milling of inclined surface is introduced. To represent the complex cutting geometry in ball end milling of inclined surface, workpiece is modeled with Z-map method and cutting edges are divided into finite cutting edge elements. As tool rotates and vibrates, a finite cutting edge element makes two triangular sub-patches. Using the number of nodes in workpiece which are in the interior of sub-patches, instant average uncut chip thickness is derived. Instant dynamic cutting forces are computed with the chip thickness and cutting coefficients. The deformation of cutting tool induced by cutting farces is also computed. With iterative computation of these procedures, a dynamic cutting force model is generated. The model is verified with several experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.139-142
• /
• 1995

Inconel 718 is one of the most difficut workpiece for machining, So it is necessary to evaluate the machining characteristics of Inconel 718 In this study, High speed machining of this material was carried out with Tin coated WC ball endmill and TiN coated HSS ball endmill. The cutting force and shape of machined surface and cip type were investigated according to variation of cutting speed,feed rate and depth of cut

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.125-128
• /
• 1997

They use a Ball End-mill in order to manufacturing sculptured surface when making metal mold, mold, cars and aircraft. In the work of a Ball End-mill case, customers do not often satisfied with manufacturing precision. Eventually, they have to re-work for the purpose of meeting manufacturing precision. There are resulted in lots of loss, whereby, in terms of both time and costs. The reasons of tolerance reducing manufacturing precision are thermal strain, the surface is damaged because of increasing cutting force and tool wear, tool deflection etc.. We focus on, however, manufacturing precision caused due to deflection of tool.