• ETRI Journal
• /
• v.8 no.4
• /
• pp.124-132
• /
• 1986

본고는 신뢰도상에서 점차 중요시 되어가고 있는 전자통신 장비의 기구물 및 시설의 안정성에 관한 논문으로서 TDX-1 전자교환기를 현장에 설치할 때 시스팀을 고정한 앵커볼트 결합체(앵커볼트+콘크리트 바닥) 에 대한 것이다. 이 앵커볼트 결합체에 하중이 가해졌을 경우 어떤 식으로 파괴가 일어나며, 어느 정도의 하중에서 파괴가 일어나는 가를 수치적 해석과 실험적인 방법으로 산출하여 그 안정성을 입증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.309-312
• /
• 2011

본 논문에서는 유무선 통신환경의 클라이언트-서버 모델에서 바이오정보를 이용해 비밀 키 또는 비밀 정보를 실시간 공유할 수 있는 신뢰구간 기반의 바이오-암호 기법을 설계하고 분석한다. 제안하는 바이오-암호 기법은 키 결합 방식의 바이오-암호 기법의 대표적인 기법의 하나인 퍼지볼트 기법을 기본 모델로 두고 있으나, 퍼지볼트 기법의 주요 이슈인 거짓 볼트 수의 증가에 따른 인식률 저하, 고차 다항식 복원 시간의 실용성 여부, 상관 공격에의 취약을 해결하기 위하여 T-검정 기반 신뢰구간을 적용한 키 결합 방식으로 설계하였다. 실험결과는 거짓 볼트 수의 증가와 상관없이 항상 비밀 키를 획득해 보안성과 정확성이 향상되고, 이때의 수행시간도 사용자가 인지하기 힘든 작은 값으로 실시간 사용의 가능성을 높이고, 유사 바이오정보로 비밀 키를 획득할 수 없어 상관 공격에도 강인함을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.707-713
• /
• 2013

Coupling bolts have replaced conventional fitted bolts in applications where the operator's safety during assembly/disassembly is of concern or where the cost of process interruption is significant. Coupling bolts have been installed on rotating flange couplings in a wide range of marine and power applications worldwide. Their use has been approved by all leading international and national classification societies and regulatory bodies. A coupling bolt is a hydraulically tensioned fitted bolt that creates a stable and rigid link between coupling flanges and simplifies assembly and disassembly. We measure the bolt dimensions for reverse engineering and study the standard of assembly-load using a mechanical formula in order to localize a coupling bolt for a shaft in a power plant. We experimentally obtain the friction coefficient and confirm the condition of bolt sets through structure analysis. We show the variation of contact pressure for the shape parameter in order to consider the result when redesigning a bolt.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.243-246
• /
• 2006

Most of the guided weapons have been kept and transferred at the launching tube and fired in case of necessity in these day. Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. When we attached the guided weapons to launching tube we usually has used explosive bolt. Explosive bolts have been used explosives when they had to be separated. But when they are separated there are some bad effects; a flame, fragments and pyre-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems we invented ball type bolt. Unlike explosive bolt, ball type bolt is separated without a flame, fragments and pyre-shock. And it also has a good mechanical properties as much as those of explosive bolt.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.179-182
• /
• 2008

Most of the guided weapons have been kept and transferred at the launching tube and fired in case of necessity in these day. Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. When we attached the guided weapons to launching tube we usually has used explosive bolt. Explosive bolts have been used explosives when they had to be separated. But when they are separated there are some bad effects; a flame, fragments and pyro-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems we invented ball type bolt. Unlike explosive bolt, ball type bolt is separated without a flame, fragments and pyro-shock. And it also has a good mechanical properties as much as those of explosive bolt.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.38-45
• /
• 2005

This research was investigated on the increase in strength capacity among different five wood-to-wood connections. Group using small diameter bolts with equal area loss has the highest increase in strength capacity, secondly the group inserted plywood, thirdly the group used glued bolt, and lastly the group inserted rubber plate. These groups showed at least 10% increase in strength capacity more than existing connection groups. Therefore, these results can be applied to develop the new highly efficient connection. To select suitable connection configuration and materials, however, economical advantage and increase in strength capacity and the difficulty should be considered by the additional works.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.419-426
• /
• 2015

This paper proposes a fingerprint verification system on a fuzzy vault with steganography for a smartphone. While biometric-based authentication can provide strong security, the biometric data must be handled carefully as it cannot be re-enrolled when it is revealed to other people. When the transformed data is used for authentication, the original biometric data can be protected. In this paper, we combine a fingerprint verification system with a fuzzy vault scheme to protect the fingerprint data of a smartphone user. In addition, the transformed data using a fuzzy vault scheme increases the security as it is concealed by the steganography scheme. The result of the experiment using fingerprint databases shows that the proposed scheme provides a high level of convenience and security for authentication of a smartphone having with a fingerprint sensor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.645-650
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult to know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure, using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted joints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.990-998
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult the know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted Joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted feints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.291-297
• /
• 2009

Relaxation of high strength bolts was investigated. Block type and splice type specimens were fabricated with different types of bolts and different clamping lengths. Bolts were tightened to the specified torque. Clamping forces were measured through strain gauges installed on the shafts of bolts, while specimens were kept in a constant temperature and humidity. In all cases, ratio of clamping force reduction is less than 10%. Test results of different types of specimens and bolts and different clamping lengths were compared each other by using a simple model, which is suggested in this study for the estimation of bolt relaxation. The suggested model shows reasonably good agreements with test results for all cases. No difference is found between F13T and F10T bolts, but Dacro coated bolts shows higher relaxation than black bolts by approx. 30%. And also the comparison of test results shows that ratios of bolt relaxation become larger as clamping lengths of bolt shorter and the number of faying surfaces greater.