• Journal of the KSME
• /
• v.33 no.1
• /
• pp.22-32
• /
• 1993

본드선도는 물리적 등가가 적용되는 모든 상사 시스템을 대단히 조직이며 일관성 있게 모델링할 수있을 뿐만 아니라 시스템의 동적 방정식을 제어동역학 관점에 유리한 상태방정식으로 직접 유도할 수 있다. 또한 본드선도는 모델링 단계에서 무시된 각 요소들의 동적 특성 즉, 기계시스 템에서 회전축의 탄성처짐이나 운동 물체들 사이의 마찰 효과 전기 . 자기시스템에서 자속유출량, 그리고 유체 . 유압시스템에서 밀봉부분의 유량손실이나 압축성 유체 특성 등을 기곤에 구성된 본드선도의 변경 없이 각 특성들이 나타나는 본드상에 적절한 접합요소와 함께 단순히 첨가하여 고려할 수 있기 때문에 모델링 과정을 다시 반복하지 않고도 무시된 동적 특성들이 전체시스템에 미치는 영향을 파악할 수 있다. 특히 본드선도가 에너지 변환 장치나 에너지 유동 메카니즘이 복잡한 다에너지역 시스템 등에 거동이 전체시스템에 미치는 효과를 시각적으로 보다 세밀히 파악할 수 있을 뿐만 아니라 구성된 본드선도에 인과관계를 할당하여 본드선도의 접합요소를 통하여 유도된 최종적인 동적 방정식이 현실적으로 실현 가능한 물리시스템인지 파악할 수 있어 본드선도 모델링 단계에서 시스템을 묘사하는 동적 방정식의 옳고 그름을 평가할 수 있다. 이와 같이 본드선도는 기계, 전기 . 자기, 유체 . 유압, 열 시스템 및 이들이 조합된 복잡한 다에너지역 시스템 등을 효과적으로 모데링할 수 있는 매우 유용한 동적 시스템 모델링 방법이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1620-1634
• /
• 1991

본 연구에서는 전기/자기 및 기계적 요소들이 복합되어 이루어진 자기부상 시 스템의 설현을 위한 기초단계로서 제어동역학(controlled dynamics) 측면에 입각한 모 델식을 본드선도 기법을 이용하여 보다 조직적으로 유도한다. 우선, 자속흐름 확장 및 자속 유출량을 고려하여 부상 시스템을 모델링하고 차량/레일 및 2차 현가(second ary suspension)장치를 포함한 자기부상 시스템을 모델링한다. 다음, 지지 및 안내 방향의 동역학을 동시에 고려한 2차원 자기부상 시스템을 본드선도의 다접점 필드(mu- ltiport field) 개념을 이용하여 모델링한다. 끝으로, 본드선도 기법으로 모델링된 2차원 자기부상 시스템의 안정도와 성능을 향상시키기 위하여 LOG/LTR(linear quadra- tic Gaussian control with loop transfer recovery) 제어시스템을 설계한다. LQG/ LTR 제어방법은 Doyle과 Stein에 의해 인성(stability-robustness) 문제와 주파수역 성능을 설계시에 직접 고려할 수 있는 강력한 선형 다변수 제어시스템 설곕방법으로 현재 널리 사용되고 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.81-91
• /
• 2002

In this paper, a high-quality integrated transformer using bondwires is proposed and fabricated. The bondwire transformer inherently has low conductor loss due to wide cross-section and small parasitic capacitance because the vertical placement of the bondwire loop separates from substrate and effectively reduces the substrate effects. It can be fabricated easily by used of the modern automatic wirebonding technology. The electrical characteristics of the fabricated transformers are compared with those of the spiral transformer It is expected that the bondwire transformer can improve the performance for RFIC and MMIC applied to a variety of application, for example, Mixer, Balanced Amplifier, VCO, and LNA.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.310-316
• /
• 1996

In this study magnetic properties of anisotropic ferrite bonded magnets produced by extrusion molding with a variety of magnetic field, extrusion mold temperature and extrusion rate were investigated. X-ray diffraction study showed the alignment of magnetic powder was decreased by molten flow in extrusion mold. When the temperature of extrusion mold was $20^{\circ}C$, the degree of alignment as much as 82% could be achieved under the applied magnetic field of 4 kOe. The bonded magnets having the remanence of 2.2 kG was able to fabricated by extrusion molding when the packing density of Sr-ferrite powder was 50 vol%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.559-565
• /
• 2002

Today, because a quality factor of the inductor fabricated on silicon substrate for RFIC is under 12, the realization of inductor haying high-Q is essential. In this paper, two inductors having improved Q-factor are proposed and fabricated using a bondwire on silicon substrate. Also for the PGS is applied to the same inductors, four inductors are fabricated finally The bondwire Inductors have the relatively low conductor loss due to wide cross-section area and they can reduce the parastic capacitance very much because they are located in the air. Simulation and measurement results show that the proposed inductors have much more improved Q-factor, 15, than a conventional spiral inductor at 1.5 GHz. Because of the use of an automatic bonding machine, we can fabricate the high - Q inductors very easily, repeatedly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1453-1459
• /
• 2012

The dual stage manipulator is composed of the voice coil motor (VCM) and piezoelectric ceramics transducer (PZT), which can produce the high precise displacement and express a well dynamic performance. However, inaccurate modeling of the dual stage will exacerbate the positioning accuracy. This paper presents an approach to model the dual stage system by using bond graph theory. And the state space equations can be derived through the bond graph straightforwardly, which can be used in computing simulations. Through designing the compensators for the dual stage system and simulating, the dual stage performs better dynamics characteristic than the single actuator system.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.537-544
• /
• 2022

This paper analyzes the occurrence and cause of bond wires fusing used in the manufacture of pulsed high power amplifiers. Recently GaN HEMT has been spotlight in the fields of electronic warfare, radar, base station and satellite communication. In order to produce the maximum output power, which is the main performance of the high-power amplifier, optimal impedance matching is required. And the material, diameter and number of bond wires must be determined in consideration of not only the rated current but also the heat generated by the transient current. In particular, it was confirmed that compound semiconductor with a wide energy band gap such as GaN trigger fusing of the bond wire due to an increase in thermal resistance when the design efficiency is low or the heat dissipation is insufficient. This data has been simulated for exothermic conditions, and it is expected to be used as a reference for applications using GaN devices as verified through IR microscope.

• Cartoon and Animation Studies
• /
• s.31
• /
• pp.117-152
• /
• 2013

is a comics that the original Yoshokawa Eiji's novel . Since the series started in 1998, it's epic that records the 54 million or more copies of the cumulative sales volume to 1.7 million unit volume average in the book, 34 are currently up to volume has been published. proceeds with narratives in a way of following naturally the personality of a character based on the rule of an author, which is 'people should be described as what they are'. Accordingly it features very unique characterizing. This study focused on the fact that numerous characters in maintain a structural balance through the establishment of a character composition in an antipodal relationship although those characters have strong personalities. In order to analyze the relationship of such characters, the study utilized as an analytic frame MBTI personality types theory which is a psychology test tool. First, the study inferred personality patterns as the temperamental characteristics of MBTI, and tried to analyze the antipodal character composition based on the combination of cognition and judgment which are assumably the most important functions. From this, the study was able to discover the following three structures applied to those characters. (1) The antipodism between Musasi, the main character and Kojiro, a mirror character becomes central to the work, (2) The antipodal relationship between their fosterers and the character playing the mentor's role extends the character attribute of Musasi and Kojiro. (3) The Yoshioka family was also established in the antipodal composition as a role of exchanging influences with Musasi and Kojiro. Through this, the study reached a conclusion that in the pairs of characters in contrast were established as if to reach a dialectic synthesis. As such, the antipodal structuralization of the character composition shown in is deemed to differentiate the inner sides of numerous unique characters; thereby make it possible to describe their inner sides in-depth. Finally, the following common context is found: works in the field of successful comics and animation in terms of criticism and performance are focused on characters. It is probably because their consumers are relatively very interested in those characters as the characters in comics or animation become differentiated from those of novels or movies. Subsequently, it is expected that the analyzed results of characterizing can be referred to during the production of contents by preparing the results as database.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.553-558
• /
• 2002

In this paper, an integrated balun using bondwire transformer is fabricated and measured. The bondwire transformer has 1ow conductor and substrate loss and kas high resonance frequency. So it is available to implement low loss broadband balun. From the measured results, 0.7 dB amplitude imbalance and about 2.5 $^{\circ}$ phase imbalance was achieved from 8.15 to 16.18 GHz. It is expected that the proposed balun can improve the performance of mixers, amplifiers and matching networks of antennas. It can also be integrated with other components due to its easier fabrication and smaller size than spiral transformer balun.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.155-162
• /
• 2000

전해 인프로세스 드레싱(ELID)의 응용기술로써 간헐적 드레싱(ELID II) 및 무전극 드레싱(ELID III)이 원통내면 마무리 연삭에 이용되고 있다. 주철본드(CIB-D) 및 메탈레진본드 다이아몬드 숫돌(HRB-D)이 이 방식들에 사용되고 있다. 경면 가공에 있어서 이 두방식은 미립의 숫돌이용으로 일반연삭기에 정밀부속 장치의 보완없이 이용될 수 있다. ELID II 연삭에서 CIB-D숫돌은 파이프 형상의 전극에 의하여 간헐적으로 드레싱되고, 반면에 MRB-D 숫돌은 인프로세스 드레싱 되며 전극은 필요로 하지 않는다. 본 연구에서는 ELID II 및 ELID III 방식에 있어서, 연삭조건 및 연삭입자크기에 대한 연삭특성을 비교검토 하였다. 그 결과, ELID II, III방식 공히 대단히 작은 표면거칠기를 갖는 경면이 얻어짐을 확인하였다.