• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.873-882
• /
• 2021

In this study, a study was conducted to develop a system for predicting/responding to black ice occurring on roads in winter. Tests conditions were studied by making models of cement concrete pavement and asphalt concrete pavement. In order to freeze water on the manufactured model package, an tests was conducted at a temperature below zero using a freezer, and the freezing process was photographed using a thermal imaging camera. Black ice is generated when water is present on the road surface and the temperature is below freezing or the road surface temperature is below the dew point temperature. Under sub-zero conditions, the pavement, water, and ice were classified with a thermal imaging camera. As a result of the tests, it was possible to distinguish with a thermal imaging camera at a temperature below freezing in the same freezer due to the difference in the emissivity of the packaging, water, and ice. In the process of changing from water to ice during the tests, it was analyzed that ice and water were clearly distinguished by the thermal imaging camera due to the difference in emissivity and reflectance, so black ice could be predicted using the thermal imaging camera.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.927-935
• /
• 2021

This study conducted a study to improve the problems of the existing fire sensor system. In the case of the existing system, it took more than 3 minutes to detect a fire even at a short distance, making it difficult to extinguish the initial fire. In order to improve these problems, in this study, a fire detection system using an infrared thermal imaging camera was studied. The infrared image-based fire detection system is relatively wide and can detect fire over a long distance, so it has the advantage of being applicable to many fire detection systems. As a result of conducting a field test using the fire detection system, a fire that occurred about 2 km ahead was detected within about 10 seconds. Since the fire detection function of this system can detect within 10 seconds from a distance of about 2 km, it was applicable to forest fires that occur frequently in spring and autumn.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1611-1613
• /
• 1999

This paper introduces the data processing method and the measurement of the leakage current flowing through polymer insulators. For ageing diagnosis of polymer insulator, data aquisition system was developed to record the leakage current of insulator being tested. Hence, we have gained information for life time from its leakage current. the DAS is protected against over-voltage which would develop in the event of a flashover of the test sample.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.11-15
• /
• 1996

무기막은 고분자막에 비해 기계적, 열화학적 안정성이 매우 크기 때문에 다양한 분야에 응용이 가능하다. 따라서, 이러한 무기막의 장점을 이용한 분리 공정의 개발 및 분리 성능이 탁월한 새로운 형태의 무기막을 개발하려는 노력이 활발히 이루어지고 있다. 현재까지는 주로 액상분리, 농축 공정 등에 활용이 되어왔으나, 최근 들어서는 기체 분리 또는 반응 등의 분야에 이용하기 위한 다양한 형태의 막 제조와 이들을 이용한 공정개발에대한 연구가 많이 이루어지고 있다. 특히, 고분자막의 활용이 불가능한 200$\circ$C 이상의 고온조건에서 이루어지는 기체분리 또는 촉매반응 등의 분야에 무기막을 이용하려는 연구가 활발하다. 본 연구에서는 상압화학증착법을 이용하여 다공성 유리관 위에 타이타니아, 실리카, 알루미나 등의 복합박막을 제조하고, 제조변수가 분리막의 특성에 미치는 영향에 대해 살펴보았다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.665-670
• /
• 2001

The studies on chloride diffusion of concrete have been done so far by many researchers. However, there are few studies that present the effects of other attacks on chloride diffusion properties. Therefore, in this study the experiments are carried out to show the effects of combined attacks, such as carbonation, sulfate attacks, on chloride diffusivity in concrete. The specimens are made by varying cement type and replacement ratio of fly ash. The results show that cement type and replacement of fly ash do not affect greatly chloride diffusion properties. And concrete treated by combined attacks show a little higher chloride content than those treated by chloride solution only. Therefore, the effects of these factors should be taken into account in predicting the penetration of chloride ion in concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.771-776
• /
• 2001

Test results on the deterioration process of concrete under single and combined attacks of chloride penetration have been obtained. After test period of 52 weeks, it is found that the internally penetrated chloride ion contents are less in the single attacks of chloride than the combined attacks of chloride and sulfate. Both the diffusion coefficients and surface chloride concentration derived form the chloride profiles showed a time dependence. Also the performance of fly ash-blended cements was observed to be better than plain cements in retarding chloride attack. However it should be needed that improved chloride diffusion model for the combined deterioration process.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.143-144
• /
• 2008

본 논문은 오디오 압축시 하모닉의 특성을 적용함으로써 신호의 압축률을 향상시킬 수 있도록 하는 내용을 기술하고 있다. 하모닉 코딩은 오디오 신호가 가지는 특징인 복합음(Complex tone)의 특성을 이용하는 것으로, 주파수 공간에서 정수배의 주파수가 존재하며, 정면파의 특성상 시간적으로 인접 신호들간의 유사성이 매우 높은 특징을 이용하여 압축효율을 향상시키는 방법이다. 하지만 실질적인 오디오 신호의 경우, 악기들의 harmonic stretch, 전달과정에서 발생하는 신호의 왜곡, 외부 잡음등의 특성으로 인하여 수집된 오디오 신호를 분석하는 과정에서 부정확한 하모닉의 판단이 이루어질 가능성이 높으며, 이는 압축과정에서 심각한 음질의 열화를 가져오게 된다. 따라서 본 논문에서는 프레림간의 변화 추이의 판단을 통하여 하모닉의 변화를 예측하고, 예측 오류에 대한 보상값을 전달함으로써 오디오 신호의 안정적인 압축/복원이 가능하도록 하는 신호처리 방법에 대한 내용을 기술하고있다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.278-284
• /
• 2006

암반내 존재하는 불연속면은 암반거동에 중대한 영향을 미치게 되며, 특히 불연속면내에 충전물이 협재되어 있는 경우에는 암반구조물의 안정성에 보다 심각한 문제를 가져오는 경우가 많다. 이는 불연속면의 거동과 충전물의 거동이 복합적으로 작용하게 되며, 장기적인 시간을 두고 나타나기 때문이다. 본 검토에서는 충전된 불연속면의 특성을 분석하고, 점토나 흑연이 협재되어 문제가 되었던 현장 사례분석을 통하여 충전된 불연속면이 암반사면이나 터널과 같은 암반구조물에 미치는 영향을 검토하였다. 이를 통하여 충전물의 열화에 의한 장기적이고 잠재적인 거동을 수반할 수 있는 충전된 불연속면의 공학적 문제점을 고찰하였다.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.976-979
• /
• 1992

There are lots of problem which are delaminations and partial discharge of insulation materials in high-voltage rotating machines caused by mechanical, electrical and thermal aging. Several experiments have been aiming at finding the useful diagnostic parameters from the partial discharge characteristics by applying a new measurement techniques. This paper deals with the partial discharge characteristics (pulse height, pulse angle, pulse frequency spectrum and time interval), which may be a useful diagnostic concept in predicting insulation condition of mica/epoxy composite insulation materials, by using several measurement equipments (frequency spectrum analyzer. multichannel analyzer and time interval analyzer).

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.337-343
• /
• 2003

Nanostructured Cu-$Al_2O_3$ composite powders were synthesized by thermochemical process. The synthesis procedures are 1) preparation of precursor powder by spray drying of solution made from water-soluble copper and aluminum nitrates, 2) air heat treatments to evaporate volatile components in the precursor powder and synthesis of nano-structured CuO + $Al_2O_3$, and 3) CuO reduction by hydrogen into pure Cu. The suggested procedures stimulated the formation of the gamma-$Al_2O_3$, and different alumina formation behaviors appeared with various heat treating temperatures. The mean particle size of the final Cu/$Al_2O_3$ composite powders produced was 20 nm, and the electrical conductivity and hardness in the hot-extruded bulk were competitive with Cu/$Al_2O_3$ composite by the conventional internal oxidation process.