• Composites Research
• /
• v.15 no.3
• /
• pp.30-38
• /
• 2002

Fiber Bragg grating(FBG) like other optical fiber sensors also has the merit of embedding capability. To increase their actual value related to embedding capability, this paper reported the reliability and signal characteristics of FBGS embedded in composite laminates. The microphotographs of embedded optical fibers visualized the embedding environments of stripped optical fibers and coated optical fibers. Based on these microphotographs and cure monitoring performed using FBGs, we could understand that the main cause breaking the unique Bragg condition of low-birefrigence FBG were residual stress artier curing and reported the stale of stress/strain of optical fiber quantitatively. The cure monitoring also showed the history of splitting peak of a stripped FBG along cure processing. In addition, we could obtain a transverse insensitive grating(TIG) with ease by recoating a stripped FBG. TIG has good advantage for real-time signal processing.

• Composites Research
• /
• v.14 no.5
• /
• pp.12-19
• /
• 2001

In aircraft composite structures, structural defects such as matrix cracks, delaminations and fiber breakages are hard to detect if they are breaking out in operating condition. Therefore, to assure the structural integrity, it is desirable to perform the real-time health monitoring of the structures. In this study, a fiber optic sensor was applied to the composite beams to monitor failure and strain in real-time. To detect the failure signal and strain simultaneously, laser diode and ASE broadband source were applied in a single EFPI sensor using wavelength division multiplexer. Short time courier transform and wavelet transform were used to characterize the failure signal and to determine the moment of failure. And the strain measured by AEFPI was compared with the that of strain gage. From the result of the tensile test, strain measured by the AEFPI agreed with the value of electric strain gage and the failure detection system could detect the moment of failure with high sensitivity to recognize the onset of micro-crack failure signal.

• Composites Research
• /
• v.30 no.3
• /
• pp.202-208
• /
• 2017

Resin transfer molding (RTM) is a mass production process that allows the fabrication of composites ranging in size from small to large. Recently, fast curing resins with a curing time of less than about 10 minutes have been used in the automotive and aerospace industries. The viscosity of resin is bound up with the degree of cure, and it can be changed rapidly in the fast-cure resin system during the mold filling process. Therefore, it is advantageous to experimentally measure and evaluate the degree of cure because it requires much effort to predict the flow characteristics and cure of the fast curing resin. DMA and dielectric technique are the typical methods to measure the degree of cure of composite materials. In this paper, the resin flow and degree of cure were measured through the multi-channel dielectric system. A total of 8 channels of dielectric sensors were used and resin flow and degree of cure were measured and compared with each other under various pressure conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.29-34
• /
• 2006

This study experimentally investigates the characteristics of Lamb wave propagating in a composite plate of varied thickness. In practical aerospace structures, there are so many parts that have varied thickness. Therefore, in order to employ the Lamb wave in a structural health monitoring of those parts, it is necessary to understand correctly the characteristics of Lamb wave for the structure with thickness variation. Thin surface-bonded piezoelectric transducers, which have great potential in integrated monitoring systems for structural health, were used to generate and receive Lamb waves. The predicted propagation velocity under the assumptions of ideal mode conversions was compared with the experimentally measured one. The validity of the results was supported by the frequency analysis of the signals. Consequently, the results show that the transient region is occurred when Lamb waves propagate across the region that thickness variation over some gradient exists.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.347-354
• /
• 2013

In contrast to the increase in demand for high quality healthcare, there is limited medical human resources such as doctors and nurses so an excessive amount of workload is being forced to them. Therefore, a patient monitoring system using USN(Ubiquitous Sensor Network) is becoming a solution. This paper proposes a patient monitoring system applying USN in maternity hospital to reduce the workload of nurses. According to the efficiency evaluation test based on the model of two university hospitals(S, K University Hospital) and their doctor's diagnosis, the results showed that under the circumstances that one nurse is in charge of 12 patients(6 normal delivery patients and 6 cesarean delivery patients), a total of 1,260 minutes of workload was saved during hospitalization period(5 days). Also, we compared the workload of nurses with or without our proposed system, and the figures showed that in case of normal delivery patients, the workload of nurses decreased by 50 minutes per patient, whereas in case of cesarean delivery patients, the workload of nurses decreased by 130 minutes per patient.

• Journal of the Korean earth science society
• /
• v.36 no.1
• /
• pp.16-26
• /
• 2015

To investigate the applicability of physical prospecting technique in soft ground assessment, the resistivity monitoring data of 6 months are acquired. The Multichannel Analysis Surface Wave (MASW) has been additionally performed to identify the shear wave velocity and strength distribution of soft ground. Moreover, by using the Cone Penetration Test (CPT) and laboratory tests of drilling samples, a relationship with the physical prospect data is checked and the reliability of the physical prospect data is increased. Through these activities, the behavior patterns of soft soil are identified by long term monitoring, and the significant relationship between the shear wave velocity and laboratory tests has been confirmed, both of which can be useful in the surface wave exploration to evaluate the strength of soft ground. Finally, using the geostatistical method, 3-dimensional soil base distribution images are obtained about the combined physical prospecting data with heterogeneous data. Through the studies, the nature of entire area can be determined by long term resistivity monitoring for the soft ground assessment in wider area. It would be more economic and reliable if additional exploring and drilling samples can be analyzed, which can reinforce the assessment.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.169-184
• /
• 2022

The purpose of this study is to give a help organizations facing various crises establish effective crisis preparedness plans by confirming the effect of an organization's crisis management system on crisis preparedness, and by confirming the multiple mediating effects of crisis monitoring and learning from failure. The survey for the empirical study was conducted targeting 121 executives, directors, mangers and mid-level employees of the MBA program of the P National University. Confirmatory factor analysis, reliability analysis, and regression analysis were performed using SPSS 25 and Amos 25, and mediating effect analysis was performed using the boot-strapping technique using process macro. As a result of the study, it was found that the crisis management system had a positive (+) effect on crisis preparedness, and learning from failure and crisis monitoring multi-mediate between the crisis management system and crisis preparedness. Through the research results, it was confirmed that there was a significant effect of learning from failure and crisis monitoring that had an effect on crisis preparedness. As an implication, a crisis preparedness plan suitable for the organizational situation was presented, and the limitations of the study and future research directions were presented.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.206-206
• /
• 2020

토지이용의 고도화에 따라 비점오염원 부하는 증가하는 추세이며 기후변화에 따른 강우강도 증가 등으로 지표면에 축적된 고농도의 비점오염물질이 하천으로 유출, 수질오염을 가중시키고 있어 비점오염원 관리가 필요하다. 환경부에서 효율적인 비점오염원 관리를 위하여 2004년부터 현재까지 3단계에 걸쳐 비점오염원 관리 종합대책을 수행하고 있으며, 2008년부터 비점국고보조사업을 추진하여 비점오염저감시설 설치를 통한 수질개선 및 수생태계 건강성 확보에 기여하고자 하였다. 이에 본 연구는 비점국고보고사업을 통해 구축된 비점오염저감시설을 대상으로 시설 설치 및 운영 현황과 강우시 비점오염저감 효과 분석을 통한 시설의 평가를 수행하고자 한다. 연구대상시설은 시범시설 및 국고보조시설 총 70개소로 2005~2017년에 준공되었으며, 2016년부터 현재까지 총 4년동안 진행된 모니터링을 바탕으로 연구를 수행하였다. 시설의 용량은 34~97,000㎥의 범위로 SA/CA 1.2~6.6%의 범위이다. 강우시 모니터링은 선행무강우일수 3일이상을 고려하여 수행하였으며 도시지역의 경우 5mm 이상, 농촌지역 10mm 이상시 모니터링을 진행하였다. 시설의 유입과 유출부에서 수질 및 유량 모니터링을 진행하였으며, 수질오염공정시험법에 준하여 BOD, COD, SS, T-N 및 T-P 항목에 대해 분석을 수행하였다. 모니터링 결과, 국내 비점오염저감시설의 평균 부하량은 SS 250.4 kg/day, BOD 89.2 kg/day, COD 136.2 kg/day, TN 51.4 kg/day, TP 7.1 kg/day 로 분석되었으며, 유출부 의 경우 SS 83.8 kg/day, BOD 37.2 kg/day, COD 51.0 kg/day, TN 15.4 kg/day, TP 2.0 kg/day로 나타났다. 또한, 은 오염물질 유입 및 유출 부하량의 상관관계 분석결과 SS, BOD, COD의 유입 및 유출 부하량의 상관성은 높게 나타났으며 특히 유기물질(BOD, COD)의 상관성은 0.8이상으로 분석되었다(p<0.005). 이는 비점오염저감시설에 적용된 식생, 미생물, 여재 등을 통하여 물리학적 및 생태학적 처리를 통해 저감되기 때문으로 판단된다. 하지만, TN은 인위적 요인과 자연적 요인이 복합적으로 작용으로 배출 특성으로 상관성은 매우 낮은 것으로 분석되었다.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.239-250
• /
• 2023

Disease monitoring was conducted to investigate the recent disease occurrence in Japanese eels (Anguilla japonica). Between May 2021 and March 2022, an investigation was conducted on eels from seven farms experiencing mortality. JEECV (Japanese eel endothelial cells-infecting virus) was detected in all examined farms, each exhibiting co-infections with 1 or 2 bacteria, including Edwardsiella anguillarum, E. piscisida, Aeromonas sp., Citrobacter freundii, Lactococcus garviae, or Vibrio sp. From March 2022 to October 2023, monthly periodic inspections were carried out at a farm in Yeonggwang, Jeollanam-do, for a total of 22 times. JEECV was detected in 10 out of 22 times, even when mortality was not recorded. Bacteria such as E. anguillarum, C. freundii, Aeromonas sp., and Vibrio sp. were isolated, but consistent clinical signs of liver abscess and hemorrhagic lesions were only recognized in fish infected with E. anguillarum. Other bacteria were often isolated from apparently healthy fish. In conclusion, mortality in eel farms frequently occurs due to co-infections of JEECV with bacteria rather than JEECV alone. Therefore, to reduce eel mortality, it is crucial to decrease co-infections, with a particular emphasis of JEECV and E. anguillarum.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.110-113
• /
• 2001

Dielectrometry has been used to monitor the cure of epoxy resin using composite matrix. In this investigation, physical properties of the mixture of epoxy resin(LY564), bisphenol A type, and cycloaliphatic hardener(HY 2954) were observed. Activation energy at maximum tan $\delta$ and gelation point was determined during isothermal scanning. From IonViscosity data, it was found that vitrification peak after gelation was appeared on slow heating rate. It was also measured that the duration time for full cure was necessary and it was about 24 hr at $145^{\circ}C$. Therefore, epoxy resin used in this research is required the extended time for full cure.