• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.29-29
• /
• 1999

낙하추 방식의 저에너지 충격시험기는 일정한 질량을 가진 충격체를 금속재/복합재 구조재에 낙하시켜 줌으로써 인위적인 충격에너지를 금속재/복합재 구조재에 가하여 주는 장치로서 금속재/복합재 구조재의 충격으로 인한 손상 거동과 충격특성을 평가하기 위한 용도로 널리 활용되고 있다.

• Composites Research
• /
• v.36 no.3
• /
• pp.230-240
• /
• 2023

The deployable reflector antenna consists of 24 unit main reflectors, and is mounted on a launch vehicle in a folded state. This satellite reaches the operating orbit and the antenna of satellite is deployed, and performs a mission. The deployable reflector antenna has the advantage of reduce the storage volume of payload of launch vehicle, allowing large space structures to be mounted in the limited storage space of the launch vehicle. In this paper, structural analysis was performed on the main reflector constituting the deployable reflector antenna, and through this, the initial conceptual design was performed. Lightweight composite main reflector was designed by applying a carbon fiber composite and honeycomb core. The laminate pattern and shape were selected as design variables and a design that satisfies the operation conditions was derived. Then, the performance of the lightweight composite reflector antenna was analyzed by performing detailed structural analysis on modal analysis, quasi-static, thermal gradient, and dynamic behavior.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.792-797
• /
• 1996

형상모델링(Geometric Modeling)은 컴퓨터 기술의 발전과 더불어 실제 3차원 물체를 정확하게 표현하려는 형태로발전하였다. 와이어프레임 모델링(Wireframe Modeling) 기술은 3차원 형상을 빠르게 모델링하고 이로 부터 치수 기입이 된 정확한 2차원 도면의 생성을 가능하게 하였다. 그러나, 면을 표현할 수 없기 때문에 모델의 표현이 모호해질 수 있다. 1960년대에 자유곡면의 가공을 위해 개발된 곡면 모델링(Surface Modeling) 기법은 NC 가공과 컴퓨터를 이용한 금형의 제작을 가능하게 했고 와이어프레임 모델링보다는 더 상세하게 모델 을 표현할 수 있게 되었다. 본 연구의 목적은 개방형 구조를 갖는 복합다양체 모델러에서의 불리안 작업을 구현하고 이의 결과를 가시화 하는데 있으며 개략적인 개방형 형상 모델링 시스템 Fig.1과 같다

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.155-168
• /
• 1997

Lattice girder is a new steel support developed in Europe for the replacement of an existing H-shaped steel set, which is installed after tunnel excavation. Lattice girder has the following several advantages : 1. Lattice girder minimizes the amount of shotcrete shadow which happens to occur behind a steel support. 2. A triangular shape of lattice girder makes shotcrete placed efficiently. 3. Lattice girder provides a good bond strength for shotcrete, which makes the composite structure of lattice girder and shotcrete behave monolithic, and therefore, the rock load can be supported effectively by the lattice girder system, This paper presents the results from a model wall test, a strength test for shotcrete shot on the model wall and a strength test for the bond between lattice girder and shotcrete. These tests proved that lattice-girder system is superior to H-shaped steel-set system concerning the shotcrete rebound rate, the developed shotcrete strength and the adhesion characteristics.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.261-265
• /
• 2014

As the need for miniaturization in water purification filter increases, the development of filter media for single filtration with multiple function was strongly required. In this study, the molded activated carbon composed of single unit was manufactured by extrusion-sintering process, and then the flow rate, density and porosity were investigated using the molded activated carbon manufactured at various extrusion temperature. We confirmed that it was possible to manufacture the single unit-molded activated carbon when the extrusion temperature was $140{\sim}230^{\circ}C$ more than $133^{\circ}C$ being of polymer binder melting point, and the optimal extrusion temperature for the molded activated carbon with maximum flow rate was $170^{\circ}C$ since the molded activated carbon had low density and high through porosity. Also we confirmed that the flow rate through the molded activated carbon was strongly dependent upon through pore porosity compared to total porosity for the molded activated carbon.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.15-21
• /
• 2011

It is required to accumulate experimental datum that make the theories easy to general technicians in order to use composite material widely on construction field. Therefore, we intend to present base technologies that evaluate static and fatigue performance according to the FRP deck section and offer the basis datum for FRP deck analyses and the design standards. As results of static tests, it can be shown that specimen with fabric direction has higher rigidity than that with normal to fabric direction and convergence for the datum. Due to this reason, it has more stable behavior by structural characteristics of matrix arrangement during destruction. For the fatigue tests, we found that by increasing the number of test repetition, test specimen with fabric direction had an crack just before the destruction, and the contact surface was detached.

• Composites Research
• /
• v.31 no.4
• /
• pp.161-170
• /
• 2018

Cylindrical composite lattice structures are manufactured by filament winding process. The fiber volume fraction non-uniformity and resin rich layers that can occur in the manufacturing process affect the stiffness and strength of the structure. Through the cross-section examination of the hoop and helical ribs, which are major elements of the composite lattice structure, we observed the fiber volume fraction non-uniformity and resin rich layers. Based on the results of the cross-section examination, the stiffness of the ribs was analyzed through the experimental and theoretical approaches. The results show that the fiber volume fraction non-uniformity and resin rich layers have an obvious influence on the rib stiffness of composite lattice structure.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.142-152
• /
• 2010

In this study, eleven reinforced concrete beams, without stirrup, using high ductile fiber-reinforced mortar with ground granulated blast furnace slag(SHF Series, SHFSC Series) and standard specimens without or with stirrup(SSS, BSS) were constructed and tested under monotonic loading. Experimental programs were carried out to improve and evaluate the shear performance of such test specimens, such as the load-displacement, the failure mode, the maximum strength, and shear strength. All the specimens were modeled in scale-down size. Test results showed that test specimens(SHF Series, SHFSC Series) was increased respectively the shear strength carrying capacity by 26%, 20% and the ductility capacity by 5.27, 5.75 times in comparison with the standard specimen without stirrup(SSS). And the specimens(SHF Series, SHFSC Series) showed enough ductile behavior and stable flexural failure.

• Composites Research
• /
• v.33 no.3
• /
• pp.169-175
• /
• 2020

The compression and tension test were performed to evaluate the stiffnesses of the conical composite lattice structures and results of test were compared with finite element analysis results. Because of difficulty to perform simple tension and compression test due to conical shape, suitable specimens and jig for test were made. Subelements extracted from the structure were prepared for compression test. Compression test of subelement was performed and compressive strains in fiber direction were measured. Compressive stiffness of the helical rib was verified by finite element analysis results. For stiffness of hoop rib, hoop ring specimens were extracted from the structure. Tension test of hoop ring specimen was performed to apply bending deformation to hoop rib. Stiffness of hoop rib was verified by finite element model considering various fiber volume fraction in thickness direction.

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.29-36
• /
• 1992

우리의 경제발전과 함께, 막구조 및 케이블구조를 이용한 특수 대공간 구조물이 더욱 더 늘어날 전망이며, 이들 구조물의 구조해석은 일반적인 범용ㅇ 구조해석 프로그램으로는 해석이 불가능하다. 즉, 대부분의 범용 구조해석 프로그램이 초기강성을 가진 구조물을 해석할 수 있는데 반해, 막구조 및 케이블 구조는 초기강성이 매우 약한 구조체이므로, 초기 불안정현상을 나타내고, 따라서 해석이 불가능하게 된다. 이러한 구조적 특징을 가진 막구조 및 케이블구조를 해석하기 위하여, 막 케이블 및 트러스요소로 구성된 복합구조체를 해석할 수 있는 범용 구조해석 프로그램인 McS(Membrane and Cable/Truss Structures)가 개발되었으며, 그 Flow-chart는 표1에서와 같다. McS는 현재, 한국에서는 성균관대학교 자연과학캠퍼스의 VAX-11, 1명진단조공업주식회사의 SUN 워크스테이션에서 작동중이며, 일본에서는 동경대학 생산기술연구소의 M-380 및 T.I.S. & Partners의 IBM 워크스테이션에서 작동중에 있다.