• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.165-167
• /
• 2019

본 연구에서는 한국형 e-Navigation 선내시스템 원격 모니터링 서비스(SV20) 중 복원성 및 화재 판정 모듈의 개발과 운용개념에 대해서 소개하였다. 구체적으로는 선박의 복원성(안정성)과 관련된 메타센터 높이(GM), 복원성지수, 운동성지수 그리고 선체-파랑 동조위험성의 산출 및 표출에 대한 방안과 선내 화재정보의 표출 방안을 설명하고, 개발 진행사항 그리고 향후 연구 등을 기술하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.158-161
• /
• 2019

한국형 e-Navigation의 선내시스템원격모니터링시스템(SV20)은 선박의 이상 상태와 긴급 상황을 자동으로 감지하고 위기상황을 신속히 극복하는데 필요한 위기대응 가이던스를 제공하는 것을 목적으로 개발된 시스템이다. 선내시스템에서는 육상의 기상정보와 선박의 실시간 해상정보 등을 바탕으로 선박의 실시간 복원성 정보를 제공하고, 항해 주요장비의 상태정보와 화제정보를 알람과 가이던스로 제공된다. 이들 선박에 설치된 선내시스템 정보는 LTE-M 통신기반의 MCP를 통해 전송되어 육상의 선박모니터링시스템에 동기화 되어 표출된다. 본 연구에서는 선내시스템 원격모니터링 시스템의 표준화 모델과 적용사례 및 연구개발 현황을 소개하고자 한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.33
• /
• pp.32-52
• /
• 2012

선박의 경사시험에 사용되는 수동식 계측기기는 측정 자체가 사람의 관능에 의존하기 때문에 현장계측자 개인의 경험에 따라 측정 데이타의 신뢰도에 편차가 발생할 개연성이 높다. 그러나 경험치에 의존하지 않고 경사시험의 신뢰성을 담보할 측정방법의 개선이나 개발은 현재까지 없었다. 경사시험 시 정밀한 계측센서를 이용하여 경사각을 계측한다면, 선박의 복원성판정에 정확성을 기할 수 있을 것이다. 따라서 본 연구에서는 전자식 자이로 센서가 내장된 스마트폰(태블릿 PC)을 이용하여 선박의 경사각을 계측하고, 아울러 그에 따른 선박의 경하 상태의 배수량 및 중량중심을 자동으로 계산할 수 있는 앱을 개발하여 선박 복원성판정의 유효성을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.669-676
• /
• 2001

본 논문은 DCT 기반의 블라인드 워터마킹 방법에 관한 연구 결과이다. 본 논문에서 사용한 4096비트의 워터마크는 512x512 영상이 수용할 수 있는 최대 용량의 절반에 해당한다. 각 워터마크 비트는 8x8 DCT 블록의 12개의 계수에 확산 패턴을 이용하여 삽입하였다. 워터마크 삽입 과정에서, 워터마크 이득 계수는 비가시성과 견고성을 고려하여 최적화되었다. 워터마크 검출 과정에서는, 상관검출을 통하여 워터마크에 대한 예비판정을 하며, 이진가설 검증의 검증 과정을 통해서 예비판정에서의 검출 오류를 수정하였다. 검증 과정에서는 복원된 DCT계수를 이용한 가중치가 사용되었으며, 대부분의 예비 판정의 오류는 검증 과정에서 수정이 되었다. 실험 결과, 영상에 공격이 가해지지 않은 경우는 최종 검증 후에 BER이 0.5% 미만으로 낮아졌으며, 20% JPEG의 고압축에서도 BER이 9% 미만으로 산출되었다. 기존의 방법들과의 비교에서, 제안한 방법은 워터마크 검출 성능 및 워터마크 용량 측면에서 우수하였다.

• Journal of Applied Reliability
• /
• v.5 no.1
• /
• pp.167-180
• /
• 2005

Design of a degradation test without replacement is considered based on tightened critical value to reduce the evaluation testing time. The sample size, number of inspections, and the critical values are determined to assure the same probability of acceptance when the testing time is reduced to some degree. Photo-diode balance of an optical pickup is analyzed as a case study.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.503-509
• /
• 2006

To determine the minimum area for conservation of four Halophytic species populations, we evaluate the genetic diversity of four species based on the AFLP method using thirteen primer sets. Four species populations, Phragmites communis Trin, Suaeda japonica Makino, Zoysia sinica Hance, and S. maritima (L.) Dumort, from the southwestern coast of Korea, were selected for this study. The genetic diversity index ($\Psi_{ST}$) of Phragmites communis was 0.3856, Suaeda japonica 0.1445, Suaeda maritima 0.1669, and Zoysia sinica 0.2422. Based on the genetic diversity of population, we could determine the minimum area for conservation of each species as follows. P. communis needs $500{\times}500m^2$, S. japonica, S. maritima, and Z. sinica $100\times100m^2$ for keeping their genetic identity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.295-302
• /
• 2018

Face recognition (FR) has been widely used in various applications, such as smart surveillance systems, immigration control in airports, user authentication in smart devices, and so on. FR in well-controlled conditions has been extensively studied and is relatively mature. However, in unconstrained conditions, FR performance could degrade due to undesired characteristics of the input face image (such as irregular facial pose variations). To overcome this problem, this paper proposes a new method for determining if an input image is suitable for FR. In the proposed method, for an input face image, reconstruction error is computed by using a predefined set of reference face images. Then, suitability can be determined by comparing the reconstruction error with a threshold value. In order to reduce the effect of illumination changes on the determination of suitability, a preprocessing algorithm is applied to the input and reference face images before the reconstruction. Experimental results show that the proposed method is able to accurately discriminate non-frontal and/or incorrectly aligned face images from correctly aligned frontal face images. In addition, only 3 ms is required to process a face image of $64{\times}64$ pixels, which further demonstrates the efficiency of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.15-20
• /
• 2016

The existing multiple modulus-based self-recovering equalization type has not been applied to initial equalization. Instead, it was used for steady-state performance improvement. In this paper, for the self-recovering equalization type that considers the multiple modulus as a desired response, the initial convergence performance was improved by extending the dynamics of the errors using error boosting and their characteristics were analyzed. Error boosting in the proposed method was carried out in proportion to a symbol decision for the equalizer output. Furthermore, having the initial convergence capability by extending the dynamics of errors, it showed excellent performance in the initial convergence rate and steady-state error level. In particular, the proposed method can be applied to the entire process of equalization through a single algorithm; the existing methods of switching over or the selection of other operation modes, such as concurrent operating with other algorithms, are not necessary. The usefulness of the proposed method was verified by simulations performed under the channel conditions with multipath propagation and additional noise, and for performance analysis of self-recovering equalization for high-order signal constellations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.45-55
• /
• 1999

The majority of fishing vessels(under 20 tonnages) in Korea have a high casualty accident of the flood and capsizing occurred by lack of stability. Actually, it is so difficult to make out the data of inclining and stability tests of small fishing vessels after building, because most of them were built on experiences of manufacturer. According to above reasons, the aim of this study is an attempt to propose a stability criteria of small fishing vessels as follows: Firstly, it is examined that the stability is driven from a transverse metacenter height of actual ships, which is able to obtain a basic drawing and stability data. Secondly, it is examined the heeling at high-speed turning, and the period of rolling according to B/D(breadth/depth). Finally, it is suggested the stability criteria by using a dynamic state which is applied in passenger boat and fishing vessels over 24 meters.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.10
• /
• pp.377-382
• /
• 2018

This study deals with internal state and tissue density analysis methods for red ginseng grade determination. For internal measurement of red ginseng, there have been various studies on nondestructive testing methods since the 1990s, It was difficult to grasp the most important inner hole and inside whites in the grading. So in this study, we developed a closed capturing device for infra-red illumination environment, and developed an internal measurement system that can detect the presence and diameter of inner hole and inside whites. Made devices consisted of infrared lights with a high transmission rate of red ginseng in 920 nanometer wave band, a infra-red camera and a Y axis actuator with a red ginseng automatically controlled focus on the camera. The proposed algorithm performs an auto-focus system on the Y-axis actuator to automatically adjust the sharp focus of the object according to the size and thickness. Then red ginseng is rotated $360^{\circ}$ at $1^{\circ}$ intervals and 360 total images are acquired, and reconstructed as a sinogram through Radon transform and Back-projection algorithm was performed to acquire internal images of red ginseng. As a result of the algorithm, it was possible to acquire internal cross-sectional image regardless of the thickness and shape of red ginseng. In the future, if more than 10,000 different shapes and sizes of red ginseng internal cross-sectional image are acquired and the classification criterion is applied, it can be used as a reliable automated ginseng grade automatic measurement method.