• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.367-370
• /
• 2001

본 논문에서는 영상 합성을 위해 실시간으로 움직임 물체를 추출하고 움직임 물체의 홀이나 외곽선의 손실을 최소화하고 복원하는 알고리즘을 제안한다. 움직임은 기준영상과 현재 입력된 영상의 차이를 계산함으로써 검출 된다. 따라서 여기서 적당한 기준 영상과 검출 문턱치 방법의 선택이 필요하게 된다. 몇 가지 문턱치 선택 방법들이 연구되었나, 본 논문에서는 회귀적인 문턱치들을 이용한다. 그레이 영상을 통해 구해진 영역에서 칼라 값의 비교를 통해 손실된 영역을 복구하고 최종 실루엣 영상을 얻는다. 얻어진 움직임 물체의 실루엣 영상은 영상 합성에 이용한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.3B
• /
• pp.280-287
• /
• 2001

본 논문에서는 기존의 LCD MW를 이용한 각 다중화 시스템에서 인접한 수직방향 MW 사이의 crosstalk를 제거하기 위하여 MW의 뒷단에 수직방향으로 주기적으로 서로 다른 초점 길이를 갖는 이중초점 렌즈를 삽입하여 인접한 MW의 기준빔이 서로 다른 공간에 기록되게 함으로써 기준빔의 전자적 제어뿐만 아니라 고밀도의 정보저장 및 복원이 가능한 새로운 공간-각 다중화 기법을 제안하고 이에 대한 광학 실험을 통해 구현가능성을 제시하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.641-643
• /
• 2010

하천 이용에 대한 관심이 고조되고 하천개발 관련 계획이 활발하게 진행되어짐에 따라 이용에 대한 요구와 자연환경보전 필요간의 조정이 필요하게 되었다. 이러한 갈등은 특히 도심지역에서 심화되어짐에 따라 도시하천에서의 이용, 보전, 복원, 관리의 효율성 및 하천어메니티 도입을 고려한 도시하천 이용 및 관리 기준으로서 하천유형화 기준을 제시하였고, 특히 이용에 대한 직접적인 요구도를 반영하는 지표로서 이용지수를 개발하였다. 개발된 이용지수는 설문조사를 통한 전문가의견수렴과 AHP분석을 통해 검증하였다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.146-147
• /
• 2003

우리나라에서의 환경 오염 관리는 BOD, COD를 비롯한 총 20여가지 항목에 대한 이화학적 분석에 기초를 두고 있기때문에 분석 항목에 포함되지 않는 물질에 의한 독성의 영향은 간과되고 있다. 선진국에서는 이러한 한계점을 극복하기 위해 이화학적 분석기법 이외에 생물검정법을 이용하여 유해화학물질에 대한 독성 판별, 수질환경기준, 퇴적물환경기준, 오염진단과 생태계위해도 평가, 오염정화와 환경복원 등에 활용하고 있다. (중략)

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.87-94
• /
• 2012

This study was focused on digital restoration and surface depth modeling applying the three-dimensional laser scanning system of the Haeundae Stone Inscription. Firstly, the three-dimensional digital restoration carried out acquiring of point cloud using wide range and precision scanner, thereafter registering, merging, filtering, polygon mesh and surveyed map drawing. In particular, stroke of letters, inscribed depth and definition appearing the precision scanning polygon was outstanding compared with ones of the wide range polygon. The surface depth modeling completed through separation from polygon, establishment of datum axis, selection of datum point, contour mapping and polygon merging. Also, relative inscribed depth (5~17mm) and outline by the depth modeling was well-defined compared with photograph and polygon image of the inscription stone. The digital restoration technology merging wide range and precision scanning restored the total and detailed shape of the Stone Inscription quickly and accurately. In addition, the surface depth modeling visibly showed unclear parts from naked eye and photograph. In the future, various deteriorations and surrounding environment change of the Stone Inscription will be numerically analyze by periodic monitoring.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4152-4158
• /
• 2012

The Stereo X-ray inspection system is designed for effectively providing the additional information of objects than the conventional inspection system that offers only 2D cross-section of objects. We studied the geometric improvement of the stereo X-ray inspection system, the stereo matching algorithm of the single object using the edge and the volume reconstruction method for the inspected object. In this paper, we conduct a matching algorithm to find the correspondences between the images and reconstruct 3-D shapes of real objects using the stereo X-ray images. Also, we apply a new 3D reconstruction algorithm for the discrimination of two objects. For the separation of the overlapping objects, we calculate the vector of the object and divide inner and outer voxel of objects. And for the elimination of the overlapping area, we study the reconstruct 3D shapes using the threshold based Z-axis. The experimental results show that the proposed technique can enhance the accuracy of stereo matching and give more efficient visualization for overlap objects in the restricted environment.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.303-315
• /
• 2007

This paper proposes a 3D structure recovery and registration method that uses four or more common points. For each frame of a given video, a partial structure is recovered using tracked points. The 3D coordinates, camera positions and camera directions are computed at once by our improved scaled orthographic factorization method. The partially recovered point sets are parts of a whole model. A registration of point sets makes the complete shape. The recovered subsets are integrated by transforming each coordinate system of the local point subset into a common basis coordinate system. The process of shape recovery and integration is performed uniformly and linearly without any nonlinear iterative process and without loss of accuracy. The execution time for the integration is significantly reduced relative to the conventional ICP method. Due to the fast recovery and registration framework, our shape recovery scheme is applicable to various interactive video applications. The processing time per frame is under 0.01 seconds in most cases and the integration error is under 0.1mm on average.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.29-36
• /
• 2011

The remediation efficiency of the contaminant through laboratory experiment of the pilot scale was evaluated for the influence factors in the contaminated soils for the applicability of the prefabricated vertical drain system. It was performed numerical analysis by the method that the finite element and finite differences based on the drawn result about the remediation of contaminated soils. The parametric analysis for the applied parameter value was performed. In the pilot scale remediation experiment, as a result of evaluating with the minimum limit concentration ratio, in the case of dense and loose conditon, the remediation time was much longer. And the remediation efficiency was rapidly progressed as the time was elapsed. It was analyzed that the contaminant concentration is reduced around the extraction well as the contamination remediating rate by numerical analysis result as the time was elapsed.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.207-217
• /
• 2009

After replicating 10 bronze types such as Gyemija, Gyeongjaja, Eulhaeja, etc. before the Imjin war, we studied the change of microstructure from each casting process, method, and alloy ratio by Gyechukja replicated from "Donggukyeojiseungnam". We selected the average of compositions of Eulhaeja in the National Museum of Korea as the standard(Cu 86.7%, Sn: 9.7%, Pb: 2.3%) of bronze types, so we decided on the alloy's composition of Cu 87%, Sn 15%, Pb 8% added to 5% Sn and Pb contents because of evaporating the Sn and the Pb. Before replicating major metal types, we made master-alloy first, melting it again, and then replicated metal types. The composition of the 1'st replicated Gyechukja showed the range of Cu 85.81~87.63%, Sn 9.27~10.51%, Pb 3.05~3.19%. The 2'nd replicated Gyechukja made using the branch metal left after casting the 1st replica. The 2nd replicated Gyechukja showed the composition range of Cu 87.21~88.09%, Sn 9.06~9.36%, Pb 2.80~3.05%. This result decreases a little contents of Sn and Pb as compared with metal types of the 1st replica. However, it's almost the same as the Eulhaeja's average composition ratio in the National Museum of Korea. As a result of observing the microstructure of restored Gyechukja, it showed the dendrite structure of the typical casting structure and the segregation of Pb. There is no big difference of microstructure between the 1st and the 2nd restored metal types, even though the 2nd restored types partially decreases the eutectoid region in comparison with the 1st types. The systematic and scientific restoration experiment of metal types using Joseon period will be showed the casting method and alloy ratio, and this will be of great help to the study of restoration metal types in the future.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.6
• /
• pp.31-36
• /
• 1997

다중모드 광섬유에서 나오는 빛을 기준파로 하여 체적홀로그램을 기록하고, 이것을 전압인가에 의해 압력이 가해지는 광섬유의 스펙클 패턴으로 복원할 때 측정된 빛의 세기를 통해 PZT에 인가된 전압의 크기를 측정할 수 있는 방법을 제시하고 실험을 통해 입증하였다.