• New & Renewable Energy
• /
• v.6 no.3
• /
• pp.22-29
• /
• 2010

The concept of Ocean Thermal Energy Conversion (OTEC) is simple and various types of OTEC have been proposed and tried. However the location of OTEC is limited because OTEC requires $20^{\circ}C$ of temperature difference as a minimum, so most of OTEC plants were constructed and experimented in tropical oceans. To solve this we proposed the modified OTEC which uses condenser discharged thermal energy of existing fossil or nuclear power plants. We call this system CTEC (Condenser Thermal Energy Conversion) as this system directly uses $32^{\circ}C$ partially saturated steam in condenser instead of $20{\sim}25^{\circ}C$ surface sea water as heat source. Increased temperature difference can improve thermal efficiency of Rankine cycle, but CTEC should be located near existing plant condenser and the length of cold water pipe between CTEC and deep cold sea water also increase. So friction loss also increases. Calculated result shows the change of efficiency, pumping power, net power and other parameters of modeled 7.9 MW CTEC at given condition. The calculated efficiency of CTEC is little larger than that of typical OTEC as expected. By proper location and optimization, CTEC could be considered another competitive renewable energy system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.140-148
• /
• 1994

In this paepr, the modified neocognitron, which has capability of recognizing multi-patterns in input image in one pass, is proposed. It is the hierarchical neural network composed of S and V layer which are able to extract features and of C layer with little effect from deformation, changes in size, shifts in position. S and V cells extract the features of all patterns in input image by applying DCC(don't care condition) to those cells. S and C cells also have position informations of extracted patterns. Position information is used in extracting good features without extracted features beting interfered one another. The proposed method is shorter in recognition time than the selective attention method with backward connection, because of recognizing multi-patterns in one passe. The modified neocognitron can recognizze attached multi-patterns because of using DCC and position informations.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.131-142
• /
• 2014

Phone camera lens module is assembled with a barrel, multiple lenses, multiple spacers and a shield. The major processes of manufacturing system are injection molding, coating and assembly processes, and each process has multiple machines. In this paper, we introduce a scheduler based on simulation model which can be used for frequent rescheduling problem caused by urgent orders, breaking down of molds and failures of machines. The scheduling algorithm uses heuristic Backward-Forward method, and the objective is to minimize the number of tardy orders.

• Journal of the Korean Society for information Management
• /
• v.21 no.3
• /
• pp.289-303
• /
• 2004

This experimental study proposes a multi-document summarization method that produces optimal summaries in which users can find answers to their queries. In order to identify the most effective method for this purpose, the performance of the three summarization methods were compared. The investigated methods are sentence clustering, passage extraction through spreading activation, and clustering-passage extraction hybrid methods. The effectiveness of each summarizing method was evaluated by two criteria used to measure the accuracy and the redundancy of a summary. The passage extraction method using the sequential bnb search algorithm proved to be most effective in summarizing multiple documents with regard to summarization precision. This study proposes the passage extraction method as the optimal multi-document summarization method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.176-176
• /
• 2012

다수 홀 전극을 이용한 RF Capcitively Coupled Plasma는, 평판 전극을 이용할 때에 비해, 전자 밀도를 향상시키는 것으로 알려져 있다. 이와 같은 전자 밀도의 증가는 일반적으로 공정의 속도를 증가시키며, 박막 태양전지의 Microcrystalline Silicon 증착 공정등 공정의 속도가 중요시되는 공정에서는 공정속도를 향상 시키는 것이 중요한 공정의 요구사항으로, 이와 같은 방법으로 전자 밀도를 향상시켜 공정의 속도를 향상시키는 연구가 진행되어 왔다. 그러나 공정에 사용하는 RF 전력의 파장의 유한성으로 인해, 공정의 면적을 증가시킬 경우, 방전의 균일도가 하락하게 되며 넓은 면적에 일정한 공정이 이루어지지 않게 되어 공정의 품질이 하락하게 된다. 이러한 문제에 대한 해결책의 하나로 본 발표에서는 다중 Multi-hole 전극을 이용한 방전을 제시하고자 한다. 다중 Multi-hole 전극은, 복수의 구획으로 나뉘어진 다수의 홀이 있는 전극으로 각각의 구획은 분리되어, 각 구획 별로 서로 다른 복수의 홀이 10 mm 깊이로 뚫린 전극 구획으로 나누어지며, 각 구획을 결합하여 하나의 전극을 이루도록 한 전극이며 이를 이용하여 위치 별 플라즈마 밀도를 제어하고자 하는 목적으로 설계되어진 전극 구조이다. 본 학회에서 발표하는 실험에서는 가장 단순한 형태인, 두 개의 구획으로 나뉘어진 전극을 이용하여 내부와 외부에, 평 전극 구획 혹은 5 mm 지름의 다수 홀이 존재하는 전극 구획을 조합하여 다양한 전극 구조를 만들었으며 이를 통해, 다중 Multi-hole 전극을 이용하는 위치 별 플라즈마 밀도의 제어 방법의 가능성을 확인하고자 하였다. 위치 별 플라즈마 밀도의 측정을 위해, 전극에 대해 수평하게 이동하는 RF compensated Single Langmuir Probe를 이용하여, 전자 밀도를 측정하였으며 50 mTorr의 낮은 압력 범위 및 500 mTorr의 높은 압력 범위에서 위치 별 플라즈마 밀도를 측정하여, 압력에 따라 달라지는 홀 방전의 특성을 이용하고자 하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.75-86
• /
• 1996

A fatigue life prediction program for multiple planar surface cracks in finite plates and T-fillet joints, based on linear elastic fracture mechanics was developed. This prediction technique include the crack coalescence, mutual interation and the stress intensity concentration effect in welded joints. Total of 44 cases were compared with lida's and Vosikovsky's experimental results and it was found that the present method was a reasonable tool for the predictioin of fatigue life.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.377-382
• /
• 2007

Several prospecting methods have been used to detect deep seated small tunnel in Korea. Tunnel interpretation of seismic method has been performed mainly by wave traveltime inversion method. But it often gives inacurate solution for the exact tunnel position because of the short distance between two measuring boreholes and picking errors of first arrivals. In this study, "error tomogram" was proposed to detect tunnel position and applied to theoretical and field dat using multi-source amplitude data.

• Communications of Mathematical Education
• /
• v.22 no.4
• /
• pp.515-531
• /
• 2008

The visual cryptography scheme is a simple method which can be decoded directly the secret information in human visual system without performing any cryptographic computations. For some secret of image type, we scatter them to random n images and if any threshold (or more) of them are stacked together then original image is visible. In this paper we consider (2,n) visual cryptography scheme and show a construction method of the sample matrix using the rule of binomial coefficients $_nC_2$. This scheme can contribute interesting and effectiveness to the study of mathematics.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

This paper presents a method to design a repetitive controller that is robust to variations in the system parameters. The uncertain parameters are specified probabilistically by their probability distribution functions. Instead of working with the distribution functions directly, the repetitive controller is designed from a set of models that are generated from the specified probability functions. With this multiple-model design approach, any number of uncertain parameters that follow any type of distribution functions can be treated. furthermore, the controller is derived by minimizing a frequency-domain based cost function that produces monotonic convergence of the tracking error as a function of repetition number. Numerical illustrations show how the proposed multiple-model design method produces a repetitive controller that is significantly more robust than an optimal repetitive controller designed from a single nominal model of the system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.556-556
• /
• 2016

도시화 및 산업화에 따른 유출량의 증가 및 도달시간의 감소로 인해 도시지역의 침수피해가 빈번하게 발생되고 있는 실정이다. 내수침수피해 방지를 위해 유역내 우수관거 용량향상 및 우수유 출저감시설의 설치 등과 같은 유역전반의 홍수방어 체계를 구축하고자 하는 노력들이 이루어지고 있으나, 국내 대도시의 경우 저류시설 설치를 위한 부지 확보 및 우수관거 교체를 위한 예산확보가 어려운 실정이다. 따라서 도시화, 산업화, 인구집중으로 동일규모의 강우에서도 우수유출이 증대되고 있는 도시지역에서 원활한 내수배제를 위해 우수관거를 연계한 간선저류지 개념을 적용하여 우수유출저감효과를 분석할 필요가 있다. 본 연구에서는 간선저류지를 유역내의 임의의 위치에 설치하여 단일 저류지와 복수 저류지에 대해 각각 우수유출저감효과를 분석하였다. 간선저류지 설치로 인한 우수유출저감효과 분석을 위하여 단일 저류지의 면적은 $1,000m^3$, $2,000m^3$, $3,000m^3$ 등 3가지 크기로 설정하여 분석을 수행하였다. 단일 저류지의 위치에 따른 유출저감효과를 분석하기 위해 저류지의 위치는 전체 유역면적에 대한 저류지 상류부 면적의 비를 20%, 40%, 60%, 80%로 변화시키면서 분석을 수행하였으며, 복수 저류지의 경우 전체 유역면적에 대한 저류지 상류부 면적의 비를 다양하게 적용하여 분석을 수행하여, 단일 저류지 및 복수 저류지 설치 위치에 따른 도시유역의 우수유출저감효과를 분석하였다.