• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.625-630
• /
• 2009

In this paper, we introduce the analysis and counter-measure of signal distortion of search radar equipped on the ship. Using ShipEDF program, the search radar's main antenna and ship structures are modeled in the view of electromagnetism. Ray tracing method is used for analysis of the search radar's radiation patterns in free space and ship condition. From analyzed radiation patterns, we can conclude that the search radar's signal distortion is due to radiation pattern distortion. We also analyze the surface current distribution of the mast to propose the counter-measure to reduce electro-magnetic field reflection of mast.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.393-398
• /
• 1991

An experimental reactor system was devised and employed to examine catalytic coal gasification. A 4-kw tungsten halogen lamp heater combinded with a graphite sample basket coated with silicon nitride film made rapid heating and cooling possible. Also a small graphite cap on the thermocouple tip which located just beneath the sample basket helped remarkably to read real temperatures. Silicon nitride film on the basket and the cap showed very good protection against the reaction between graphite and oxidant gases during the experiments. The weight of specimen could be continuously measured without disturbance.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.183-186
• /
• 2011

모든 공동주택에 적용되고 있는 기존의 피난시설은 고층부분에서 사용의 제한, 세대 간 보안 및 사용자의 제약 등으로 실제 현장에 적용하여 사용하는 되는 많은 문제점을 내포하고 있다. 또한, 이와 관련하여 공동주택의 용도 특성상 조기 피난이 이루어지지 못하는 경우가 빈번하여 화재 때문에 세대 내 출구가 폐쇄되고 재해약자가 사용하는데 어려우며, 화염과 복사열로부터 안전을 해결하기에는 현재 공동주택에서 보편적으로 설치되어있는 완강기로 이러한 문제를 해결하기에는 매우 미흡한 실정이다. 이에 본 연구에서는 이러한 문제점을 해결할 피난방법이 적용된 피난시설을 제안하고자 한다. "피난대피시설"은 공동주택 발코니 또는 외벽에 콤팩트(compact)하게 접혀 있다가 화재 시 수동 또는 감지기와 연동해 쉽게 작동되어 대피공간 용도와 유사시 자력으로 피난층까지 피난할 수 있는 구조이다. 또한, 화재실과 접하는 부분은 $1,200^{\circ}C$의 복사열을 차단할 수 있는 단열소재로 구성되며 1차적으로는 화재 장소에서 외부 공간으로 일탈한 후에 2차적으로 아래층으로 사다리를 이용하여 피난할 수 있게 되어 있다. 본 연구개발의 주안점은 화재 시화염과 복사열로부터 공간 일탈을 하여 재실자를 보호할 수 있는 대피공간의 개념과 피난시설에서 피난층으로 피난할 수 있는 적극적인 피난방법을 접목한 것이 피난시설 개발의 핵심이다.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.39-44
• /
• 2010

The cone calorimeter method which is currently used to measure the heat release rate has a fixed rate of radiation. However, in the real fire, when flame combustible material burns, it releases the identical heat flux. We measured the changes of temperature of a fire using FDS in order to analyze flexible heat flux of combustion characteristics. In this study, the rate of radiation of cone calorimeter was adopted by using FDS. Follow those results, it produce between the rate of radiation in the growth period and decline period have a significant impact on heat release rate of PMMA.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1057-1066
• /
• 2001

This paper describes a design for linear polarization antenna using the EMCD (electromagnetically coupled dipole). The analysis and the design of model antennas are conducted by FDTD method. Vertical and horizontal linear polarizations are easily obtained by variation of dipole position. In 1-element antenna design, mutual coupling between microstrip feed line and radiator is considered. Design parameters of each 1-element antenna with vertical and horizontal polarization are used for array design. Radiation power and main beam tilting angle can be controlled by the offset and the distance between radiating elements in an array, respectively. 5-element array antennas are fabricated and measured to prove the design validity. The results of FDTD simulation and measurement show the reasonable agreement.

• Fire Science and Engineering
• /
• v.8 no.1
• /
• pp.9-20
• /
• 1994

To understand the phenomena of laminar diffusion flame along vortical walt, the numerical analysis has been performed. Keller-box method was used to solve the problem in the boundary layer. The governing equation is simplified by thin-flame approxiamtion. And energy and chemical species equations are normalized with Schvab-Zeldovich variables. A physical domain is divided the boundary layer along streamwise coordinate as the combustion region and the propagation region. And Radiation model is concerned in these region. As a result, typical phenomena have been observed. Comparison of the numerical results with experimental data shows that the present method can successfully predict phenomena of laminar diffusion flame along upright surface.

• 전기의세계
• /
• v.33 no.10
• /
• pp.625-630
• /
• 1984

압전변압기는 압전효과를 응용한 점화소자와 필터의 중간적인 존재로서 그 두 기능을 합친 것과 같은 특성을 가지며, 전기적 에너지가 기계적 에너지로 변환된 후 다시 전기적 에너지로 환원되는 과정을 통하여 고전압을 얻는 변압기이다. 이러한 변압기는 자속을 응용하는 일반적인 변압기와는 달리, 유전체인 압전세라믹소자의 압전현상과 공진현상을 응용하므로 주파수대역이 좁고 취급되는 전류가 적다는 단점이 있으나, 구조가 간단하고, 제작이 용이하며, 소형이고, 손실이 적은 장점들이 있어서 특히 고전압고전류원을 필요로하는 음극선관, 음이온발생기, 집진기, 전자복사기, 도장기 등에 이용되고 있으며, 최근에는 다른 분야에도 응용이 시도되고 있다. 여기서는 기존의 압전변압기 중에서 가장 많이 쓰이고 있는 Rosen형(또는 transverse형)압전변압기의 구조와 특성들을 간단히 기술하고, 새로운 형태인 적층형 압전변압기에 관하여 소개하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2009

In this paper, a TRS band(Trunked Radio System: $806{\sim}866\;MHz$) array antenna has a good front-to-back ratio characteristics for the mobile communication base station is proposed. The proposed array antenna is composed of the $5{\times}3$ radiated elements which are the microstrip dipole antennas with the cavity-backed reflector. For the validity of the proposed antenna, the $5{\times}3$ array antenna is designed, fabricated, and its radiation characteristics are measured. As a result of measurements, the antenna gain is over 13.3 dBi and the front-to-back ratio is over 40 dB at the useable frequency band. We confirm that the designed antenna can be used as the mobile communication base station antenna with the excellent back lobe characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.515-522
• /
• 2008

In this paper, a slot antenna with built-in Bazooka balun aimed for a WiBro repeater was designed and fabricated. The return loss and radiation pattern of the slot antenna were improved due to the introduced Bazooka balun. This balun brings about even radiation pattern and keeps the stabilized coverage of repeater And it is easy to unite this balun with the antenna body by providing the terminal of Bazooka balun with screw shape. H-type slot was used to reduce the size of the antenna, and the slot antenna was fabricated in the structural symmetry with respect to a feeding point to afford the omni-directional radiation pattern. The simulated results were obtained by MWS(Microwave Studio Simulator) of CST company, and the measurement on the proposed antenna was conducted in an anechoic chamber equipped with a network analyzer and a far field measurement system. The measured peak gain shows 5.75 dBi and the average gain is above -0.8 dBi. The return loss remains below -12.35 dB for all frequency bands in WiBro regarded as a good performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.103-108
• /
• 2023

In this paper, a performance enhancement study of an AESA antenna that can be applied to a seeker that serves as the eye of a missile was conducted, and the performance of the antenna was verified through actual measurement. When designing an AESA antenna, the optimization of the active reflection coefficient must be considered during transmission due to the mutual coupling between radiators that inevitably occurs, and the selection of a radiator that can overcome the space limitation of the seeker with a small size/light weight is an important design consideration. Accordingly, optimization in terms of electrical performance and low-profile structure is required through research on array antennas for application to the AESA structure. The radiator designed and measured in this paper was designed as an SFN that can satisfy the low-profile structure while enhancing the performance of a general vivaldi antenna. Through this paper, it was confirmed that SFN has the same broadband characteristics as general vivaldi antennas and has optimized characteristics required for AESA antennas. The structure optimized through simulation confirmed the pattern characteristics and active reflection coefficient characteristics through the fabrication of actual proto-type antennas.