• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.574-584
• /
• 2017

In this paper, the optimizing path finding control method is studied for a Legged-robot. It's named TITAN-VIII. It has a lot of advantages over the wheeled robot in the ability to walk freely on an irregular ground. However, the moving speed on the ground of the Legged-robot is slower than the Wheeled-robot's. Consequently, the purpose of the method is presented in this paper to minimize its time when it walks to a goal. It find the path, our approach is based on an algorithm which is called Dijkstra's algorithm. In the rest of paper, the various posture of the robot is discussed to keep the robot always in the statically stable. Based on above works, the math formulas are presented to determine the joint angles of the robot. After that an algorithm is designed to find and keep robot on the desired trajectory. Experimental results of the proposed method are demonstrated in the last of paper.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.543-554
• /
• 1995

This paper describes the improvement of driving stability and the control system for INMEL-VII which is motorized manual wheelchair to satisfy requirements of the disabled The INMEL-VI was based on high maneuverability of the omnidirection drive and safety But the results of field tests about two years showed some problems to the disabled in daily life such as driving stability, Pm switching noise, and rotation of motor without driving command on negative slope. To solve the problems due to an increased DC motor power and applied to direct connection method in INMEL- VII. It improved the driving circuits and set switching frequency to 5KHz to eliminate the switching noise caused by PWM control of DC motor, As compare with the INMEL-VI, INMEL-VII is improved in driving stability by transfer the weight center to forward. The results of field testing proved the improvement of the driving stability and software algorithm It has been estimated to have a hlgh practical use for powered walking aids to the disabled's daily life.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.2
• /
• pp.9-14
• /
• 2012

In this study, an advanced knee joint for active prosthesis leg driven by a linear actuator is suggested. The structure of knee joints of existing active prosthesis legs consists of three links. This kind of linkage requires large torque to drive the active prosthesis legs. Thus a new linkage structure is suggested to solve such problem in this paper. Motion characteristics of the suggested linkage are examined in the simulation. The motion simulation results show that the proposed linkage is able to imitate human gait cycles with the half of linear actuator speed in existing linkages.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.5
• /
• pp.25-30
• /
• 2017

In this Paper, we Propose the Low-cost Obstacle Recognition System Utilizing the Ultrasonic Sensor. Developed Obstacle Recognition System can be used to Aid the Visually Impaired Person. The Existence of the Obstacle is Notified to the Person through the Embodied Electronic Vibration Motor. The Timing Difference from the Recognition to the Notification Indicates the Distance to the Obstacle. Pulsed Ultrasonic Signal Controlled by MCU is Utilized and the Reflected Pulse through the Obstacle gives the Developed System the Existence of the Obstacle and the Distance to the Object. Pulse is sent Repetitively to Improve the Detection Accuracy. Developed Apparatus gives 30 Degree of Detection Angle and 2cm-30cm of the Detection Range when the Apparatus is Tested under Normal Walking Environment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.238-243
• /
• 2002

This paper presents a design and a control of a biped walking AGO-robot and dynamic walking simulation for this system. The biped walking RGO-robot is distinguished from other one by which has a very light-weight and a new RGO type with servo motors. The gait of a biped walking AGO-robot depends on the constrains of mechanical kinematics and initial posture. The stability of dynamic walking is investigated by ZMP(Zero Moment Point) of the biped walking AGO-robot. It is designed according to a human wear type and is able to accomodate itself to human environments. The joints of each leg are adopted with a good kinematic characteristics. To test of the analysis of joint kinematic properties, we did the strain stress analysis of dynamic PLS and the study of FEM with a dynamic PLS. It will be expect that the spinal cord injury patients are able to train effectively with a biped walking RGO-robot.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.585-590
• /
• 2007

최근 IT기술의 비약적인 발전과 더불어 사용자의 편의성을 극대화 시키는 웨어러블 컴퓨팅 기술이 주목을 받고 있다. 이러한 기술은 일반인뿐만 아니라 장애인들의 일상생활의 보조 도구에 활용되어 큰 도움이 될 것으로 예상된다. 본 논문에서는 시각 및 청각장애인을 위해 개발된 착용형 단말기들을 소개하고자 한다. 시각 장애인용 단말기인 SmartWand는 시각장애인용 지팡이에 부착하거나 손에 휴대할 수 있는 장치로, 시작장애인을 위한 보행 보조 및 색상과 명암 정보 인식 보조 기능을 갖춘 장치이다. SmarWand는 시각장애인이 보행 시 이용하는 기존의 지팡이로는 감지할 수 없는 전방의 장애물을 초음파 센서를 통해 탐지하여 촉각이나 음성으로 경고해주고, 물체의 색깔이나 주변의 밝기 정도를 측정하여 시각장애인에게 알려준다. 청각 장애인용 단말기인 SmarWatch는 손목에 착용하는 장치로서 아기 울음소리, 노크나 초인종 소리, 물 끓는 소리, 화재 경보 등 가정에서 발생하는 일상적인 소리를 인식할 수 있도록 해준다. SmartWatch는 입력 모듈의 마이크로 입력된 소리를 문선통신을 통해 컴퓨터로 전송한 후에 소리의 종류를 인식하고 적절한 제어신호를 다시 무선통신을 통해 전송받아 감지된 소리의 종류를 해당하는 진동과 시각정보로 표시해준다. 이런 착용형 단말기들을 통해 시각 및 청각 장애인의 일상 생활의 안정성과 편의성이 증대 되기를 기대한다.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.2
• /
• pp.1-13
• /
• 1998

The most important goal of character animation is to efficiently control the motions of a character. Until now, many techniques have been proposed for human gait animation, and some techniques have been created to control the emotions in gaits such as "tired walking" and "brisk walking" by using parameter interpolation or motion data mapping. This paper proposes a human running model based on a one-legged hopper with a self-balancing mechanism. The proposed technique exploits genetic programming to optimize movement, and can be easily adopted to various character models. We extend the energy minimization technique to generate various motions in accordance with emotional specification.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.4
• /
• pp.245-254
• /
• 2014

In this paper, stable and robust dynamic walking for a biped motion is proposed. To success this objective, the following structures are processed. In this paper, the proposed control method is one that adjusts actual zero moment position to move to the closest possible point in the stable area instead of following desired zero moment position. This minimizes energy consumption with the smallest joint movements. The proposed control method makes mechanical energy that drives lower limb of the bipedal robot efficient. In this paper, walking experiment is carried out with the three control structures mentioned above. The trajectory generated by off-line is illustrated by performing to walking on flat ground. experiment with an obstacle whose height is lower than that of trajectory is executed to validate dynamic motion.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.53-58
• /
• 2006

IHRA Pedestrian Working Group has investigated and analyzed the current status of pedestrian-vehicle accidents in IHRA member countries. According to the results, European countries and Japan are working on new regulations to improve passive pedestrian protection on passenger cars significantly. Although IHRA proposed pedestrian test procedures, which may provide a basis of technical regulations in the future, further research and development are necessary to refine the procedures. In order to prepare and satisfy the pedestrian protection requirements, domestic passenger vehicles also should be tested. Among various safety-related studies based on accident data analysis, dealing with pedestrian head injury would be considered one of the keen interests. In this study, the pedestrian headform impact test system is developed. The developed system will be useful to carry out validation study of the test procedures through actual tests using sample vehicles, and to explore the car feasibility level prior to the use of the test methods in legislation.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.810-815
• /
• 2004

In this paper, we propose new parallel mechanism of a 3 dimensional biped robot whose each leg is composed of two 3-dof parallel platforms linked serially. This proposed parallel mechanism is able to move freely in the man-made environment and is applied to various fields, such as medical, welfare, and so on. And a total weight of each leg is expected to be lighter than serial linked leg. One side leg consists of a 3-dof orientation platform and 3-dof asymmetric parallel platform. The former consists of three active linear actuators and seven passive joints, and the latter of two active linear actuators, one active rotational actuator and eight passive joints. Thus, there are two kinds of parallel platforms each chain's elements and active joint's positions are different for the biped robot to move freely like a serial link without the kinematics constraints. The effectiveness and the performance of the proposed parallel mechanism and locomotion trajectory are shown in computer simulations with a 12-DOF parallel biped robot.