• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.60-75
• /
• 2019

Nowadays, interest in safety of pedestrians who are relatively weak when compared with vehicles increases. Also, concern for pedestrian accidents on crosswalks increases. For these reasons, scrambled crosswalks which are considered to contribute pedestrian safety by reducing conflicts between vehicles and pedestrians are actively discussed and there are also a few intersections where they are actually installed. However, scrambled crosswalks must include all-red phase for all vehicle traffic flows, which inevitably leads to increase of lost time per cycle. Therefore, evaluation in terms of efficiency should be done before installation of scrambled crosswalks. This research suggests installation criteria for scrambled crosswalks so that it is possible to judge whether installation of scrambled crosswalks is appropriate only by surveying vehicle traffic volume and pedestrian traffic volume. This research derives optimum cycle length from signal optimization models which considers both vehicle traffic volume and pedestrian traffic volume. From this optimum cycle length, this research compares total delay time before and after installation of scrambled crosswalks. From an analysis, two research results are derived. Firstly, there is critical traffic volume above which installation of scrambled crosswalks can not efficient. Secondly, appropriate areas for installation of scrambled crosswalks are different by each signal intersection or by each signal system and those difference vary. From these results, this research suggests installation criteria for scrambled crosswalks which consists of two steps. The delay time of the pedestrians may be increased after the diagonal crosswalk is installed, but it may be desirable to install in consideration of the appropriate traffic level to ensure safety.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.47-55
• /
• 2016

Purpose: This study was aimed at providing the basic checklist as a means to assess the crime risk in physical environment of the pedestrian passage at residential area. Method: For this purpose, the preliminary checklists were selected according to the review of the precedent studies of checklists in exterior pedestrian passage. The usefulness and the importance of the preliminary checklists were analyzed through the seven expert group meetings, the 87 questionnaires survey of the crime experts & the architectural/urban experts, preliminary assessment and field survey. Results: The assessment categories of checklists were sorted into six types, i.e. spatial structure & function, lighting, landscaping, security facilities, other facilities and cleaning & maintenance. The 49 checklists were proposed according to the assessment categories. The final checklists were divided key checklists and general checklists based on the results of experts' weighting of each list item. There were significant differences between crime experts' weighting and architectural/urban experts' weighting in several checklists, i.e. dividing between pavements and streets, the brightness of light, white light.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.2
• /
• pp.26-34
• /
• 2020

This study is to find a way that improves the pedestrian environment in the main street in rural areas. The main streets of five local governments in Jeollanam-do, general towns and bases seat of a myeon office, were studied. The research results are as follows. First, all three groups under investigation required multi-purpose activities on main street. This is thought to be due to the maintenance of the main street with vehicle-centered maintenance, thereby revising the walking space around essential activities. Second, the simple size of the sidewalk width is not closely related to the safety of pedestrians, and it is judged that the pedestrian space should be maintained considering the size of the floating population, acceptable activities, and proper sidewalk width. Third, the center where pedestrian space and streetscape are maintained has spatial constraints on sidewalks and lanes, so there should be spatial flexibility. Also, it is necessary to find a way to minimize the occupancy of pedestrian roads due to ground parking lots in relation to pedestrian continuity. Fourth, improvement of walking environment should involve community activities other than physical improvement.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.67-75
• /
• 2002

The purpose of this study is to assess the ability of balance control in virtual moving surround stimulation using head mount display (HMD) device and force platform in patients with brain injury. Fifteen patients with stroke (mean age 54.47 yrs) and fifteen healthy normal persons participated. COP parameters were obtained total path distance, frequency of anterior-posterior and medial-lateral component by FFT analysis, weight-spectrum analysis in the two different conditions; (1) during comfortable standing with opened or closed eyes, (2) during virtual moving surround stimulation delivered using HMD with four different moving pattern. Moving patterns consisted of close-far, superior-inferior lilting (pitch) , right-left tilting (roll) and horizontal rotation (yaw) movement. In all parameters, the test-retest reliability was high. Also, the construct validity of virtual moving surround stimulation was excellent (p＜0.05). A posturographic balance assessment system equiped with virtual moving surround stimulation using HMD is considered clinically useful in evaluation of balance control in patients with brain injury.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.330-340
• /
• 2016

The main objective of study was to analyze the effectiveness of transit mall. To this end, this study compared operational status of transit malls in operation (Daegu, Seoul and Busan). For the city of Busan where the latest transit mall became operational in 2015, a discriminant model was proposed to determine user satisfaction/dissatisfaction. The outcomes of comparative study showed that each city has different operational focus - Seoul has focus on traffic demand management, Busan has focus on walking environment, and Daegu has focus on accessibility to public transportation. Also, the discriminant model indicated that market sentiment, convenience of bus service, traffic accident risk, number of pedestrian, market user number have effects on user satisfaction. These results implied that, to improve user satisfaction, measures for market revitalization such as opening events and forming consultative groups need to be prepared and traffic conditions should also be improved through expansion of curfew time, linkage with subway station.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1346-1349
• /
• 2007

신축 구조물의 설계 단계에서 동적 강도 기준 및 진동 설계 기준을 설정하고 사람의 거동에 따른 기준층 구조의 동적 사용성 및 건물의 용도별 진동 영향성 평가를 동적 시뮬레이션 기법을 토대로 정량적인 방법을 통하여 수행하고 그 결과를 바탕으로 건물 사용성 및 용도에 따른 구조물의 안정성, 근무 요원들의 근무 환경 및 건물 운용의 관점에서 진동 영향성 평가를 수행함과 동시에 필요한 경우 최적의 동적 대책을 수립한다. 또한 건물 내부의 운용설비가 구조물에 미치는 영향을 평가하여 최적의 방진 대책을 제시하여 건물 완료 후 발생할 수 있는 진동 문제를 최소화 하고자 한다.

• Korean Journal of Environment and Ecology
• /
• v.33 no.3
• /
• pp.354-365
• /
• 2019

This study measured and analyzed the weather characteristics and the air-ion characteristics of walking space by land use type in Chungju, Chungcheongbuk Province during the heat wave. We used the land registration map to classify the type of land use in walking areas in the studied into the production and green area, the residential area, and the commercial area. We then selected 44 measurement points in about 4.1 km. They included 12 walking space points in the green area, 14 in the residential area, and 18 in the commercial area. Moreover, we calculated the ion index by analyzing the impact of weather factors such as temperature, relative humidity, solar radiation, and net radiation in the walking space on the anion generation and cation generation by land use type during the heat wave. Comparison of air ion characteristics in walking space by type of land use during the heat wave showed that the average cation generation was in the order of commercial area ($700.73cations/cm^3$) > residential area ($600.76cations/cm^3$) > green area ($589.73cations/cm^3$). The average anion generation was in the order of green area ($663.95anions/cm^3$) > residential area ($628.48anions/cm^3$) > commercial area ($527.48anions/cm^3$). The average ion index was in the order of green area (1.13) > residential area (1.04) > commercial area (0.75). This study checked the weather characteristics, cation generation, and anion generation in walking space according to the land use type during the heat wave and checked the difference of ion indexes in the walking space according to the land use type. However, there were limitations in the lack of accurate comparison according to the land use due to the moving measurement and the insufficient quantitative comparison according to the change of road width. Therefore, we recommend further studies that consider the road characteristics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.68-80
• /
• 2016

This study analyzed the influence of the perception of physical environment on user satisfaction and park use when people use the park to improve their health. The study is focused on neighborhood parks in Suseong-gu, Daegu city. Statistical analyses were employed to data collected from 143 visitors on site. First of all, in the perception evaluation of the physical environment of the park, accessibility and pedestrian environment are the highest at 4.04, while water space and attractions in the park as the lowest parts are at 2.32 and 2.66. After conduct factor analysis to type 22 physical environmental awareness components, five main factors--Comfort, Availability, Amenity, Facilities convenience and Visuality--were classified. Then, satisfaction and influence on park use were analyzed. As a result, the factors affecting user satisfaction were comfort, availability, amenity and facility convenience. Among them, the category of amenity was the most influential factor at 0.315. The factors affecting the park use were availability and amenity. Availability factor had a higher influence at 0.396 than amenity at 0.293. Therefore, in order to improve satisfaction and park use for health improvement, it is necessary to secure sufficient green areas and create a pleasant environment. Also, it is necessary to improve the quality of walkability from homes to parks, trail improvement and other improvements.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.175-179
• /
• 2010

This study was to evaluate of installation location and management problem for a closed circuit television according to the present situation and installation environment when the CCTV doesn't take a location, surrounding environment, mechanical function in the campus. This methodology used network analysis, mechanical characterization and Streetlight illuminance. As a result, we confirmed in Kyung-Buk National University that was problem of unrelated location of walk pattern in students, a short of illuminance location, only 25 CCTV can be used to crime prevention of student in the night but, the other one is need to some improvement under 44 CCTV.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.363-367
• /
• 2003

Contact area and pressure are important factors which directly influence a life of knee implants. Since implant's mechanical functions should be experimentally evaluated for clinical use, many studies using a knee simulator and a pressure sensor system have been conducted. However it has not been reported that the contact pressure's distribution of a knee implant motion was estimated in real-time during a gate cycle. Therefore. the objective of this study was to analyze the contact pressure distribution for the motion of a joint using the knee simulator and I-scan sensor system. For this purpose, we developed a force-controlled dynamic knee simulator to evaluate the mechanical performance of artificial knee joint. This simulator includes a function of a soft tissue and has a 4-degree-of-freedom to represent an axial compressive load and a flexion angle. As axial compressive force and a flexion angle of the femoral component can be controlled by PC program. The pressure is also measured from I-scan system and simulator to visualize the pressure distribution on the joint contact surfaces under loading condition during walking cycle. The compressive loading curve was the major cause for the contact pressure distribution and its center move in a cycle as to a flexion angie. In conclusion, this system can be used to evaluate to the geometric interaction of femoral and tibial design due to a measured mechanical function such as a contact pressure, contact area and a motion of a loading center.