• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.160-167
• /
• 2017

The purpose of this study is to identify the possibility of developing the 100% Recycled-resources Absorbent-Pervious Alkali-activated Blocks using both the alkalli-binder and the recycled aggregate. In addition, It established a test method such as Void ratio, compressive strength, coefficient permeability, absorption, and evaporation. As a result, an alkali-activated using recycled aggregate block was able to manufacture an 24 MPa class absorbent-pervious blocks with a liquid type sodium silicate and early high temperature curing. In this case, water-holding capacity, absorption and relative absorption were more effective than the natural aggregates. In conclusion, Absorbent-pervious alkali-activated Block Using recycled aggregate has a surface temperature reducing effect of approximately 10 % compared to ordinary concrete block.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.905-905
• /
• 2012

현재 도시유역의 홍수피해를 경감시키기 위한 방안으로 우수유출 저감시설에 대한 연구가 활발히 진행 중에 있다. 그러나 침투형 우수유출 저감시설의 경우 침투량 산정에 필요한 여러 인자 중 토성에 의해 저감 능력에 많은 차이를 보이고 있으며, 강우시 침투로 인한 토양내 함수비의 변화와 선행강우 조건 등에 의해 정량적인 분석이 어려워 활용도가 미흡한 실정이다. 따라서 본 연구에서는 2009년 국립방재연구원에서 시행한 침투실험 자료의 조건과 동일하게 투수계수 및 형상이 다른 두 종류의 투수성 보도블록 A, B와 토양내 선행강우의 유무에 대하여 표 1과 같이 검증 케이스로 구분하고, 4 가지의 강우강도로 모의 조건을 설정한 후 불포화 투수층의 침투해석을 실시하고 실험결과를 이용하여 모의결과에 대한 검증을 시행하였으며, 모의 결과의 검증을 뒷받침하기 위하여 통계적인 적합도를 나타내는 평균제곱오차(RMSE), 평균편차비율(PBIAS), 모형 효율성 계수(NSE), 지속성 모형효율성 계수(PME)을 산정해 보았다. 검증 결과 그림 1과 같이 투수성 보도블록 B의 형태가 투수성 보도블록 A의 형태보다 적합도가 높게 나타났고, 50mm/hr의 강우강도에서 변동성이 크게 나타났으나, 50mm/hr를 제외한 나머지 강우조건에서 양호한 적합도를 보였으며, 선행강우가 있는 조건이 선행강우가 없는 조건에 비해 높은 적합도를 나타내었다.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.31-38
• /
• 2011

As the percentage of permeable ground is reduced due to the increased impermeable roads of major cities, a heat island phenomenon can be dominantly observed, resulting in increased temperature. In addition, rainfall that would have been naturally absorbed and retained by the permeable ground is overflowed due to large volumes of run-off water, resulting in more sewer failures and increased erosion. In terms of permeable pavement system, block paving has been used anywhere as well as provides many years of service. The permeable block paving is an effective alternative to the more traditional asphalt or plain concrete for minor roads; furthermore, it looks a lot better than other pavements. In this study, the functional drainage evaluation of block paving was carried out, considering the usage of experimental sludge and wheel tracking test, in order to simulate the field condition of roads.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.79-89
• /
• 2019

The field measurement and laboratory experiment were conducted to investigate the effect of reducing the surface temperature of the functional aspect of the heat island phenomenon of the permeable block which is made the recycled synthetic resin rather than the existing concrete permeable block. Field measurement was taken for 3 days in consideration of dry condition and wet condition and laboratory experiment was divided into dry condition, rainfall simulating condition, and wetting condition. The variations of temperature and the evaporation rate of water moisture content after experiment were confirmed. As a result of field measurement, it is confirmed that the surface temperature decreases due to the difference in albedo of the pore block surface rather than the cooling effect due to the latent heat of vaporization. The evaporation of moisture in a dry state where drought persisted or a certain level of moisture was not maintained in the surface layer. As a result of laboratory experiment, resin permeable block gives higher surface temperature when it is dry condition than concrete permeable block, but the evaporation of water in the pore is kept constant by capillary force in rainfall simulation condition, and higher temperature reduction rate. As a result of measuring the evaporation rate after laboratory experiment, it is confirmed that the effect of reducing temperature is increased as the evaporation rate of water is higher. Based on these results, correlation formula for evaporation rate and temperature reduction rate is derived.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.297-303
• /
• 2014

Recently, block and permeable pavements have been placed in apartment complex. However. it is hard to decide the cycle of maintenance and repair due to lack of performance evaluation criteria for these pavements. This study carried out life cycle cost analysis(LCCA) to present resonable alternatives of the pavements by considering initial construction cost, maintenance and repair cost along with the cycle of repair. According to results of LCCA, the interlocking concrete block pavement is the best alternative when the repair cycle of 20years is assumed, while asphalt concrete pavement is the best alterative when the repair cycle of 10years is assumed. Therefore, the repair cycle is most important factor to select alternative. Also, it is necessary to develop resonable performance evaluation index to quantify the cycle of maintenance and repair in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.40-42
• /
• 2018

지구온난화에 따른 연안의 해수면 상승은 해안에 가해지는 파랑에너지의 상승을 유발한다. 이러한 해수면의 상승은 상대적으로 수심이 깊어지는 효과를 초래하고 이는 과거 발생하지 않았던 해안지역의 침식 및 해빈에서의 모래를 유실시킨다. 특히, 국내 연안 225개소의 연안 모니터링 결과 142개소인 62%가 침식우려 이상의 등급으로 나타났다. 일반적으로 연안침식에 대응하는 방법은 호안을 쌓아 보호하게 되는 경성공법으로 외력의 변화에 따라 현장여건에 맞는 호안의 경사, 단면형상 및 재료를 선택하게 된다. 하지만 현상에 대한 불충분한 이해에 근거한 공법 적용으로 제반국가에서 다양한 피해가 발생하고 있으며, 이는 공법신뢰도 향상을 위한 기술개발 및 융합기술 도입의 필요성을 보여준다. 본 연구는 파랑저감에 효과적인 다공성 구조물Biocoast를 활용하여 해안침식피해억제를 위한 친환경 투수 바이오 콘크리트 블록을 개발하였다. 특히, 자연해변 및 호안시설에 대해 자연 및 인위적 외력에 의한 침식과 세굴로부터 연안을 보호하고, 블록의 유닛화를 통해 품질관리 및 공정관리의 효율성을 향상시킬 수 있을 것으로 사료된다.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.275-286
• /
• 1998

The effective permeability and the representative element volume(REV) of fracture network model were evaluated based on the parameters such as permeability tensor, principal permeability and the direction of principal permeability. The effective permeability ranges between the harmonic mean and the arithmetic mean of the local permeabilities of subdivided blocks. From the numerical experiments, which were for investigating the influence of model volume on the variation of flux for the cubic models, it was found that the variation of flux became reduced as the model volume approached REV. The variation of groundwater flux into the tunnel in the fracture network model was mainly dependent on the ratio of the tunnel length to model size rather than REV. And it was found that groundwater flux into the tunnel was not completely consistent between the fracture network model and the equivalent porous media model, especially when the ratio of the tunnel length to model size is small.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2009

Infiltration is the process of water penetrating from the ground surface into soil. Infiltration plays an important role on affecting ground water surface and surface flow during rainy season. The amount of infiltration water would be decreased as the urbanization would increase. Such phenomenons would make streamflow decrease or stream run dry. In this study the cumulative infiltration and the infiltration capacity of ground surface have been determined by the field experiment at three sites in the Hankyong National University, Korea. Three type pervious pedestrian blocks of the cumulative infiltration and the infiltration capacity have also been determined at the same site of the ground surface. It has been shown that one of three type blocks in terms of infiltration capacity is almost same as that of ground surface. The Kostiakov type has been adopted to determine the cumulative infiltration and the infiltration capacity for each site. The Horton type has been also adopted to determine the cumulative infiltration and the infiltration capacity. The value of parameter k for each site is determined and soil type would be identified corresponding to the value of parameter.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.305-311
• /
• 2020

Rising sea levels along the coast from global warming causes the increase of wave energy along the coast. This rise in sea levels results in relatively deep water levels, which would incur the loss of sand that had not occurred in the past from erosion in coastal areas. Generally, it has been challenging to protect against coastal erosion, and the slope, cross-sectional shape, and materials are selected for the site conditions depending on the change in external forces. However, the application of counter measures based on insufficient understanding of the phenomenon is causing various damage, indicating the need for technological development and converging technologies to improve credibility. In this study, we developed eco-friendly permeable biopolymer concrete blocks to control the coastal erosion by using the Bio-Coast, an effective porous structure that mitigates the destructive erosion caused by the rising sea levels. The hexagonal design of Bio-Coast was derived from the honeycomb, columnar joints, and clover, which are durable and stable structures in nature, and the design was changed to apply bumps on the Bio-Coast filling in the form of a clover to reduce wave overtopping and run-up. Applying the field condition of beaches on the east coast of Korea, the block weight and size were decided and the prototype blocks were manufactured and are ready for field placement. In particular, it is intended to protect coastal areas from destructive erosion by natural and artificial external forces, and to extend the design to river,s lakes, and natural walking trails, to improve the efficiency of quality control and process control through the use of blocks.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.187-192
• /
• 2017

This study evaluated the reduction performance of ambient temperature and the amount of evaporation that takes place depends on the temperature difference of paving blocks which are used in the sidewalk, roadway, parking lot, park, plaza, and etc. The water-retentive block of the LID (Low Impact Development) practice was compared with the conventional concrete block. For the quantitative performance evaluation, experiments were performed in a climatic environment chamber capable of controlling the climatic environment (solar radiation, temperature, humidity, rainfall, and snowfall). The method for performance evaluation was proposed using temperature, humidity, and ambient air of paving blocks which changes according to the solar radiation and the wind speed after the rainfall. As a result, the evaporation amount of the water-retentive block was 2.6 times higher than that of the concrete block, the surface temperature of water-retentive block was $10^{\circ}C$ lower than the concrete block, and the air temperature of water-retentive block was $4.6^{\circ}C$ lower than the concrete block. Therefore, it is analyzed that the water-retentive block with a large amount of evaporation is more effective in reducing the urban heat island phenomenon as compared with the concrete block.