• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.377-380
• /
• 2008

Structural lightweight concrete will reduced total loads of supporting sections and foundations in archtectural and civil structures. So, the lightweight concrete can use widely for various purpose in the archtectural and civil structures. However, the performance of lightweight concrete is essentially dependent of properties of used lightweight aggregates. So, in this paper were examined the fresh and hardened properties of lightweight concrete that are used 3types of the differences properties of lightweight aggregates from lower water-ratio to higher water-ratio of concrete mixing regions. Lightweight concrete was somewhat exhibit larger slump loss than ordinary concrete. Also, the development of compressive strength was lower than ordinary concrete, however it was not showed a marked difference. According to types of lightweight aggregates, the case of synthetic lightweight aggregate are highest performance in fresh and hardened concrete, but it is should be to evaluate the structural performance testing as anchoring and bond strength with reinforcing steel bars.

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.25-37
• /
• 2011

The purpose of this study is to investigate the relationship between personality type and symptoms and contributing factors of temporomandibular disorders. 199 college students completed the MBTI(Myers-Briggs Type Indicator) and a questionnaire and collected data were analyzed by SAS 9.2 program. The obtained results were as follows : 1. The prevalence of symptoms of temporomandibular disorders and mean scales of positive answers of contributing factors appeared to be higher in I type, S type, T type, P type than in E type, N type, F type, J type. 2. ISTP and ISFP among 16 types of personality seemed to have higher prevalence of symptoms and contributing factors of temporomandibular disorders than other types of personality. 3. Symptom of TMJ pain during mouth opening seemed to occur more frequently in I type, S type, F type, J type than in E type, N type, T type, P type. 4. Contributing factors including clenching and stressful state occurred significantly more frequently in I type than E type. Gum chewing habit occurred significantly more frequently in E type than in I type. 5. Unilateral chewing habit occurred significantly more frequently in J type than in P type. 6. Nervous or sensitive persons had significantly higher mean scales of positive answers of subjective symptoms than relaxed or general persons. 7. General persons had significantly lower mean scales of positive answers of contributing factors than nervous, sensitive and relaxed persons. In conclusion, these results show that there is the relationship between personality and temporomandibular disorders and patient education and counselling considering personality type may contribute to treating patients with temporomandibular disorders.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.50-53
• /
• 2007

Although the lateral discoid meniscus of the knee has been observed frequently, the medial discoid meniscus has very rarely been reported in the literature. A 22-year-old female patient was diagnosed as having a medial discoid meniscus with horizontal tear by means of magnetic resonance image and arthroscopy. The patient was treated by arthroscopic partial meniscectomy.

• 전기의세계
• /
• v.58 no.8
• /
• pp.51-60
• /
• 2009

지능형 전력망은 통신 기술을 통해 에너지 사용을 최적화 하고 안정성을 높이는 차세대 전력망으로서 그 내부에는 다양한 통신 환경과 특성이 존재한다. 지능형 전력망에서는 일반 수용가의 부하특성이나 전기 사용량 등 비실시간 정보뿐만 아니라 전력망의 안정적이고 지능적인 운영을 위한 다양한 감시제어 데이터와 같은 실시간 정보가 함께 전달된다. 이러한 정보들은 전달 과정에서 누출, 번조가 되지 않고 원하는 사용자에게 원히는 시간과 장소에 정상적으로 전달될 수 있도록 높은 수준의 정보 보안이 뒷받침 되어야 한다. 그러나 최근, 감시제어 정보 전달은 보통 인터넷과 같은 일반적인 통신보다 고품질을 요구하기 때문에, 통신 품질을 저하시킬 수 있는 보안 서비스를 지능형 전력망에 적용하기에는 제약이 따른다. 본 논문은 지능형 전력망의 주요 통신 환경별 요구사항을 살펴보고, 이러한 요구사항을 만족시키면서 높은 수준의 정보 보안을 제공하기 위해 어떠한 보안서비스가 제공되어야 하는지 알아본다.

• Korean Journal of Agricultural Science
• /
• v.15 no.1
• /
• pp.82-94
• /
• 1988

This study was performed to obtain the basic data which can be applied to use of foaming mortars. The results obtained were summarized as follows ; 1. The lowest water-cement ratios were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and decreased in more addition of foaming agent. The water-cement ratios were decreased up to 1.6-53.1% by mix-foaming type and 4.4-24.1% by pre-foamed type than cement mortar. 2. The highest bulk densities were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of bulk densities were increased in richer mixing ratio and more addition of foaming agent. 3. The bulk densities were decreased up to 38.8-55.9% by mix-foaming type and 9.7-23.6% by pre-foamed type than cement mortar. 4. The lowest absorption rates were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of absorption rates were increased in richer mixing ratio and more addition of foaming agent. 5. Absorption rates when immersed in 72hours were shown up to 3.41-5.85 times greater by mix-foaming type and 1.05-1.55 times greater by pre-foamed type than those of cement mortar. it was significantly higher at the early stage of immersed time than cement mortar. 6. The highest strengths were shown at the mixing ratio of 1 : 1. But, it was gradually decreased in poorer mixing ratio and more addition of foaming agent. The decreasing rates of strengths were increased in poorer mixing ratio and more addition of foaming agent. 7. The strengths were decreased up to 77.0-92.8% by mix-foaming type and 36.7-74.4% by pre-foamed type than cement mortar. 8. The lowest air contents were shown at the mixing ratio of 1 : 1. But, it was gradually increased in poorer mixing ratio and more addition of foaming agent. The increasing rates of air contents were increased in richer mixing ratio and more addition of foaming agent. 9. Air contents were shown up to 26.0-63.8 times greater by mix-foaming type and 5.8-17.7 times greater by pre-foamed type than those of cement mortar. 10. The correlations between bulk density, absorption rate, compressive strength and air content were highly significant. The multiple regression equations of bulk density, absorption rate, compressive strength, tensile strength, bending strength and air content were computed depending on a function of mixing ratio and addition of foaming agent. They were generally highly significant.

• The Magazine of the IEIE
• /
• v.24 no.10
• /
• pp.23-44
• /
• 1997

이 글에서는 요즘 신문이나 텔레비전을 통해서 인체 내부를 돌며 검사 및 치료를 하는 마이크로 로보트 등의 차세대 첨단기술로서 일반 국민들에게 소개되기도 하며, MEMS, 마이크로머신, 마이크로시스템, 혹은 초소형 정밀기계 등으로 불리는 기술과 이 기술에 대한 각국 (미국, 일본, 유럽, 한국)의 기술 동향을 소개한다. 이에 이어서, 현재 과기처의 선도기술개발사업 (소위 G7사업) 으로서 진행되고 있는 초소형 정밀기계 기술개발 사업에 대한 소개를 한다. 이 분야에 종사하지 않는 보통 사람들을 위해 가급적 쉬운 말로 풀어 쓰도록 노력하였다. 이 글에서 다루고 있는 크기의 기본 단위는 마이크로미터 (천분의 일 밀리미터) 이며, 사람의 머리카락의 직경이 약 100 마이크로미터 (0.1mm) 내외이다. 초소형 기계나 초소형 부품들은 대개 이 머리카락의 직경정도이며, 머리카락속에 모터나 기어 등이 들어있다고 생각해도 크게 틀리지 않을 것이다.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.281-289
• /
• 1998

This study has been performed to test the flowability and filling ability of high flowing concrete as well as distribution of aggregate and pore of core specimen, heat of hydration, compressive strength and core strength of concrete. In addition, the resistance to chloride ion penetration and chemical solutionof concrete was tested in order to evaluate the resistance to sea water of concrete and its application of high flowing concrete using blended low heat cement in the field of Seohae Grand Bridge. The properties of high flowing concrete with blended low heat cement were compared with ordinary 25-240-15 concrete using Type V cement. As the results of this study, the flowability and filling ability of high flowing concrete with blended low heat cement is satisfied without vibration. Though the cement content of high flowing concrete with blended low heat cement was 400kg/m$^2$, the rising temperature of it was relatively lower than that of the ordinary 25-240-15 concrete with Type V cement. Also, the compressive of high flowing concrete with blended low heat cement is similar to that of the ordinary 25-240-15 concrete with Type V cement.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.89-98
• /
• 2004

Conversational agent is a system that provides users with proper information and maintains the context of dialogue on the natural language. Analyzing and modeling process of user's query is essential to make it more realistic, for which Bayesian network is a promising technique. When experts design the network for a domain, the network is usually very complicated and is hard to be understood. The separation of variables in the domain reduces the size of networks and makes it easy to design the conversational agent. Composing Bayesian network as two stages, we aim to design conversational agent easily and analyze user's query in detail. Also, previous information of dialogue makes it possible to maintain the context of conversation. Actually implementing it for a guide of web pages, we can confirm the usefulness of the proposed architecture for conversational agent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.437-437
• /
• 2013

3족 질화물은 우수한 광학 특성과 특히 3족 물질의 조성비 조절로 넓은 대역의 밴드갭 엔지니어링으로 발광다이오드의 물질로 각광 받고 있다. 이와 더불어 발광다이오드의 광추출효율을 향상시키기 위해 다양한 연구들이 활발히 이루어지고 있다. 그 연구 중 하나로 나노, 마이크로 사이즈의 막대와 같은 일차원적 구조와 최근 ITO를 활용한 투명 전극을 대체하여 전도도가 100배 정도 높은 금속을 이용한 옆면 접촉 전극을 도입한 것이 최근 발표되었다. 그러나 옆면 접촉 전극을 형성하기 위해서는 기존의 약 100 nm 정도의 두께의 p-형질화갈륨층은 공정 마진 등에 어려움이 있다. 따라서 기존에 비해 두꺼운 p-형 질화갈륨층이 필요하다. 보통 상용화된 유기 금속화학 증착법을 이용한 p-형 질화갈륨층은 도핑 물질인 Mg의 낮은 활성화와 성장 분위기 중 수소로 인해 양질의 것을 얻기 어렵고 이를 위해 성장 후 추가적인 활성화가 필요하다. 따라서 두꺼워진 p-형 질화갈륨층에 대해서도 기존의 성장 조건과 활성화 조건의 적합 여부와 이에 대한 연구가 필요하다. 따라서 본 연구에서는 양질의 p-형 질화갈륨을 얻기 위하여 성장 조건 및 성장 후 급속 열처리 온도, 시간에 대한 최적화와 약 630 nm 두께의 p-형 갈륨질화층을 가지는 발광다이오드에 대해 급속 열처리 조건에 대한 특성 연구를 실시한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.605-608
• /
• 2004

내장형 시스템(embedded system)의 발전에 따라, 더욱 복잡하고 높은 신뢰성을 가지는 내장형 응용프로그램의 개발 필요성이 요구된다. 내장형 소프트웨어의 성능 평가 및 분석 도구는 내장형 소프트웨어 개발 속도와 신뢰성을 높이기 위한 유용한 도구이다. 개발자나 사용자는 성능 평가 결과와 로그 정보를 직관적으로 판단하기 위해 GUI 형태의 결과보고 도구(result report tool)나 뷰어(viewer)를 이용할 수 있다. 그러나 보통의 성능 평가 및 분석 도구가 이용하는 로그 데이터는 텍스트 기반의 저수준 정보이므로, 개발자의 다양한 요구에 맞는 분석 결과보고 도구 나 뷰어를 생성하기 위해서는 로그 정보에 대해 많은 분석 시간과 노력을 기울여야 한다. 본 논문은 내장형 시스템 개발자가 쉽고 편리하게 원하는 GUI 형태의 결과 분석도구를 생성할 수 있도록 하기 위한 프로파일 로그 분석 방법을 제안한다. 제안하는 로그 분석 방법은 저수준의 성능 평가 로그를 분석하여 자료구조화 하는 모듈과 이것을 GUI 형태로 쉽게 변경할 수 있는 API 수준의 함수를 제공한다. 제안하는 로그 분석 방법에 의한 API를 통해 개발자나 사용자는 자신의 취향에 맞는 GUI 형태의 결과 분석 도구를 쉽고 빨르게 생성하여 내장형 소프트웨어 개발의 효율성을 높일 수 있다.