• 제목/요약/키워드: 보존처리용 세척제

검색결과 3건 처리시간 0.021초

토기 및 도자기 유물에 사용되는 보존처리용 세척제의 안정성 평가 (Stability Evaluation of Cleaning Agent for Ceramics)

  • 박대우;강현미;남병직;장성윤
    • 보존과학회지
    • /
    • 제25권4호
    • /
    • pp.451-464
    • /
    • 2009
  • 토기 및 도자기 유물의 표면 오염물을 제거하기 위해서는 경우에 따라 화학적 세척과정이 필요하며, 그 과정은 신중하게 이루어져야 한다. 본 연구에서는 화학적 세척제가 토기 및 도자기에 미치는 영향을 평가하기 위해 침적실험을 수행하여 주성분원소의 용출특성에 대해 정량적인 데이터를 제공하고자 하였다. 연질토기는 재질이 약하고 흡수율이 커서 짧은 침적 시간에도 큰 용출특성을 가졌고 강한 산성에 의해서 표면 박락과 색의 변화가 발생했다. 그러나 이러한 색의 변화는 물리적인 특성에는 영향을 미치지 않았다. 경질토기에서는 용출량이 미비하고 강한 산성에 의한 색차변화와 물리적인 변화가 없는 것으로 확인되어, 세척제에 대해 비교적 안정한 것으로 사료된다. 도자기(청자, 백자, 분청사기)에서는 용출량이 미비하여 시료의 안정성에는 영향을 미치지 않는 것으로 판단된다. 하지만 도자기 유물에서는 빙렬이 용출특성에 관여하는 것으로 확인되어 분청사기 같은 빙렬이 발달된 유물에 적용할 시에는 주의가 필요하다.

  • PDF

비무장지대 출토 군화의 형태 복원을 위한 3차원 디지털 기술의 적용 및 보존처리 (Application and conservation of 3D technology for the restoration of the original shape of military boots excavated in the DMZ)

  • 오승준;위광철
    • 헤리티지:역사와 과학
    • /
    • 제56권2호
    • /
    • pp.124-133
    • /
    • 2023
  • 국방부 유해발굴단을 통해 발굴된 한국전쟁 전사자 유품의 보존 방법론을 제시하고자 3D 기술의 적용과 가역성 및 안정성이 우수한 보존 재료를 이용해 군화류 2점에 대한 보존처리를 진행하였다. 3D 스캐닝과 모델링을 통해 군화를 신었던 전사자의 발 사이즈를 추정해 볼 수 있었으며, 이를 기반으로 3D 출력 구조체를 이용해 원형을 복원하였다. 원형 복원은 출토 유품의 오염물 제거와 유연제 처리 작업을 거쳐 구조체의 형태로 복원하였으며, 열화되어 찢겨지거나 멸실된 부분은 접합 및 메움처리 후 고색처리를 통해 원형을 복원하였다. 보존처리 후 2종의 군화 모두 밑창과 발등 부분은 고무류, 발등 일부와 발목 부분은 합성가죽류로 제작된 것을 확인할 수 있었으며, 이는 방수 또는 방한의 목적으로 제작되어 1944년에 도입된 모델 Shoe Pac(M-1944, 12-inch) 방한화와 유사한 군화임을 확인하였다. 이러한 결과는 보존처리를 통해 출토된 유품의 제작기법과 재질, 용도 등을 밝혀낼 수 있음을 확인한 연구로서 과학적 보존처리와 3D 기술의 융합적 연구의 중요성을 보여준 사례이다.

보존처리용 세척제에 대한 토기의 이온용출 특성연구 (A Study on Ion Extraction Characteristics of Ceramics by Cleaning Agents)

  • 박대우;강현미;남병직;장성윤;함철희
    • 보존과학연구
    • /
    • 통권31호
    • /
    • pp.43-57
    • /
    • 2010
  • This study intends to provide quantitative data about the extraction characteristics of major elements of earthenware by executing soaking test of cleaning agents. It aims at providing basic data for the stability assessment when applying the cleaning agents for conserving earthenware. The data will be extracted from the analysis of co-relationship between the physical characteristics and the ion extraction characteristics. XRD analysis displayed that AT-1, AT-2 and AT-3 which did not generate mullite were fired at lower than 1,000 whereas AT-3 and AT-5 that included mullite were higher than 1,000. The degree of absorption was AT-4 > AT-2 > AT-1 > AT-3 > AT-5 in order and the correlation between the degree of absorption and firing temperature of earthenware displayed a positive correlation. Extraction amount of oxalic acid which was used for the removing iron oxide was AT-1 > AT-2 AT-4 > AT-3 > AT-5 in order. and the ion extraction data displayed that there is a positive correlation with absorption level. However AT-1 and AT-2 which were fired at lower temperature showed that there was no correlation between the ion extraction characteristics and absorption level. Ion extraction of citric acid produced little amount compared with the one of oxalic acid, yet it caused less damage to earthenware than oxalic acid when it applied. The result of ion extraction level in the absorption test displayed that Fe had higher level than in Si, Al from the test for both oxalic acid and citric acid. Based on the regression analysis of the data from the previous studies, the physical characteristics of the earthenware and ion extraction level, further studies will be conducted on the predicting technique on the extraction characteristics of major elements of earthenware samples for the conservation in future.

  • PDF