• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.122-128
• /
• 2010

This paper presents the characteristics for ground impedance of combined three rods according to distance of current probe and frequency using the fall-of-potential method and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position of auxiliary probes. In order to analyze the effects of ground impedance due to the distance of the current probe and frequency, ground impedances were measured in case that the distance of current probe was located from 5[m] to 20[m] and the measuring frequency was ranged in 55~513[Hz]. The results could be help to determine the position of current probe and the measuring frequency when the ground impedance was measured at grounding system.

• Journal of The Korean Association of Information Education
• /
• v.23 no.6
• /
• pp.599-606
• /
• 2019

Telepresence robot-assisted learning can provide opportunities of education for students who are in vulnerable physical, intellectual, cultural or environmental conditions. It is to be applied in international virtual education for global citizenship education. To date, the study of acceptance model has been conducted only for preservice teachers, and post-intention for use is not considered. This paper identified whether there are significant differences by gender or years of experience from elementary school teachers on it and the basic factors that affect the acceptance intentions for it. Factors related to intention to use for a telepresence robot were investigated, and a questionnaire about post-intention for use was made after participants operated. The results showed that elementary school teachers did not have a significant difference in each factor by gender. The experienced teachers showed no difficulty in using it. It was shown that PU, ATT, PENJ, SI and Ttrust were all extremely significant factors to affect acceptance intentions. It will be possible to establish educational information policies based on the acceptance intentions of elementary school teachers on telepresence robot-assisted learning.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2017

The purpose of this study was to investigate the effect of a new designed splint on the hand function. A new design splint that enlarges the area between thumb and index finger was manufactured using 3D printing. After wearing a new splint the patient was possible to open thumb and hold a small object. She showed improvement in overall hand function and could move eight blocks in box and block test. But grasping a cup without a handle has become more difficult than before. Also there is a disadvantage that it could not be fixed by water. This study is meaningful in that it is the first splint application study using 3D printing. In the future, we expect that various patient-specific splints will be developed through 3D printing in the field of occupational therapy.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.14-22
• /
• 2001

This paper presents the results of hull form design and powering performance for a 2.500 ton class trimaran frigate. A series of resistance tests and numerical calculations have been conducted to figure out the influences of side-hull form and position on the resistance characteristics of the trimaran. And the propulsion test was conducted to investigate the propulsion efficiency of the trimaran, and the powering performance of the trimaran was compared with that of the similar mono-hull ships in full scale. From the research it was found that the longitudinal position of side-hull had a large influence on the resistance characteristics of the trimaran while the side-hull form and transverse position had a small influence on it. The trimaran showed favorable resistance performance when the side-hull was located near the stern of trimaran, which was resulted from the fact that the side-hull stem was located near the primary wave hollow generated by the main hul1. The powering performance of the trimaran was superior to that of the similar mono-hull ships above the middle speed range.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.237-246
• /
• 2019

In order to improve the accuracy of the rating prediction of the recommendation model, not only user-item rating data are used but also consider auxiliary information of item such as comments, tags, or descriptions. The traditional approaches use a word-level model of the bag-of-words for the auxiliary information. This model, however, cannot utilize the auxiliary information effectively, which leads to shallow understanding of auxiliary information. Convolution neural network (CNN) can capture and extract feature vector from auxiliary information effectively. Thus, this paper proposes character-level deep-Convolution Neural Network based matrix factorization (Char-DCNN-MF) that integrates deep CNN into matrix factorization for a novel recommendation model. Char-DCNN-MF can deeper understand auxiliary information and further enhance recommendation performance. Experiments are performed on three different real data sets, and the results show that Char-DCNN-MF performs significantly better than other comparative models.

• Journal of Creative Information Culture
• /
• v.4 no.2
• /
• pp.95-101
• /
• 2018

As a result of introducing robot assisted learning which utilizes social robots or telepresence robots in language learning or special education, research on technology acceptance model for robot-assisted learning is also being conducted. The unified theory of acceptance and use of technology (UTAUT) model of intelligent robot has been studied, but of tele-operated robot is insufficient. The purpose of this paper is to estimate the UTAUT model by pre-service teachers who experienced telepresence robot-assisted learning that can be done in future school. It is found that the estimated UTAUT model consists of more concise factors than social robots, and the importance of perceived enjoyment is higher. In other words, the pre-service teachers showed significant acceptance of tele-operated robots with enhanced enjoyment composed of its mobility, communication, and touchable appearance of the face and body.

• Science of Emotion and Sensibility
• /
• v.13 no.3
• /
• pp.581-596
• /
• 2010

The purposes of this study are to investigate and analyze the level of information and the state of digital divide of the disabled by surveying the demand for information and communication assistive devices, and to provide basic data for plans on the development and utilization of information and communication assistive devices. In order to understand the actual condition and the state of digital divide of persons with disabilities, the differences of possession and accessibility of information technology devices, usage ability, and utilization were analyzed according to the disability profile by using the T-test. The results show that there are significant differences (T=-2.510*) of possession and accessibility of information technology devices with respect to the disability profile, and that the disabled have lower possession and accessibility of devices than the non-disabled. Result of this study's demand forecast shows that about 28% of total respondents are currently using information and communication assistive devices, and a majority (67%) of them answered that the use of assistive devices lend great help to their lives. The proportion of those who have been supported by the government or related organizations with information and communication assistive devices were 36% of the total respondents, and those satisfied with the performance of the devices were 46% of the total responses. Meanwhile, only 36% of total users answered that the operation and use of functions of the devices was easy and convenient, responding that the difficulty of operating assistive devices was the greatest inconvenience. Moreover, the general requests of respondents in regards to the devices were stabilization of device performance, miniaturization of size, simplification of buttons, and reduction of weight.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.4
• /
• pp.275-283
• /
• 2008

Objective: This study was conducted to investigate the effects of the artificial shrinkage and assisted hatching (PZD; patial zona dissetion) before vitrification on the development of vitrified mouse expanding blastocyst. Methods: Mouse 2-cell embryos were collected and cultured in G1.1 and G2.2 to expanding blastocyst. For artificial shrinkage (AS) the micro injection pipette was inserted into blastocoele cavity and blastocoele fluid was aspirated. For assisted hatching (AH) PZD method was used. Control group was -AS/-AH and treatment groups were -AS/+AH, +AS/-AH and +AS/+AH. After AS and AH mouse blastocysts were equillibrated in G10 and G10E20 for 3 mins, respectively, and vitrified in G25E25 after loading on capped pulled-straw. Vitrified mouse blastocysts were thawed and cultured for 24 hrs. The survival and hatching rate was compared among one control and three treatment groups. Results: The survival rates were 99%, 92% in +AS/+AH and +AS/-AH groups and 54%, 58% in -AS/-AH and -AS/+AH group, respectively. The survival rate was significantly higher in +AS group than in -AS group (p<0.01). Hatching rates were 34%, 96% in -AS/-AH and -AS/+AH groups and 41%, 100% in +AS/-AH and +AS/+AH, respectively. The hatching rates was higher in +AH group than in -AH group (p<0.01). After thawing recovery rates were 100%. Loading on capped pulled-straw, that is effective and useful method on vitrification. Conclusion: This study showed that artificial shrinkage of blastocoele cavity and assisted hatching (PZD) significantly improved the development of the vitrified mouse expanding blastocysts.

• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.20-24
• /
• 2010

Background: Fulminant myocarditis is a rare, but life threatening condition. Its prognosis is related with proper management in the acute phase. A cardiopulmonary support device can be very useful in this phase. We report on our experiences with managing acute fulminant myocarditis with a cardiopulmonary support (CPS) device. Material and Method: We reviewed retrospectively 9 patients who had a CPS device used for their fulminant myocarditis between September, 2006 and October, 2008. A Capiox emergency bypass system (Terumo Inc, Tokyo, Japan) was percutaneously inserted in all the patients. Upon implantation, all the patients were in cardiogenic shock because of ventricular arrhythmia or severe left ventricular dysfunction. The mean left ventricular ejection fraction (EF) was $20{\pm}6%$ according to transthoracic echocardiography. Result: 3 patients died despite CPS. The CPS was bridged to a transplanted heart in one patient. The rest were successfully explanted after a mean time of $107{\pm}70$ hours of running. The mean EF after discharge was $56{\pm}7%$ without dilated cardiomyopathy. Conclusion: Fulminant myocarditis can be fatal, but its prognosis is excellent if these patients receive proper, timely treatment. A cardiopulmonary support device can be very useful in this acute period. However, the implantation and management protocol of cardiopulmonary support are not yet settled. Further study is necessary to lower the complications of cardiopulmonary support for patients with fulminant myocarditis.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.61-75
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate change increased and the aging of the existing spillway, it is necessary to establish a plan to utilize an auxiliary spillway to minimize the flood damage of downstream rivers. Most studies have been conducted on the review of flow characteristics according to the operation of auxiliary spillway through the hydraulic experiments and numerical modeling. However, the studies on examination of flood damage in the downstream rivers and the stability of the revetment according to the operation of the auxiliary spillway were relatively insufficient in the literature. In this study, the stability of the revetment on the downstream river according to the outflow conditions of the existing and auxiliary spillway was examined by using 3D numerical model, FLOW-3D. The velocity, water surface elevation and shear stress results of FLOW-3D were compared with the permissible velocity and shear stress of design criteria. It was assumed the sluice gate was fully opened. As a result of numerical simulations of various auxiliary spillway operations during flood season, the single operation of the auxiliary spillway showed the reduction effect of maximum velocity and the water surface elevation compared with the single operation of the existing spillway. The stability of the revetment on downstream was satisfied under the condition of outflow less than 45% of the design flood discharge. However, the potential overtopping damage was confirmed in the case of exceeding the 45% of the design flood discharge. Therefore, the simultaneous operation with the existing spillway was important to ensure the stability on design flood discharge condition. As a result of examining the allocation ratio and the total allowable outflow, the reduction effect of maximum velocity was confirmed on the condition, where the amount of outflow on auxiliary spillway was more than that on existing spillway. It is because the flow of downstream rivers was concentrated in the center due to the outflow of existing spillway. The permissible velocity and shear stress were satisfied under the condition of less than 77% of the design flood discharge with simultaneous operation. It was found that the flood damage of downstream rivers can be minimized by setting the amount allocated to the auxiliary spillway to be larger than the amount allocated to the existing spillway for the total outflow with simultaneous operation condition. However, this study only reviewed the flow characteristics around the revetment according to the outflow of spillway under the full opening of the sluice gate condition. Therefore, the various sluice opening conditions and outflow scenarios will be asked to derive more efficient utilization of the auxiliary spillway in th future.