• Title/Summary/Keyword: 보정 계수

Search Result 1,300, Processing Time 0.038 seconds

Optimization-based calibration method for analysis of travel time in water distribution networks (상수관망 체류시간 분석을 위한 최적화 기반 검·보정 기법)

  • Yoo, Do Guen;Hong, Sungjin;Moon, Gihoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.429-429
    • /
    • 2021
  • 2019년 발생한 인천광역시 붉은 수돗물 사태로 급수구역에 포함된 26만 1천 세대, 63만 5천 명이 직·간접적인 피해를 입은 바 있다. 경제적 피해액으로 추정할 경우 최소 1,280억 원 이상으로 보고된 바 있으며, 이와 같은 상수관망의 수질사고 확산은 장기간 동안 시민의 건강과 생활환경 수준을 저하시킨다. 따라서 상수도시스템의 수질사고확산 모델링 및 방지기술을 통한 수질안전성의 재확인이 필요하며, 이것은 상수도시스템의 지속가능성을 높여 국민이 체감하는 물 환경 수준 제고에 기여가 가능하다. 관망 내 수질해석을 직접적으로 수행하는 모델은 국외적으로 다양하게 개발(PODDS, EPANET-MSX, EPANET2.2 등)된 바 있으나 검·보정을 위한 수질측정 자료 부족 등으로 적용이 제한적이라는 한계가 현재에도 존재한다. 이를 보완하기 위해 수질자료에 비해 그 양이 많고 획득방법이 상대적으로 수월한 수리학적 계측자료 및 해석결과를 활용한 관로 내 체류시간 등을 활용한 연구가 수행된 바 있다. 그러나 이와 같은 수리학적 해석 결과를 활용하는 경우에도 계측자료를 기반으로 한 수리학적 검·보정은 필수적이라 할 수 있다. 본 연구에서는 관로 내 체류시간에 직접적인 영향을 미치는 유량 및 유속자료를 중심으로 수리학적 관망해석의 결과를 최적 검·보정하는 방법론을 제안하였다. 기존 상수관망 수리해석의 검·보정은 일부 지점에서 수압을 측정하고, 수리해석 결과로 도출되는 해당 지점의 수압이 실측된 결과와 유사하도록 관로의 유속계수를 적절히 보정하는 형태로 진행되었다. 그러나 본 연구에서는 관로유량과 유속자료의 목적함수 내 가중치를 수압자료보다 크게 설정하여 체류시간 중심의 검·보정이 수행될 수 있도록 하였으며, 검·보정 대상인자 역시 대수용가의 수요량, 수요패턴, 그리고 관로유속계수로 확장된 모형을 구축하였다. 최적화 기법으로는 메타휴리스틱 기법중 하나인 화음탐색법을 활용하였다. EPANET 2.2 Toolkit과 Visual Basic .Net을 연계하여 프로그래밍하였으며, 개발된 모형을 실제 지방상수도 시스템에 적용하여 분석하였다.

  • PDF

Bootstrap Calibrated Confidence Bound for Variance Components Model (분산 성분 모형에 대한 붓스트랩 보정 신뢰구간)

  • Lee, Yong-Hee
    • The Korean Journal of Applied Statistics
    • /
    • v.19 no.3
    • /
    • pp.535-544
    • /
    • 2006
  • We consider use of Bootstrap calibration in the problem of setting a confidence interval for a linear combination of variance components. Based on the the modified large sample(MLS) method by Graybill and Wang(1980), Bootstrap Calibration is applied to improve the coverage probability of the MLS confidence bound when the experiment is balanced and coefficients of a linear combination are positive. Performance of the proposed confidence bound in small sample is investigated by simulation studies.

The Applicability of KIMSTORM2 for Flood Simulation Using Conditional Merging Method and GPM Satellite Rainfall Data (조건부 합성기법과 GPM 위성강우자료를 이용한 분포형 강우유출모형 KIMSTORM2의 홍수모의 적용성 평가)

  • Kim, Se Hoon;Jung, Chung Gil;Jang, Won Jin;Kim, Seong Joon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.111-111
    • /
    • 2018
  • 본 연구의 목적은 조건부 합성 기법(Conditional Merging, CM) 기법을 활용하여 GPM(Global Precipitation Measurement) 위성 자료를 보정하고, 이를 격자기반 분포형 강우-유출 모형(KIneMatic wave STOrm Runoff Model2, KIMSTORM2)에 적용하여 보정된 자료의 효율성을 검토하는데 있다. 모형의 유출 해석은 남강댐 유역($2,293km^2$)을 대상으로 하였으며, 2016년 10월에 발생한 태풍 차바에 대하여 GPM 자료와 CM 기법을 적용한 GPM 자료를 각각 활용하여 결과를 비교하였다. 이 때, 강우자료의 보정은 유역 내 위치한 21개 지점의 지상강우자료를 활용하였으며, 각각의 위성강우자료에 유출 검보정은 남강댐 유역 내 3개의 수위관측 지점(산청, 창촌, 남강댐)을 대상으로 실시하였다. 유출 결과는 결정계수(Coefficient of determination, $R^2$), 모형 효율성 계수(Nash-Sutcliffe efficiency, NSE) 및 유출용적지수(Volume conservation index, VCI)를 이용하여 산정하였다. 지상강우자료와 CM 기법을 통해 보정한 강우자료는 대기의 많은 영향을 받는 위성자료의 특성을 보정하여 공간유출 및 첨두유출을 합리적으로 재현할 수 있을 것으로 예상된다.

  • PDF

The Correction Factor of Sensitivity in Gamma Camera - Based on Whole Body Bone Scan Image - (감마카메라의 Sensitivity 보정 Factor에 관한 연구 - 전신 뼈 영상을 중심으로 -)

  • Jung, Eun-Mi;Jung, Woo-Young;Ryu, Jae-Kwang;Kim, Dong-Seok
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.12 no.3
    • /
    • pp.208-213
    • /
    • 2008
  • Purpose: Generally a whole body bone scan has been known as one of the most frequently executed exams in the nuclear medicine fields. Asan medical center, usually use various gamma camera systems - manufactured by PHILIPS (PRECEDENCE, BRIGHTVIEW), SIEMENS (ECAM, ECAM signature, ECAM plus, SYMBIA T2), GE (INFINIA) - to execute whole body scan. But, as we know, each camera's sensitivity is not same so it is hard to consistent diagnosis of patients. So our purpose is when we execute whole body bone scans, we exclude uncontrollable factors and try to correct controllable factors such as inherent sensitivity of gamma camera. In this study, we're going to measure each gamma camera's sensitivity and study about reasonable correction factors of whole body bone scan to follow up patient's condition using different gamma cameras. Materials and Methods: We used the $^{99m}Tc$ flood phantom, it recommend by IAEA recommendation based on general counts rate of a whole body scan and measured counts rates by the use of various gamma cameras - PRECEDENCE, BRIGHTVIEW, ECAM, ECAM signature, ECAM plus, IFINIA - in Asan medical center nuclear medicine department. For measuring sensitivity, all gamma camera equipped LEHR collimator (Low Energy High Resolution multi parallel Collimator) and the $^{99m}Tc$ gamma spectrum was adjusted around 15% window level, the photo peak was set to 140-kev and acquirded for 60 sec and 120 sec in all gamma cameras. In order to verify whether can apply calculated correction factors to whole body bone scan or not, we actually conducted the whole body bone scan to 27 patients and we compared it analyzed that results. Results: After experimenting using $^{99m}Tc$ flood phantom, sensitivity of ECAM plus was highest and other sensitivity order of all gamma camera is ECAM signature, SYMBIA T2, ECAM, BRIGHTVIEW, IFINIA, PRECEDENCE. And yield sensitivity correction factor show each gamma camera's relative sensitivity ratio by yielded based on ECAM's sensitivity. (ECAM plus 1.07, ECAM signature 1.05, SYMBIA T2 1.03, ECAM 1.00, BRIGHTVIEW 0.90, INFINIA 0.83, PRECEDENCE 0.72) When analyzing the correction factor yielded by $^{99m}Tc$ experiment and another correction factor yielded by whole body bone scan, it shows statistically insignificant value (p<0.05) in whole body bone scan diagnosis. Conclusion: In diagnosing the bone metastasis of patients undergoing cancer, whole body bone scan has been conducted as follow up tests due to its good points (high sensitivity, non invasive, easily conducted). But as a follow up study, it's hard to perform whole body bone scan continuously using same gamma camera. If we use same gamma camera to patients, we have to consider effectiveness of equipment's change by time elapsed. So we expect that applying sensitivity correction factor to patients who tested whole body bone scan regularly will add consistence in diagnosis of patients.

  • PDF

Estimate of Bolt Connection Strength of Reinforced Glulam using Glass Fiber (유리섬유 보강집성재 볼트 접합부 전단내력 예측)

  • Kim, Keon-ho;Hong, Soon-il
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.1
    • /
    • pp.67-74
    • /
    • 2016
  • The yield shear strength of bolt connection in glass fiber reinforced glulam was predicted using a design-based equation, and was compared to the empirical yield shear strength. For the predicted equation, the mechanical properties of member (the elastic modulus, Poisson's ratio, shear modulus) was tested. The fracture toughness factor ($K_{ft}$) of glass fiber reinforced glulam was reflected to the revision of the design equation of bolted connection. The compressive strength properties to grain direction was influenced by annual ring angle and width of lamina. Compared with the revised yield shear strength of reinforced glulam, it was tended to be similar to the empirical yield shear strength on the diameter of bolt and the reinforcements. The revised yield shear strength from proposed formula of KBC was most appropriately matched in the bolt connection of the glass fiber reinforced glulam.

Capacity and Saturation Flow Rate of Permissive Left-Turn Lane: in case for the Exclusive Use of Permissive Left-Turn Movements (비보호(非保護) 좌회전(左回轉)의 간격수락(間隔受諾)과 용량(容量) 및 보정계수(補整係數)에 관한 연구)

  • Do, Cheol Ung
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.6
    • /
    • pp.1273-1279
    • /
    • 1994
  • There are 3 cases that only permissive left-turn(PLT) vehicles use the possible lane for PLT. In these cases, left turn and through movements can not be included in the same lane group, hence saturation flow rate and left turn adjustment factor of PLT are obtained separately from through movement. In capacity analysis procedures at signalized intersection with PLT phasing, PLT capacity should be known to discriminate among 3 cases stated above. The capacity is directly used not only to get saturation flow rate and left turn adjustment factor, but as a threshold for the feasibility of PLT control. This study calculated through field data the critical gap and minimum headway of left turn which affect the PLT capacity. The capacity was obtained by using theoretical models, which consequently could be used to calculate the saturation flow rate and left turn adjustment factor.

  • PDF

Provincial Road in National Highway Traffic Volume Variation According to Rainfall Intensity (강우 강도에 따른 일반국도 지방부 도로의 교통량 변동 특성)

  • Kim, Tae-Woon;Oh, Ju-Sam
    • The Journal of the Korea Contents Association
    • /
    • v.15 no.3
    • /
    • pp.406-414
    • /
    • 2015
  • Existing relative researches for traffic were studied under favorable weather or excluding impact of weather. This study present traffic volume variation according to rainfall intensity in national highway provincial road and rainfall-factor. Continuous traffic count section match AWS after selecting to analyze provincial road 256 section. Weekdays ADT(Average Daily Traffic) and rainfall-factor are influenced by rainfall a little because of business travel. But non-weekdays ADT and rainfall-factor are influenced much more than weekdays because of leisure travel. Estimated AADT(Annual Average Daily Traffic) by adjusting rainfall-factor is lower MAPE than non-adjusting rainfall factor. So, rainfall have to be considered when estimating AADT. ADT decrease according to rainfall intensity, continuous studies considered rainfall intensity are needed when road design and operation.

Impact Factor Analysis of Response Adjustment Factor of PSC Composite Bridge Using Optical Fiber Sensor (광섬유 센서를 이용한 PSC 합성형교의 응답보정계수 영향인자 분석)

  • Kim, Ho Sun;Jang, Hwa Sup;Yang, Dong Woon
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.16 no.1
    • /
    • pp.35-43
    • /
    • 2012
  • In general, load carrying capacity, one of the load & resistance capacities in bridges, has more margins than the load carrying capacity evaluated with theoretical methods, unless there are severe damages, defects or material deterioration phenomena that can have a great impact on the behavior of bridges. However, errors have been already included in the current processes of loading tests and structural analysis for measuring load carrying capacity, thus devaluing the reliability of response adjustment factor. Therefore, this study found out the problems of existing electric resistance strain and displacement sensors in sensor suite to solve the problems with sensors and the errors in the appropriateness of structural analysis model, thereby leading to the changes into an optical fiber smart sensor with excellent performance. Besides, the study attempted to ensure the accuracy of response adjustment factor by selecting the optimal models through the interpretation of various structural analysis models.

Calculation of correction coefficients for the RedEdge-MX multispectral camera through intercalibration with a hyperspectral sensor (초분광센서와의 상호교정을 통한 RedEdge-MX 다분광 카메라의 보정계수 산출)

  • Baek, Seungil;Koh, Sooyoon;Kim, Wonkook
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.38 no.6
    • /
    • pp.707-716
    • /
    • 2020
  • Spectroradiometers have recently been drawing great attention in earth observing communities for its capability for obtaining target's quantitative properties. In particular, light-weighted multispectral cameras are gaining popularity in many field domains, as being utilized on UAV's. Despite the importance of the radiometric accuracy, studies are scarce on the performance of the inexpensive multispectral camera sensors that have various applications in agricultural, vegetation, and water quality analysis. This study conducted assessment of radiometric accuracy for MicaSense RedEdge-MX multispectral camera, by comparing the radiometric data with an independent hyperspectral sensor having NIST-traceable calibration quality. The comaprison showed that radiance from RedEdge-MX is lower than that of TriOS RAMSES by 5 to 16% depending on the bands, and the irradiance from RedEdge-MX is also lower than RAMSES by 1~20%. The correction coefficients for RedEdge-MX alculated through the 1-st and the 3-rd order regression analysis were presented as a result of the study.

Verification of the complementary relationship of areal evapotranspiration in Yongdam Dam basin using evapotranspiration flux data (증발산 플럭스관측을 이용한 용담댐 유역 보완관계 검증)

  • Kim, Eunji;Kang, Boosik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.474-474
    • /
    • 2021
  • 물순환 과정에서의 증발산량은 필수적으로 고려해야 하는 요소이며, 증발산은 기상학적 인자뿐만 아니라 증발 표면 특성 등 복합적인 요인에 의해서 발생한다. 이러한 이유로 실제증발산의 절대량을 추정하는 것은 쉽지 않으며, 특히 수문학적 관점에서 유역단위의 증발산량을 산정하는 데에는 기술적인 한계가 존재한다. 반면 잠재증발산량과 실제증발산량의 보완관계가설을 활용하면 복잡한 수문모델링을 거치지 않고 팬증발량으로부터 유역의 실제증발산을 산정할 수 있다. 본 연구에서는 관측자료를 기반으로 하여 용담댐 유역의 증발산 보완관계를 검증하고자 한다. 실제증발산량(ETA)은 용담댐 내 덕유산 플럭스 타워의 관측자료를 활용하였으며, 잠재증발산량(ETP)으로는 기상관측소에서 관측한 팬 증발량 자료를 활용하였고 습윤증발산량(ETW)은 Priestley-Taylor 공식을 통해 산정하였다. ETW는 수분이 무제한 공급되는 상황에서의 증발산량으로 정의되며, 동시에 ETA 및 ETP와의 상대적 비율로 스케일화하여 보완관계설정에 활용하였다. 대기의 습윤지수(Moisture Index, MI)는 ETA와 ETP간의 상대적 비율로 정의하였다. 이 때 팬 증발량은 기상 및 주변 환경 조건의 영향을 받아 증발량이 과대추정 되는 경향이 있으므로 보정계수를 적용하여 보정한 값을 활용하였다. 보정계수는 FAO Penman-Monteith 식을 활용한 기준증발산량과 팬 증발량의 기울기로 산정하며, 본 연구에서는 보정계수로 0.77을 사용하였다. 또한 ETW 산정 시 적용되는 Priestley-Talyor 계수(α)는 널리 알려진 값인 1.26 대신 유역의 기상조건을 고려하여 0.99를 적용하였다. α 값의 조정을 통해 증발산 보완관계에 대한 E+의 평균 제곱근 오차(RMSE)가 0.685에서 0.075, Ep+의 경우 0.437에서 0.315로 개선되어 용담댐 유역의 증발산 보완관계가 만족할 만한 수준으로 확인되었다.

  • PDF