• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.455-455
• /
• 2017

최근 기후변화로 인한 도시홍수 피해가 증가하고 있다. 이에 따라 본 연구에서는 기상청에서 제공하는 HadGEM3-RA의 한반도(12.5km) 기후변화 RCP 4.5 및 RCP 8.5시나리오에 대해 편의보정 및 시간상세화를 실시하여 기후변화를 고려한 수문분석을 하였다. 기후변화 시나리오의 편의보정은 Gamma분포를 이용한 모수적 분위사상법과 관측자료의 누가확률분포를 이용하는 비모수적 분위사상법으로 수행하였으며, 관측된 분 단위 강우자료를 기반으로 기후변화 시나리오 미래기간에 대해 시간상세화를 실시하였다. 또한, 도림천유역을 중심으로 기후변화 시나리오 미래기간의 확률강우량과 설계홍수량을 산정하였다. 본 연구에 결과는 수문분석을 위한 기후변화 시나리오 시간상세화 방안에 크게 기여 할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1221-1225
• /
• 2010

본 연구에서는 스프레드시트를 기반으로 하는 Microsoft EXCEL의 VBA(Visual Bafor Application)를 이용하여, 빗물 유출수 관리가 필요한 지역을 결정하고, 해당 유역에 적용가능한 관리방안을 선정하며, 관리방안 적용에 따른 효과를 분석할 수 있는 시스템을 개발하였다. 모형의 검보정이 완료된 SWAT 모형의 결과를 이용하였으며, 비구조적 관리방안은 모형의 매개변수 및 입력자료 수정을 통해 효과를 분석하였다. 구조적 관리방안은 각 관리방안의 최대 집수면적 및 각 오염물질 별 제거효율을 이용하여 관리방안 효과를 분석하였다. 각 관리방안의 설계규모는 최대 배수면적과 이를 바탕으로 산정된 수질처리용량으로부터 결정하였다.

• Journal of Korea Multimedia Society
• /
• v.12 no.2
• /
• pp.300-312
• /
• 2009

An indoor location-based service cannot be realized unless the indoor positioning problem is solved. However, the cost-effective indoor positioning systems are suffering from their inaccurateness. This paper proposes a map information-based correction method for the indoor positioning systems. Using our Kalman filter with map information-based appropriate parameter values, our method estimates the track of the moving object, then it performs the Frechet Distance-based map matching on the obtained track. After that it applies our real time correction method. In order to verify efficiency of our method, we also provide our test results.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.18-26
• /
• 2015

Geometric distortion and shadow effect due to capturing angle could be included in document copy images that are captured by a camera in stead of a scanner. In this paper, a clean black and white document image generation algorithm by distortion correction and shadow elimination based on a camera, is proposed. In order to correct geometric distortion such as straightening un-straight boundary lines occurred by camera lens radial distortion and eliminating outlying area included by camera direction, second derivative filter based document boundary detection method is developed. Black and white images have been generated by adaptive binarization method by eliminating shadow effect. Experimental results of the black and white document image generation algorithm by recovering geometrical distortion and eliminating shadow effect for the document images captured by smart phone camera, shows very good processing results.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.429-435
• /
• 2006

A preliminary study was made for density correction for the effect of separation between sonde and borehole wall due to the existence of casing in a borehole. Firstly, series of gamma-gamma measurements were obtained with 3 different separations in 3 different density models constructed in Kangwon National University. Secondly, density correction charts were made based on the 'spine and ribs' technique in mud cake correction. Using these charts, we could determine effectively the true density from the measurement in the thinly cased borehole.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.137-144
• /
• 2008

The stand-off errors due to the different separations between the sonde and the borehole wall were measured and analyzed in 4 physical borehole models located in Kangwon National University having different densities with cylindrical and half cylindrical PVC and/or acrylic casings. The analysis of the stand-off error data based on the "spine and ribs" technique suggests a well defined rib line for each model irrespectively of the types and thicknesses of the casing, and that the gradients of the ribs are proportional to the densities of the models. By using these characteristics successful density correction could be made for the plastic casings in NX sized boreholes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.637-643
• /
• 2019

Wind tunnel testing for flow-through model is necessary for performance prediction of an aircraft with air-breathing jet engine. Internal drag correction and wall correction are performed to acquire preciser wind tunnel test data. Many test runs are generally required to correct internal drag and wall interference in wind tunnel test. In this study we investigated more effective correction schemes using the response surface method. Even though the number of tests required for these schemes was much smaller than that for conventional methods, the differences between corrections using these schemes and conventional methods were similar level with the uncertainty of measurement except for the data near the boundaries.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.49-59
• /
• 2001

In the transportation planning process, origin and destination(O-D) trip matrix is one of the most important elements. There have been developments and applications of the methodology to adjust old matrices using link traffic counts. Commonly, the accuracy of an adjusted O-D matrix depends very much on the reliability of the input data such as the numbers and locations of traffic counting points in the road network. In the real application of the methodology, decisions on the numbers and locations of traffic counting points are one of the difficult problems, because usually as networks become bigger, the numbers of traffic counting points are required more. Therefore, this paper investigates these issues as an experiment using a nationwide network in Korea. We have compared and contrasted the set of link flows assigned by the old and the adjusted O-D matrices with the set of observed link flows. It has been analyzed by increasing the number of the traffic counting points on the experimental road network. As a result of these analyses, we can see an optimal set of the number of counting links through statistical analysis, which are approximately ten percentages of the total link numbers. In addition, the results show that the discrepancies between the old and the adjusted matrices in terms of the trip length frequency distributions and the assigned and the counted link flows are minimized using the optimal set of the counted links.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.297-303
• /
• 2014

The effect of solar irradiance has been used to estimate daily maximum temperature, which make it possible to reduce the error inherent to lapse-rate based elevation difference correction in mountainous terrain. Still, recent observations indicated that the effect of solar radiation would need correction for estimation of daily maximum temperature. It was attempted to examine what would cause the variability of solar irradiance effect in determination of daily maximum temperature under natural field conditions and to suggest improved methods for estimation of the temperature distribution over mountainous regions. Temperature at 1500 and the wind speed for 1100 to 1500 were obtained at 10 validation sites with various topographical features including slope and aspect within a mountainous $50km^2$ catchment for 2012-2013. Lapse-rate corrected temperature estimates on clear days were compared with these observations, which would represent the differential irradiance effect among sloped surfaces. Results indicated a negative correlation between the mean wind speed and the estimation error. A simple scheme was derived from relationship between wind speed and estimation error for daily temperature to correct the effect of solar radiation. This scheme was incorporated into an existing model to estimate daily maximum temperature based on the effect of solar radiation. At 10 validation sites on clear days, estimates of 1500 LST temperature with and without the correction scheme were compared. It was found that a substantial improvement was achieved when the correction scheme was applied in terms of bias correction as well as error size reduction at all sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1739-1750
• /
• 2012

This study was to develop the assessment of medical service outcome using administration data through compared with hospital standardized mortality ratios(HSMR) in various hospitals. This study analyzed 63,664 cases of Hospital Discharge Injury Data of 2007 and 2008, provided by Korea Centers for Disease Control and Prevention. We used data mining technique and compared decision tree and logistic regression for developing risk-adjustment model of in-hospital mortality. Our Analysis shows that gender, length of stay, Elixhauser comorbidity index, hospitalization path, and primary diagnosis are main variables which influence mortality ratio. By comparing hospital standardized mortality ratios(HSMR) with standardized variables, we found concrete differences (55.6-201.6) of hospital standardized mortality ratios(HSMR) among hospitals. This proves that there are quality-gaps of medical service among hospitals. This study outcome should be utilized more to achieve the improvement of the quality of medical service.