• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.226-243
• /
• 1997

The Odesan Gneiss Complex consists of mainly migmatitic gneiss and porphyroblastic gneiss with locally intercated quartzite, amphibolite, marble and leucocratic gneiss. At least two different regional metamorphisms are recognized in the study area. Metamorphic grade of the first metamorphism increases from the K-feldspar-muscovite zone(in which biotite-muscovite-plagioclase-quartz and garnet-biotite-muscovite-K-feldspar-plagioclase-quartz assemblages occur) in the east and southwestern part of the study area to the K-feldspar-garnet zone(in which garnet-biotite-K-feldspar-plagioclase-quartz, biotite-K-feldspar-plagioclase-quartz, garnet-biotite-K-feldspar-plagioclase-sillimanite-spinel-quartz assemblages occur) in the northwestern part. Kyanite is found as inclusions in plagioclase. The second metamorphism is characterised by occurrence of cordierite. The metamorphic grade of 2nd metamorphism decreases radically from the central-western part near Gaeinsan in which cordierite-garnet-sillimanite-biotite-muscovite-quartz, cordierite-garnet-spinel-sillimanite-biotite-muscovite-quartz assemblages representing the garnet-cordierite zone are observed. The garnet-cordierite zone is surrounded by the sillimanite-cordierite zone which shows cordierite-sillimanite-biotite-plagioclase, cordierite-muscovite-biotite-plagioclase and sillimanite-muscovite-biotite-plagioclase assemblages. The peak metamorphic P-T conditions of the first metamorphism calcuted from garnet-biotite-sillimanite-K-feldspar-plagioclase-spinel assemblage are 5.4~7.4 kb and $776-789^{\circ}C$. Real P-T condition of the first metamorphism might be higher than the calcuated P-T condition according to the study based on the phase equilibria. P-T conditions calcuated from the garnet-biotite in plagioclase are 12.5kb and $650^{\circ}C$ which indicate that the P-T path of the first metamorphism had passed a high pressure condition before the peak metamorphic temperature condition. The peak metamorphic P-T conditions of the second metamorphism calcuated from garnet-biotite-cordierite-spinel-quartz assemblage are $680~750^{\circ}C$ at pressures lower than 6 kb. In the Odesan Gneiss Complex, the first metamorphism of medium pressure and high temperature had occurred after the high pressure condition and fast uplift and then the second metamorphism of low pressure condition occurred after sedimentation of the Kuryong Group.

• Journal of the Korean Society for information Management
• /
• v.24 no.4
• /
• pp.267-283
• /
• 2007

In this study, measures of distributional similarity such as KL-divergence are applied to cluster documents instead of traditional cosine measure, which is the most prevalent vector similarity measure for document clustering. Three variations of KL-divergence are investigated; Jansen-Shannon divergence, symmetric skew divergence, and minimum skew divergence. In order to verify the contribution of distributional similarities to document clustering, two experiments are designed and carried out on three test collections. In the first experiment the clustering performances of the three divergence measures are compared to that of cosine measure. The result showed that minimum skew divergence outperformed the other divergence measures as well as cosine measure. In the second experiment second-order distributional similarities are calculated with Pearson correlation coefficient from the first-order similarity matrixes. From the result of the second experiment, secondorder distributional similarities were found to improve the overall performance of document clustering. These results suggest that minimum skew divergence must be selected as document vector similarity measure when considering both time and accuracy, and second-order similarity is a good choice for considering clustering accuracy only.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2003

The purpose of this study was to investigate variabilities in green moisture content, specific gravity and shrinkage in the stems of a Larch(Larix leptolepis) to provide fundamental information for technical processes. There were significant differences in green moisture contents, specific gravity and shrinkage between heratwood and sapwood. The green moisture content was correlated negatively with the height in the sapwood. On the other hands, in the heratwood, there was a positive correlation between moisture content and the height. There were no significant differences in specific gravity between south-bound and north-bound directions in both heartwood and sapwood. There were no significant differences in specific gravity due to the height in sapwood, but significant differences were foundin heartwood. There were no significant differences in shrinkage between south-bound and north-bound directions, and due to the height in most of heartwood and sapwood. However, shrinkage in north-bound direction was higher than that of in the south-bound direction in some sapwoods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1006-1013
• /
• 2008

CZZ (Concatenated Zigzag) Code is a class of fast encodable LDPC codes. In the case that LDPC codes including CZZ codes have short length, short cycles seriously affect the code performance. In this paper, we construct CZZ codes using various degree-2 polynomial interleavers which eliminate cycles of length 4 and through simulation, compare the performance of these CZZ codes and turbo codes in many different fading channels. Especially, quasi-static fading channel, block fading channel, uncorrelated fading channel, and correlated fading channel are considered. Since CZZ codes show similar performance as turbo codes, they can be used in the next generation wireless communication systems.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.804-811
• /
• 2011

The aim of this study is to evaluate the applicability of adsorption models for understanding adsorption properties of adsorbents. For this study, the adsorption charateristics of $NO_3^-$ by commercial anion exchange resin, PA-308, were investigated in bach process. The adsorption kinetic data for $NO_3^-$ by anion exchange resin showed two stage process comprising a fast initial adsorption process and a slower second adsorption process. Both the pseudo-first-order kinetic model and the pseudo-second-order kinetic model could not be used to predict the adsorption kinetics of $NO_3^-$ onto anion exchange resin for the entire sorption period. Only the fast initial portion ($t{\leq}20min$) of adsorption kinetics was found to follow pseudo-first-order kinetic model and controlled mainly by external diffusion that is very fast and high, whereas, the slower second portion (t > 20 min) of adsorption kinetics seems to be controlled by a second-order chemical reaction and by intraparticle diffusion.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.63.3-64
• /
• 2020

수소 라이먼 알파선은 관측이 어려운 외부은하의 성간 물질이나 성운 주위의 물질의 운동학적, 기하학적 상태를 알려주는 지표이다. 특히 라이먼 알파 방출 스펙트럼의 두 최고점에서 측정한 선속도 차이는 물질의 수축, 팽창 여부에 영향을 받기 때문에 은하의 역학적 특성을 연구하는 데에 있어 새로운 도구로서 각광받고 있다. 관측에서 얻어지는 은하들의 선속도 차이는 100km/s에서 800km/s까지 넓은 영역에서 존재한다. 선행 분자구름 규모의 연구에서 얻어진 선속도 차이는 상대적으로 작은 선속도 차이(148.54km/s)를 가진다. 그래서 이 연구에서는 더 큰 규모인 은하에서 라이먼 알파 선속도 차이를 확인하고 은하내 물리량의 영향을 알아보았다. 이 연구에서는 복사유체역학 시뮬레이션 코드 RAMSES-RT를 활용한, 각각 다른 물리량을 가진 은하 시뮬레이션 결과를 활용하였다. 은하 내 가스의 비율, 금속함량비를 다르게 하였으며, 각 시뮬레이션들은 몬테- 카를로 공진선 복사전달 코드 RASCAS를 이용하여 라이먼 알파선의 복사 과정을 계산하였다. 첫 번째로 기준 은하 시뮬레이션과 분자구름 시뮬레이션(Kimm+19)의 결과를 비교한 결과 148.54km/s에서 221.76km/s로 선속도 차이의 평균 값이 상승한 것을 확인하였다. 이는 성간 물질의 존재 유무의 차이로 인한 것이다. 은하 내 가스의 금속함량비를 증가시킨 경우, 은하 내 먼지량과 젊은 별들이 별 생성 구름에 머무는 시간이 증가하기 때문에 기준 은하와 비교하여 선속도 차이가 작아졌다.(206.9km/s) 반면 은하의 가스량을 증가시켯을 때는 산란 횟수 증가로 인한 상대적으로 큰 선속도 차이(298.51km/s)를 확인할 수 있었다. 또한 기준은하에 대해, 난류의 효과를 포함하여 선속도 차이를 비교한 결과, 선속도 차이는 (308.8km/s)상승하였다. 이를 통해 성간 물질의 물리량 차이만으로는 400km/s 이상의 큰 선속도 차이를 만드는 것은 어렵다. 관측에서 보이는 400km/s 이상의 몇몇 큰 선속도 차이의 은하를 위해서는 이 시뮬레이션에 포함되지 않은 성운 주위의 물질과 같은 부분이나, 은하 합병과 같은 극한의 상황이 필요할 것이다.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.18-25
• /
• 2005

We derive refraction statics for seismic data recorded in a hard rock terrain, in which there are large and rapid variations in the depth of weathering. The statics corrections range from less than 10 ms to more than 70 ms, often over distances as short as 12 receiver intervals. This study is another demonstration of the importance in obtaining accurate initial refraction models of the weathering in hard rock terrains in which automatic residual statics may fail. We show that the statics values computed with a simple model of the weathering using the Generalized Reciprocal Method (GRM) and the Refraction Convolution Section (RCS) are comparable in accuracy to those computed with a more complex model of the weathering, using least-mean-squares inversion with the conjugate gradient algorithm (Taner et al., 1998). The differences in statics values between the GRM model and that of Taner et al. (1998) systematically vary from an average of 2ms to 4ms over a distance of 8.8 km. The differences between these two refraction models and the final statics model, which includes the automatic residual values, are generally less than 5 ms. The residuals for the GRM model are frequently less than those for the model of Taner et al. (1998). The RCS statics are picked approximately 10 ms later, but their relative accuracy is comparable to that of the GRM statics. The residual statics values show a general correlation with the refraction statics values, and they can be reduced in magnitude by using a lower average seismic velocity in the weathering. These results suggest that inaccurate average seismic velocities in the weathered layer may often be a source of short-wavelength statics, rather than any shortcomings with the inversion algorithms in determining averaged delay times from the traveltimes.

• Journal of Korean Foot and Ankle Society
• /
• v.1 no.1
• /
• pp.5-11
• /
• 1997

Multiple surgical procedures for the correction of hallux valgus have been described. The surgical algorithm is based on the degree of deformity, patient's age, and the presence or absence of arthritis. It is known that the role of an isolated distal soft-tissue procedure is limited and the procedure must be used in conjunction with the proximal metatarsal osteotomy to correct most hallux valgus. We reviewed retrospectively the clinical & radiological results of distal soft-tissue procedure with or without proximal metatarsal osteotomy, performed in 18 patients (29 cases ) who had mild to moderate degrees af hallux valgus deformity. The results were as follows : In 20 cases with isolated soft-tissue procedures, the preoperative hallux valgus angle (HV) averaged 30.6 degrees and the postoperative HV averaged 7.3 degrees. The preoperative intermetatarsal angle (IM) averaged 12.5 degrees and postoperative IM averaged 10.4 degrees. 2. In 9 cases with the proximal metatarsal osteotomy added, the preoperative HV averaged 32.5 degrees, and the postoperative HV averaged 8.0 degrees. The preoperative IM averaged 12.5 degrees, and postoperative IM averaged 10.1 degrees. 3. There was no significant difference of loss of correction, presence of complication, patients own satisfaction, between two groups. In conclusion, as for the patients with mild to moderate degrees of hallux valgus deformities, the clinical and radiological results following distal soft tissue procedure and proximal metatarsal osteotamy are not proved to be superior to those following isolated soft-tissue procedures.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.11a
• /
• pp.91-97
• /
• 2003

본 연구는 온라인 게임공간에서 게이머들이 어떻게 서로 다른 가치관과 행동 패턴을 드러내는지를 확인하고 이를 통해 온라인 게임세계의 문화를 이해하고 분석하기 위해 실시되었다. 전 세계에서 가장 많은 게이머들이 활동하고 있고, 한국과 일본에서 동시에 서비스되고 있는 온라인 게임인 〈리니지〉의 게이머들을 대상으로 온라인 설문조사를 실시하여 '라이프 스타일' 분석틀을 이용해서 이들이 게임공간에서 보이는 행동을 분류하였다. 글 결과 한국과 일본의 리니지 사용자들에게서 거의 유사한 세 가지 라이프스타일 패턴이 추출되었으며 한국과 일본에서 라이프스타일에 따른 행동 패턴이 일관적으로 나타나고 있음을 확인하였다. 도한 한국과 일본의 문화적 차이는 각 라이프스타일 프로파일의 극단성과 분포비율에 의해 반영되는 것으로 확인되었다. 일본의 탈사회적 게이머는 한국의 그것에 비해 더 극단적인 반면 전체 응답자 중에서 차지하는 비율이 적었고 게임 세계에서의 사회 경제적 위치도 낮았으며 한국에서는 비교적 적은 비율을 차지하던 싱글 플레이어 유형이 일본에서는 가장 많은 비중을 차지하는 것으로 나타났다. 또한 일본의 게이머들은 라이프스타일에 상관없이 대부분이 게임 공동체에 가입하는 반면 한국의 게이머들은 라이프스타일에 따라 공동체 참여율이 달랐지만 전체적인 참여율은 일본에 비해 높았다. 이러한 차이는 일본 게임세계에서 공동체 참여는 기본적인 의무인 반면 한국에서는 현실적인 이익과 직결된 활동임을 시사한다. 또한 게임몰입수준은 한국보다 일본의 리니지 게이머들이 높았다. 아시아 각 국에 한국에서 개발한 동일한 온라인 게임이 확산되어 있는 현황을 고려할 때, 온라인 게이머의 라이프스타일 척도는 한국과 일본뿐만 아니라 대만과 중국, 홍콩, 그리고 미국과 같은 리니지 게임이 서비스되는 모든 국가의 문화적 차이를 이해하고 과학적으로 분석할 수 있는 방법이 될 수 있을 것으로 기대된다. 의미를 되새기는 것으로 짧은 연구를 시작하겠다. 등은 활성 값이 70% 이상으로 퇴적물 독성이 상대적으로 낮았다. 이중나선 DNA 함량은 28.4 % - 49%로 대조군에 비해서 감소가 크다. 대부분의 정점이 대조군의 30% 내외로 정점 간의 차이는 크지는 않다. 그러나 다른 측정자료와 같이 정점 22에서 18%로 최소치를 나타내고, 정점 2, 12에서 20% 내외의 값을 보인다. 종합적으로 볼 때 오염물질의 유입이 크고, 광양제철 인근 정점 들이 모두 다른 정점에 비해서 낮아서, 퇴적물 독성이 높은 정점으로 조사되었다.hiwo의 광합성 능력은 낮은 농도들에서는 대조구와 유사하였으나, 5 $\mu\textrm{g}$/l의 높은 농도에서는 초기에 매우 낮은 광합성 능력을 보이다가 시간이 경과하면서 대조군보다 더 높은 경향을 나타냈다. 이러한 결과는 식물플랑크톤이 benso[a]pyrene의 낮은 농도에서 노출될 때는 이 물질을 탄소원으로 사용할 가능성이 있음을 시사한다. 본 연구의 결과들은 연안해역에 benso[a]pyrene과 같은 지속성 유기오염물질이 유입되었을 때 내정여부에 따라 식물플랑크톤 군집내 종 천이와 일차생산력에 크게 영향을 미칠 수 있음을 시사한다.TEX>5.2개)였으며, 등급별 회수율은 각각 GI(8.5%), GII(13.4%), GIII(43.9%), GIV(34.2%)로 나타났다.ments of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.3
• /
• pp.251-260
• /
• 2003

A three dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of deep, tapered rods and beams with circular cross section. Unlike conventional rod and beam theories, which are mathematically one-dimensional (1-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sup r/, u/sub θ/ and u/sub z/, in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in , and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the rods and beams are formulated, the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rods and beams. Novel numerical results are tabulated for nine different tapered rods and beams with linear, quadratic, and cubic variations of radial thickness in the axial direction using the 3D theory. Comparisons are also made with results for linearly tapered beams from 1-D classical Euler-Bernoulli beam theory.