• Journal of Korea Game Society
• /
• v.9 no.2
• /
• pp.115-123
• /
• 2009

This paper proposes an algorithm to improve the performance of the spatial partitioning method for flocking behaviors. The core concept is to improve the performance by using the fact that even if a moving entity, boid in flock continuously changes its direction and position, its k-nearest neighbors, kNN to effect on decision of the next direction is not changed frequently. From the previous kNN, the method to check whether new kNN is changed or not is proposed in this paper and then the correctness of the proposed method is proved by two theorems. The proposed algorithm was implemented and its performance was compared with the conventional spatial partitioning method. The results of the comparison show that the proposed algorithm outperforms the conventional one by about 30% with respect to the number of frames per a second.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.199-207
• /
• 1996

In the past decade soft clay shield tunneling technology have been improved to permit continuous support to the face of a tunnel. These advanced shield can be operated such that an initial heaving is created, this helps to decrease the inward soil movement into the tail void. In this paper, the measurement of slurry shield and EPB shield were used and two dimensional elasto-plastic programs EPSHILD developed for shield tunnel analysis were approved. The excavation steps corresponding with construction stages were settled and heaving load, load factors were considered. This study is based on the instantaneous settlement which is occured in the process of shield construction but not the secondary settlement by consolidation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.112-117
• /
• 2004

This paper describes the analysis of the UHF signal characteristics due to the partial discharge sources which can exist in a GIS. For the experiment, a model GIS was made and 5 types of discharge source were created as follows; corona discharge, surface discharge, void discharge, discharge due to free particle, discharge from floating electrode. The frequency spectra and the phase characteristics of UHF signals were induced by UHF signal analysis. The results were quantified to systematically adapt to analyze the PD sources in the GIS and utilized as algorithm data based on the neural network for Back-Propagation Algorithm with a multi-layer structure. The perception rate of the constructed algorithm showed approximately 94[%] and 82[%] in learning and testing data, respectively.

• Korean Institute of Interior Design Journal
• /
• v.17 no.1
• /
• pp.77-83
• /
• 2008

MVRDV is most important architect as created interesting architectural space in contemporary architecture, and so they applies to the unique theory in their architecture. They used to architectural diagram, program, datascape, density as a design tool. Especially, they have create new architectural space and form in using architectural diagram, program, datascape, density, and void. So, this study is purposed to explain how they use as architectural tool to make composition of it's architectural space and is purpose to explain what is their main concept in architectural space. MVRDV's architectural space has fundamental methodology. That is Datascape on uncertainty and continuity between urban space and architectural space. The former consist in using diagram and architectural program and the latter consist in operating architectural void and inner continuity surface. The conclusion is follows 1. The mode of spacial composition by architectural void is correspond density of city as MVRDV's architectural thinking. 2. The mode of spacial composition by architectural program is ambiguous to the boundary between inner and exterior space by transparency. 3. The mode of spacial composition by architectural diagram make to generate the architectural form and space, through the reinterpretation and relocation of architectural program. 4. The mode of spacial composition inner continuity plane is make relative between site and inner space.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.579-588
• /
• 2003

There are many unfavorable conditions that lead to shortening life of cable by causing dielectric breakdown and aging such as field concentrations occurring in intermediate materials linking each cables, penetration of various impurities, and undermining of cable insulation layers. This paper simulated investigated partial discharge properties of XLPE which is widely used for ultra high voltage cable insulation materials and EPDM which is being used as insulation layer of cable joint materials kit, using Boundary Element Method. The result of computer simulation showed that inner-Void defect caused silicone oil to weaken the E-field effect. and we also found that E-field distribution in EPDM remained relatively lower than that in XLPE.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.239-244
• /
• 2006

As an effective means to convey crushed materials from seabed to onboard ship, air-lift pump provides a reliable mechanism due to its simple configuration and easy-to-operate principle. The present study is focused on fundamental investigation of related performance through analysis program based on the gas-liquid two-phase flow in circular pipes. It is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.198-207
• /
• 1996

It is well known that drag reduction in single phase liquid flow is affected by polymer material, molecular weight, polymer concentration, pipe diameter, and flow velocity. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research of drag reduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity, and turbulent intensity whether polymer is added in the horizontal two phase system or not. Experiment has been conducted in a test section with the inner diameter of 24mm and the length of 1,500mm. The polymer materials used are two kinds of polyacrylamide[PAAM] and co-polymer[A611P]. The polymer concentration was varied with 50, 100 and 200 ppm under the same experimental conditions. Experimental results showed that the drag reduction of co-polymer is higher than that of polyacrylamide. Mean liquid velocities increased as polymer was added, and turbulent intensity decreased inversely near the pipe wall.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.64.1-64.1
• /
• 2011

LCD 디스플레이 등에 사용되는 글래스 패널 위에 bare si die를 직접 실장하는 COG 플립칩 패키지의 경우 Au 범프와 ITO 패드 간의 전기적 접속 및 접합부 신뢰성 확보를 위해 접속소재로서 ACF (anisotropic conductive film)가 사용되고 있다. 그러나 ACF는 고가이고 접속피치 미세화에 따라 브릿지 형상에 의한 쇼트 등의 문제가 발행할 수 있어 NCP (non-conductive paste)의 상용화가 요구되고 있다. 본 연구에서는 NCP를 적용한 COG 패키지에 있어서 온도, 압력 등의 열압착 본딩 조건과 NCP 물성이 Au-ITO 접합부의 전기적 및 기계적 특성에 미치는 영향을 조사하였다. NCP는 에폭시 레진과 경화제, 촉매제를 사용하여 다양하게 포뮬레이션을 하였고 DSC (Differential Scanning Calorimeter), TGA (Thermogravimetric Analysis), DEA (Dielectric Analysis) 등의 열분석장비를 이용하여 NCP의 물성과 경화 거동을 확인하였다. 테스트 베드는 면적 $5.2{\times}7.2\;mm^2$, 두께 650 ${\mu}m$, 접속피치 200 ${\mu}m$의 Au범프가 형성된 플립칩 실리콘 다이와 접속패드가 ITO로 finish된 글래스 기판을 사용하였다. 글래스 기판과 실리콘 칩은 본딩 전 PVA Tepla사의 Microwave 플라즈마 장비로 Ar, $O_2$ 플라즈마 처리를 하였으며, Panasonic FCB-3 플립칩 본더를 사용하여 본딩하였다. 본딩 후 접합면의 보이드를 평가하고 die 전단강도로 접합강도를 측정하였다.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.14-21
• /
• 1999

As an effective means to convey crushed materials from seabed to onboard ship and to raise hazardous or abrasive liquids, air-lift pump provides a reliable mechanism due to its simple configuration and easy-to-operate principle. The present study is focused on investigation of related performance by the analysis program based on the gas-liquid two-phase flow in circular pipes. The program covers pump operating in isothermal and vertical two-phase flow with Newtonian liquids. It is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates. The comparison between riser performance of the conveyed liquid flow rate calculated by the computer program and measured data with large scale air lift pump system constructed in 200 meter depth vertical tank reveals similar distribution.

• Journal of Aquaculture
• /
• v.12 no.4
• /
• pp.323-331
• /
• 1999

Most of channel fish farming in Alabama are still earthen pond style, and filled by rainfall and runoff. The water levels of ponds are maintained with stand-pipe, and the effluent from ponds very little discharged at usual time except ant heavy rains and crop season. Overflow from ponds following rains occurs mostly in winter and early spring when stream flows high. In this study to know how much effluents fish ponds affected to streams which are nearby ponds, a survey carried out on the variation of water quality of seven streams and effluents at heavy rains. Water samples were collected at 14 sites on upstream (did not affected by effluents) and downstream(being affect by effluents), and sampled monthly from August 1997 to August 1998. There were no clear trends of difference in most water quality variables between upstream and downstream of catfish farms during a year. The effluents from ponds after heavy rains were not highly polluted, but sometimes have elevated concentrations of TSS. Nitrogen content of effluents was higher than that of routine streams , but phosphorus was not clear. From this result suggest than the effluents from catfish farm are not having adverse impacts on stream water quality still yet .