• 동력기계공학회지
• /
• 제21권2호
• /
• pp.41-47
• /
• 2017

Boron steel (51B20) was cold forged using by new designed dies to apply for automotive aluminum wheel nut. The formability and mechanical properties of boron steel were compared with carbon steel(S45C) which has been used up to date for the wheel nut material. The formability was investigated on the dies designed with various types of punch nose using by FEM. The metal flow and compressive stress on the dies during cold forging were investigated and compared each other. The forging process with a new designed die showed the improved metal flow with a reduced forging load which resulted in the significant increase of the die life. It was recommended that the carbon steel for automotive wheel nut material could be substituted by the boron steel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.7-12
• /
• 2008

A hot stamping technology of vehicle door impact beam made of thin sheet steel has been developed, with the aim of ensuring occupant safety in a side collision. This technology has been implemented to increase the strength of vehicle body parts and to reduce not only the weight of door impact beam but also the number of work processes. Mechanical tests were performed to obtain material properties of hot-stamped specimen and those were used as input data in stamping and structural simulation for optimal design of door impact beam. Strength of hot-stamped door impact beam increased to the value 102% higher than that of conventional pipe-shaped door impact beam and structural simulation showed that hot-stamped door impact beam achieved 28% weight reduction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.482.2-482.2
• /
• 2014

최근 고효율 실리콘 태양전지 제작을 위해 다양한 연구가 진행되고 있다. 이온주입법을 이용한 PN 접합 형성은 기존의 확산법에 비해 표면과 실리콘 기판 내부에서 도펀트 조절이 용이하다는 장점에 의해 주목 받고 있다. 하지만, 이온주입법으로 도펀트를 주입할 경우, 도펀트와 기판의 충격으로 비정질 상과 결정 결함이 형성된다. 결정 결함은 생성된 전자와 정공의 재결합 준위로 작용하기 때문에 적절한 이온주입 조건과 후 열처리를 통해 높은 특성을 갖는 PN접합층을 형성하여야 한다. 본 실험에서는 보론 도핑된 p형 실리콘 기판에 인을 주입하였다. 인 이온 주입 시 가속전압과 열처리 조건을 달리하여 전기적 특성을 관찰하였으며, 태양전지 에미터층으로의 적용 가능성을 조사해 보았다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 춘계학술발표논문집 (하)
• /
• pp.841-844
• /
• 2001

원자력 발전소의 에너지를 생성하는 원자로의 동특성(Reactor Dynamic Characteristics)은 반응도(Reactivity) 영향인자가 변하여 원자로에 가해지는 외란(disturbances)에 의한 반응도 궤환(feedback)과 부가적으로 변하는 각종 원자로 계통의 설계변수 들에 대한 복잡한 노물리 현상을 통해 결정되며 이러한 현상을 이해하는 것은 원자력 발전소 종사자에게는 무척이나 중요한 일이다. 본 고에서는 가상현실 등 첨단기법을 이용하여 전력연구원에서 개발한 교육지원시스템(VRCATS)의 일환으로 강의실 이론 교육 시에 원격으로 시뮬레이터에 접속하여 각종 반응도 변화를 통한 원자로 노심상태 즉, 노심 내 전체 중성자속분포, 각종 온도 분포를 실시간으로 3 차원으로 보여주며, 시간에 따른 제논, 보론농도 등 반응도 변화 인자 및 총 반응도 변화추이 등을 감시 할 수 있는 컴퓨터 지원 노심설계 및 훈련 시스템(PREMARK) 개발 내용 및 특징을 기술하였다.

• 소성∙가공
• /
• 제20권8호
• /
• pp.540-547
• /
• 2011

Recent years have seen advent of hot stamped parts made from laser-welded blanks of boron steels for structures requiring high crash energy absorption. However, the presence of Al-Si coating interfered with satisfactory mechanical characterizations after laser butt welding. In this study, laser ablation technology was considered in order to facilitate adequate mechanical characterization of the final hot-stamped panels.

• 소성∙가공
• /
• 제20권8호
• /
• pp.568-574
• /
• 2011

The combination of tailor welded blank (TWB) and hot stamping often offers improved crash-worthiness and reduced mass of stamped parts in the automobile body. To investigate the formability of laser TWB and the reliability of weld line, the present study used 22MnB5 boron steel sheet of the same thickness and used the Erichsen cupping test at elevated temperatures. The effects of laser direction, die temperature, weld line positions and forming speed on formability(the limiting dome height) were studied and the results were compared with the formability of the base material.

• 소성∙가공
• /
• 제19권4호
• /
• pp.203-209
• /
• 2010

In the hot press forming process (HPF), a martensitic structure is obtained by controlling the cooling rate when cooling a boron sheet that is heated up to over $900^{\circ}C$. The HPF process has various advantages such as the improvement in formability and material properties and minimal spring back of the deformed materials. The factors related to the cooling rate depend on the heat transfer characteristics between heated materials and dies. Therefore, in this study, the cooling rate is controlled by adjusting the heat transfer coefficient of the material at the pressing process. And, the mechanical properties and microstructure of the deformed material is demonstrated during the HPF process where cold dies are used to form the heated steel plate. This is achieved by varying the major forming conditions that control the cooling rate regarded as the most important process parameter.

• 전기의세계
• /
• 제30권4호
• /
• pp.227-230
• /
• 1981

The variation of sheet resistance and the reduction of masking oxide thickness with the flow rate of nitrogen gas has been measured in Boron predeposition process with Planar Diffusion source, BN-975. At 900.deg. C, the sheet resistance varied as much as 75% when the nitrogen flow rate was changed from 0.4 liters/min to 2.0 liters/min. At 975.deg. C, however, only 12% of sheet resistance variation was observed under the same flow rate change. The reduction of masking oxide thickness at 975.deg. C for a 5 min predeposition was 600 nm when the nitrogen flow rate was 0.4 liters/min. When the flow rate incresased to 1.9 liters/min, however, only 100nm of masking oxide was consumed in a similar predeposition process.

• E2M - 전기 전자와 첨단 소재
• /
• 제5권3호
• /
• pp.320-327
• /
• 1992

Twin-tub CMOS 공정에 의해 제작된 서브마이크로미터 채널길이를 갖는 n채널 및 p채널 MOSFET의 특성을 고찰하였다. n채널 및 p채널 영역에서의 불순물 프로파일과 채널 이온주입 조건에 따른 문턱전압의 의존성 및 퍼텐셜 분포를 SUPREM-II와 MINIMOS 4.0을 사용하여 시뮬레이션하였다. 문턱전압 조정을 위한 counter-doped 보론 이온주입에 의해 p채널 MOSFET는 표면에서 대략 0.15.mu.m의 깊이에서 매몰채널이 형성되었다. 각 소자의 측정 결과, 3.3[V] 구동을 위한 충분한 여유를 갖는 양호한 드레인 포화 특성과 0.2[V]이하의 문턱전압 shift를 갖는 최소화된 짧은 채널 효과, 10[V]이상의 높은 펀치쓰루 전압과 브레이크다운 전압, 낮은 subthreshold 값을 얻었다.

• 한국주조공학회지
• /
• 제9권5호
• /
• pp.389-395
• /
• 1989

The effects of phosphorus and boron additions and isothermal holding time on the residual magnesium and sulfur content, and on the resultant graphite structure of cast irons were investigated. The effective recovery ratio of magnesium showed that adding phosphorus to the melt retarded the fading rate of magnesium but adding boron accelerated it. However, the residual sulfur content was found to be decreased with isothermal holding time at the begining, and then to be increased again with holding time by resulfurization. The Mg-Equivalent for producing compacted vermicular graphite structure was found to be increased with the addition of phosphorus, whereas to be decreased with the addition of boron.