• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.491-499
• /
• 1997

High flexible lightweight composites containing tobermorite as a main mineral is produced using various amorphous silicates, lime, cement and fibers. Here, Mechanical properties of the composites were studied by observing microstructures of hydrates and fibers. Amorphous silicates having better hydraulicity retarded the crystallization of tobermorite due to better formation of C-S-H gel in water bath curing, but, difficult conversion from C-S-H gel to tobermorite in hydrothermal reaction. In the low molar ratio of CaO/SiO2 (0.67), faster crystalization was observed dued to more impurities such as Al2O3 alkali, resulting in improving mechanical properties due to small crystal size and many contact points. It was identified that a lot of calcium silicate hydates formed at surface of pulps increase bonding strength and the crack-resistance of matrix in the composites, but decrease hardness and compressive strength. The choice of amorpous silicates having better hydraulicity, low CaO/SiO2 adding each fibers bellow about 5% in the raw mixs and lower molding pressure should be needed at improve mechanical properties of composites.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.144-149
• /
• 1993

The results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced silica fume.cement composites and light weight fly ash.cement composites are presented in this paper. The CF reinforced silica fume.cement composites using silica fume early strength cement were prepared with Pan-derived or Pitch-derived CF, and Lt. Wt, fly ash.cement composites using fly ash, early strength cement, perlite and a small amount of foaming agent. As the test results show, the flexural strength, toughness and ductility of CF reinforced silica fume .cement composites were remarkably increased by fiber contents. Also, the manufacturing process technology of Lt. Wt. fly ash.cement composites was developed and its optimum mix proportions were proposed. And the compressive and flexural strength of the fly ash.cement composites by hot water cured were improved even more than by moist cured, but are decreased by increasing fly ash replaced ratio for cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.224-228
• /
• 1995

Addition of hooked steel fibers into the cementitious materials enhanced shear resistance and consequently improves structural behavior and shear strength of reinforced hooked steel fibrous concrete beam(RHSFCB) under the shear forces. Experimental observations were made on the main parameters effecting structural behavior of RHSFCB in this study. The volume fractions of fibers, shear span to depth ratios, and spacings of stirrups were taken into account as the main parameters. Some equations reported in the literatures, regarding the predictions of the shear strength of RHSFCB have been evaluated statistically based on the total number of 95 test results on RHSFCB failed in shear on shear-flexural mode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.75-79
• /
• 1995

The results of an experimental study on the manufacture and the mechanical properties of fiber reinforced calcium silicates-cement composites utilizing by products (fly ash or cement sludge) for construction materials are presented in this paper. As the test results show, compressive, tensile, and flexural strength, fracture toughness of fiber reinforced calcium silicates-cement composites were improved by increasing the fly ash and fiber contents, but were decreased by increasing cement sludge contents. Somehat, especially increasing fiber contents the fracture toughness of the composites were remarkably increased. Also, the mechanical properties of the composites reinforcing alkali-resistance GF were higher than those of the composites reinforcing Samoa Pulp.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.57-58
• /
• 2010

In this paper, direct tensile strength, $f_t$, and FR index, $F_i$, were considered, and factor ${\alpha}$ between and $f_t$ and $\sqrt{f'_c}$ was estimated through the results of preceding studies on the material properties of SHCCs in order to propose equation for evaluating shear strength of SHCC walls. Shear strength calculated by the proposed equation predicted shear strength of SHCC walls accurately, showing similar tendencies to experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.69-70
• /
• 2010

This paper presents the flexural capacities of one-way hollow slab with materials. To verify the flexural capacities of this hollow slab, flexural tests were performed on the one-way hollow slabs. The test parameters included two different materials of plastic balls. The material parameters were general plastic and glass fiber plastic.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.233-234
• /
• 2010

Using an expansion admixture can reduce an initial shrinkage crack and improve a prestress. Therefore, this paper presents the results of a study performed to evaluate this deformation and obtain a better understanding of the behavior of SHCC using an expansion admixture. To evaluate a performance of SHCC using an expansion admixture was tested a drying shrinkage, compressive strength, flexural strength, and tensile strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.55-56
• /
• 2010

Infill walls have been investigated experimentally and theoretically by many researchers during last decades. The objective of this research is to evaluate structural strengthening performance of lightly reinforced concrete with reduced the inside cross-section of Strain-hardening cement composites(SHCC) experimentally.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.258-263
• /
• 1999

In this study, the numerical and experimental investigations were conducted to understand ultrasonic wave propagation and to evaluate the degree of fiber waviness in thick composites nondestructively. The path, energy and traveling time of insonified wave were predicted by adopting the ray and plane wave theories. In the analysis, the composites were assumed to have continuous fiber with sinusoidal waviness in a matrix and were modeled as stacks of infinitesimally short length off-axis elements with varying fiber orientation along the length direction. From the experiments on the specially fabricated thick composite specimens with various degrees of uniform fiber waviness, the energy distributions of received wave were obtain for the various positions of transmitter. It was observed that the energy of wave was converged to the adjacent peaks of fiber waviness. The location where maximum energy of wave was detected from the experiments showed good agreement with the location obtained from theoretical predictions. Finally, the test procedure was Proposed to evaluate fiber waviness in thick composites by considering the energy of wave and relative distance between transmitter and receiver.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.95-100
• /
• 1999

A FEA(finite element analysis model) was proposed to study stress and strain distributions in thick composites with fiber waviness and initial curvature under flexural loading. Three types of model with initial curvature were considered in this study: flat, concave and concave models. In the analysis, both material and geometrical nonlinearities were incorporated. Four point flexural tests were conducted on the flat specimens to obtain the flexural behavior of thick composites experimentally. It was concluded that the predictions from the models were in good agreement with the experimental results. It was shown that the stress and strain distributions as well as nonlinear flexural behaviors of thick composites were significantly affected by the fiber waviness and initial curvature.