• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.216-221
• /
• 2006

An investigation of the influence of $WO_3$ and $V_2O_5$ catalysts on the microstructure, phase formation and selective catalytic reduction (SCR) efficiency of the synthesized SCR powders has been carried out. A commercial anatase-$TiO_2$ was used as the catalysts support. For $WO_3(10wt%)/TiO_2$, the W loading to the $TiO_2$ support led to the lower in anatase to rutile transition temperature from $1200^{\circ}C$ of $TiO_2$ support to ${\sim}900^{\circ}C$. The transition temperature was also lowered to below $650^{\circ}C$ in the $V_2O_5$(5 and 10 wt%) added composition. The $WO_3(10wt%)/TiO_2$ SCR powder obtained at $450^{\circ}C$ showed near 100% of $NO_x$ conversion efficiency at $350{\sim}400^{\circ}C$ and for the powder prepared at $650^{\circ}C$ the same efficiency was achieved in wider temperature range $300{\sim}400^{\circ}C$. The highest $NO_x$ conversion efficiency of 100% was obtained in the $V_2O_5(5wt%)/TiO_2$ SCR composition calcined at $650^{\circ}C$ in the relatively wider temperature range $250{\sim}350^{\circ}C$, while the catalytic efficiency considerably decreased for the $V_2O_5(10wt%)/TiO_2$. The lowered conversion efficiency of $NO_x$ observed in the $V_2O_5(10wt%)/TiO_2$ composition calcined at $650^{\circ}C$ was considered to be correlated with the lowered surface area resulting from the increased crystallite growth by highly reactive vanadium loading.

• Korean Security Journal
• /
• no.31
• /
• pp.157-185
• /
• 2012

Today, the emergence of cyberspace and advancement of globalization caused not only the transformation of our productive and conventional life but also the revolutionary transition of use of destructive violence such as crime and warfare. This transition of environmental condition connects various security threats which separatedly existed in individual, local, national, and global levels in the past, and transformed the mechanical sum of all levels of security threats into the organic sum of multi-dimensional security threats. This article proposes that the sum of multi-dimensional security threats is caused by the interconnectivity of various different levels of security threats and the integrated interdisciplinary perspective is essential to properly understand the fundamental existence of today's security problem and the reality of fear that we face today. The holistic security, the concept proposed here, is to suggest the mode of networked response to multi-dimensional security threats. The holistic security is suggested to overcome the conventional divisional approach based on the principle of "division of labor" and bureaucratic principles, which means more concretely that national security and criminal justice are divided and intelligence, military, police, prosecution, fire-fighting, private security, and etc. are strictly separated into its own expertise and turf. Also, this article introduces integrated security approaches tried by international organization and major countries overseas with the respect of the holistic security. The author have spent some substantial experience of participant observation, meetings, seminar, conference, and expert interviews regarding the issues discussed in the article in various countries including the United States, Russia, Austria, Germany, Canada, Mexico, Israel, and Uzbekistan for the last ten years. Intelligence and information on various levels of security threats and security approaches introduced in this paper is obtained from such opportunities.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.255-269
• /
• 2011

The purpose of study has to analyze with non destructive method for researching the tool that could be measured with the status of record written on Hanji speedily. Because the original record should be destructed for analyzing with previous method in the case of the paper record, it was to develop the tool based on non destructive method for overcoming such limit. The study was used with FT NIR (Fourier transform NIR) for analyzing the Hanji for being written and preserved. The FT NIR spectrometer that of NIR spectrometer has the better performance of precision and accuracy than dispersive NIR spectrometer was used. Also the wavelength of FT-NIR was measured with 12,500 to 4,000 $cm^{-1}$, and the integrating sphere as diffuse reflectance type was used for analyzing Hanji. The moisture and acidity (pH) of chemical factors as quality evaluated factor of Hanji was studied for the correlation of NIR spectrum. And then The NIR spectrum was pretreated for showing the coefficients of optimum correlation. MSC and First derivative of Savitzky - Golay was used as pretreated method, and the coefficients of optimum correlation were shown by PLSR(Partial least square regression). And the coefficients of optimum correlation were calculated by PLSR(Partial least square regression). The correlation coefficients of acidity had 0.92 on NIR spectra without pretreatment. Also the SEP of acidity was 0.24. And then The NIR spectra with pretreatment would have more good correlation coefficients ($R^2=0.98$) and more good SEP(=019) on acidity. Therefore the data of correlation coefficients ($R^2$) and SEP with pretreatment was shown to be superior. And NIR spectra data of first derivative had best linearity on the correlation coefficients ($R^2=0.99$) and also SEP(=0.45) was superior. Therefore the correlation coefficients and SEP of first derivative had better than those of NIR spectra of no pretreatment. As such result, it was possible to evaluate the record status of Hanji speedily with integrated sphere and NIR analyzer as non destructive method.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.221-232
• /
• 2021

This study analyzed co-registration results according to the geometric processing level of reference image, which are Level 1R and Level 1G provided from KOMPSAT-3 and KOMPSAT-3A images. We performed co-registration using each Level 1R and Level 1G image as a reference image, and Level 1R image as a sensed image. For constructing the experimental dataset, seven Level 1R and 1G images of KOMPSAT-3 and KOMPSAT-3A acquired from Daejeon, South Korea, were used. To coarsely align the geometric position of the two images, SURF (Speeded-Up Robust Feature) and PC (Phase Correlation) methods were combined and then repeatedly applied to the overlapping region of the images. Then, we extracted tie-points using the SURF method from coarsely aligned images and performed fine co-registration through affine transformation and piecewise Linear transformation, respectively, constructed with the tie-points. As a result of the experiment, when Level 1G image was used as a reference image, a relatively large number of tie-points were extracted than Level 1R image. Also, in the case where the reference image is Level 1G image, the root mean square error of co-registration was 5 pixels less than the case of Level 1R image on average. We have shown from the experimental results that the co-registration performance can be affected by the geometric processing level related to the initial geometric relationship between the two images. Moreover, we confirmed that the better geometric quality of the reference image achieved the more stable co-registration performance.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.27-34
• /
• 2017

The author investigated interventional radiology patient doses in several other countries, assessed accuracy of DAP meters embedded in intervention equipments in domestic country, conducted measurement of patient doses for 13 major interventional procedures with use of Dose Area Product(DAP) meters from 23 hospitals in Korea, and referred to 8,415 cases of domestic data related to interventional procedures by radiation exposure after evaluation the actual effectives of dose reduction variables through phantom test. Finally, dose reference level for major interventional procedures was suggested. In this study, guidelines for patient doses were $237.7Gy{\cdot}cm^2$ in TACE, $17.3Gy{\cdot}cm^2$ in AVF, $114.1Gy{\cdot}cm^2$ in LE PTA & STENT, $188.5Gy{\cdot}cm^2$ in TFCA, $383.5Gy{\cdot}cm^2$ in Aneurysm Coil, $64.6Gy{\cdot}cm^2$ in PTBD, $64.6Gy{\cdot}cm^2$ in Biliary Stent, $22.4Gy{\cdot}cm^2$ in PCN, $4.3Gy{\cdot}cm^2$ in Hickman, $2.8Gy{\cdot}cm^2$ in Chemo-port, $4.4Gy{\cdot}cm^2$ in Perm-Cather, $17.1Gy{\cdot}cm^2$ in PCD, and $357.9Gy{\cdot}cm^2$ in Vis, EMB. Dose referenece level acquired in this study is considered to be able to use as minimal guidelines for reducing patient dose in the interventional radiology procedures. For the changes and advances of materials and development of equipments and procedures in the interventional radiology procedures, further studies and monitorings are needed on dose reference level Korean DAP dose conversion factor for the domestic procedures.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.377-410
• /
• 2009

In the East Asian Confucianism society, Hakmun was aimed to bring human beings and nature into harmony, and to explore a unity between knowledge and conducts. For example, Neo-Confucianism aspired they could explain the human existence and society through a single concept of Iki(理氣, the basic principles and the atmospheric force of nature). In this philosophy, humanics and natural sciences had not been differentiated at all. The East-West cultural interchanges at the beginning of modernity caused a crack in the traditional academic concepts. Through the Hundred Days of Reform(變法自疆運動, a movement of Strenuous Efforts through Reforming the Law), the Western Affairs Movement(洋務運動) in China, Meiji Restoration(明治維新) in Japan, or Innovation Movements(開化運動) and the Patriotic Enlightenment Movement(愛國啓蒙運動) in Korea, the traditional meanings of Hakmun was degraded while it became a target of the criticism of the enlightenment movements. Accordingly, East Asians' perception of Hakmun rapidly began to change. Although there had been the Silhak(實學, practical science) movement in Korea, which tried to differentiate its conceptualization of Hakmun from that of Neo-Confucianism during the 18th and 19th century, the fundamental shift in meaning occurred with the influx of the modern Western culture. This change converted the ultimate objective of Hakmun as well as its methods and substances. The separation of humanics and natural sciences, rise in dignity of the technological sciences, and subdivision of learning into disciplines and their specialization were accelerated during the Korean enlightenment period. The inflow of the modern western science, humanized thought, and empiricism functioned as mediators in these phase and they caused an irreversible crack in the traditional academic thoughts. Confronting the western mode of knowledge, however, the East Asian intellectuals had to explain their new learning by using traditional terms and concepts; modification was unavoidable when they tried to explain the newly imported knowledge and concepts. This presentation focuses on the traditional concepts of 'gyeogchi'(格致, extending knowledge by investigating things) and 'gungni'(窮理, investigation of principles), pervasively used in philosophy, physics and many other fields of study. These concepts will mark the key point with which to trace changes of knowledge and to understand the way how the concept of Hakmun was converted into a modern one.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.19-25
• /
• 2002

Ternary $xSrO-yB_2O_3-0.1Al_2O_3$ and $xSrO-yB_2O_3-0.1SiO_2$ glasses were prepared as a function of R(${\equiv}x/y$). The fraction of four-coordinated brans ($N_4$), symmetric three-coordinated barons ($N_{3S}$), and asymmetric three-coordinated barons ($N_{3A}$) were determined quantitatively to study the structures of these glasses by $^{11}B$ NMR. The values of $Q_{cc}$ and ${\eta}$ for $BO_3$ unit in the glasses were 2.74MHz and 0.22, those for $BO_3{^-}$ unit were 2.54MHz and 0.55, and those for $BO_4$ unit 0.60~0.75MHz and 0.00, respectively. The structure of SrBAl glass at $R_{1st}$ consisted of tetraborate ($[B_8O_{13}]^{-2}$) units and 1st-modified diborate ($[B_2Al_2O_7]^{-2}$) units, and those for the glass at $R_{max}$consisted of diborate ($[B_4O_7]^{-2}$) units, metaborate ($[BO_2^{-1}]$), 1st-modified diborate units, and 2nd-modified diborate ($[B_2Al_2O_8]^{-4}$) units. Due to the oxygens introduced from the strontium oxide. $AlO_4$ units were preferably formed rather than $BO_4$ units. And, the structure of SrBSi glasses in the region $R{\leq}0.5$ could be viewed as binary $SrO-B_2O_3$ glasses structure diluted by silicate oxide: therefore, the Si atoms of the glasses did not contributed to the change the configuration around the boron atoms. The silicate oxide was formed the $SiO_4{^-}$ units rather than the $BO_3{^-}$ units by the oxygens introduced from the storntium oxide in the region of $R{\geq}R_{max}$, and structure of those glass at $R_{max}$ consisted of diborate units, metaborate units loose $BO_4([BO_2]^{-1})$, and $SiO_4{^-}([SiO_{2.5}]^{-1})$ units.

• Research in Community and Public Health Nursing
• /
• v.11 no.1
• /
• pp.289-316
• /
• 2000

우리나라의 경우 지역사회 재난 관리계획과 훈련이 보건의료적 모형이라기 보다는 민방위 모형에 입각하기 때문에 사고 현장에서의 환자 중증도 분류, 합리적 환자배분 및 이송, 병원 응급실에서의 대처 등이 체계적으로 이루어지지 못하고 있으며, 지역사회가 이에 즉각적으로 반응할 수 없다. 본 연구는 삼풍 붕괴사고 시에 대응방식과 그 후의 우리나라 응급의료 체계를 분석함으로써 대형사고 예방과 재난관리를 위한 우리나라 응급의료체계의 개선방안과 간호교육에서의 준비부분을 제시하고자 한다. 1 삼풍 사고 발생시에는 이를 관장할 만한 법적 근거인 인위적 재해에 관한 재난관리법이 없었다. 따라서 현장에서는 의학적 명령체계를 확보하지 못했기 때문에 현장에서의 응급 처치는 전혀 이루어지지 못하였다. 현장에서의 중증도 분류. 응급조치와 의뢰, 병원과 현장본부 그리고 구급차간의 통신 체계 두절, 환자 운송 중 의료지시를 받을 수 있도록 인력, 장비, 통신 체계가 준비되지 못하였던 점이 주요한 문제였다. 또한 병원 응급실에서는 재난 계획이 없거나 있었더라도 이를 활성화하여 병원의 운영 체계를 변환해가지 못하였다. 2. 삼풍백화점 붕괴사고 한달 후에는 인위적 재해에 대한 재난관리법이 제정되고, 행정부 수준별로 매년 지역요구에 합당한 재난관리 계획을 세우도록 법으로 규정하였다. 재난 관리법에는 보건의료 측면에서의 현장대응, 주민 참여, 응급 의료적 대처, 정보의 배된. 교육/훈련 등이 포함되어 있어야 한다. 그러나 법적 기반이 마련된 이후에도 한국 재난 계획 내에는 응급의료 측면의 대응 영역은 부처간 역할의 명시가 미흡하며, 현장에서의 응급 대응과정을 수행할 수 있는 운영 지침이 없이 명목상 언급으로 그치고 있기 때문에 계획을 활성화시켜 지역사회에서 운영하기는 어렵다. 즉 이 내용 속에는 사고의 확인 /공고, 응급 사고 지령, 요구 평가, 사상자의 중증도 분류와 안정화, 사상자 수집, 현장 처치 생명보존과 내과 외과적 응급처치가 수반된 이송, 사고 후 정신적 스트레스 관리, 사고의 총괄적 평가 부분에 대한 인력간 부처간 역할과 업무가 분명히 제시되어 있지 못하여, 사고 발생시 가장 중요한 연계적 업무 처리나 부문간 협조를 하기 어렵다. 의료 기관과 응급실/중환자실, 시민 안전을 책임지고 있는 기관들과의 상호 협력의 연계는 부족하다. 즉 현재의 재난 대비 계획 속에는 부처별 분명한 업무 분장, 재난 상황에 따른 시나리오적 대비 계획과 이를 훈련할 틀을 확보하고 있지 못하다. 3. 지방 정부 수준의 재난 계획서에는 재난 발생시 보건의료에 관한 사항 전반을 공공 보건소가 핵심적 역할을 하며 재난 관리에 대처해야 된다고 규정하고 있다. 그러므로 보건소는 지역사회 중심의 재난 관리 계획을 구성하고 이를 운영하며, 재난 현장에서의 응급 치료 대응 과정은 구조/ 구명을 책임지고 있는 공공기관인 소방서와 지역의 응급의료병원에게 위임한다. 즉 지역사회 재난 관리 계획이 보건소 주도하에 관내 병원과 관련기관(소방서. 경찰서)이 협동하여 만들고 업무를 명확히 분담하여 연계방안을 만든다. 이는 재난관리 대처에 성공여부를 결정하는 주요 요인이다. 4 대한 적십자사의 지역사회 주민에 대한 교육 프로그램은 연중 열리고 있다. 그러나 대부분의 교육주제는 건강증진 영역이며. 응급의료 관리는 전체 교육시간의 8%를 차지하며 이중 재난 준비를 위한 주민 교육 프로그램은 없다. 또한 특정 연령층이 모여있는 학교의 경우도 정규 보건교육 시간이 없기 때문에 생명구조나 응급처치를 체계적으로 배우고 연습할 기회가 없으면서 국민의 재난 준비의 기반확대가 되고 있지 못하다. 5. 병원은 재난 관리 위원회를 군성하여 병원의 진료권역 내에 있는 여러 자원을 감안한 포괄적인 재난관리계획을 세우고, 지역사회를 포함한 훈련을 해야 한다. 그러나 현재 병원은 명목상의 재난 관리 계획을 갖고 있을 뿐이다. 6. 재난관리 준비도를 평가할 때 병원응급실 치료 팀의 인력과 장비 등은 비교적 기준을 충족시키고 있었으나 병원의 재난 관리 계획은 전혀 훈련되고 있지 못하였다 그러므로 우리나라 재난 관리의 준비를 위해서는 현장의 응급의료체계, 재난 대응 계획, 이의 훈련을 통한 주민교육이 선행되어야만 개선될 수 있다. 즉 민방위 훈련 모델이 아닌 응급의료 서비스 모델에 입각한 장기적 노력과 재원의 투입이 필요하며, 지역사회를 중심으로 대응 준비와 이의 활성화 전략 개발, 훈련과 연습. 교육에 노력을 부여해야 한다. 7. 현장의 1차 응급처치자에 대해서는 법적으로 명시하고 있는 역할이 없다. 한국에서는 응급구조사 1급과 2급에 대한 교육과 규정을 1995년 이후 응급의료에 관한 법률에서 정하고 있다. 이 교육과정은 미국이 정하고 있는 응급구조사 과정 기준과 유사하지만 실습실이나 현장에서의 실습시간이 절대적으로 부족하다. 덧붙여 승인된 응급구조사 교육 기관의 강사는 강사로서의 자격기준을 충족할 뿐 아니라 실습강사는 대체적으로 1주일의 1/2은 응급 구조차를 탑승하여 현장 활동을 끊임없이 하고 있으며, 실습은 시나리오 유형으로 진행된다. 그러므로 우리나라의 경우 응급 구조사가 현장 기술 인력으로 역할 할 수 있도록 교과과정 내에서 실습을 강화 시켜야하며, 졸업생은 인턴쉽을 통한 현장 능력을 배양시키는 것이 필요하다. 8. 간호사의 경우 응급전문간호사의 자격을 부여받게 됨에 따라, 이를 위한 표준 교육 지침을 개발함으로써 병원 전 처치와 재난시 대응할 수 있는 역량을 보완해야 한다. 또한 현 자격 부여 프로그램 내용을 고려하여 정규자격 간호사가 현장 1차 치료자(first responder)로 역할 할 수 있도록 간호학 교과과정을 부분 보완해야한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.