• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.170-178
• /
• 2020

Cymbal transducers are often used as an array rather than single because they have a high quality factor and low energy conversion efficiency. When used as an array, there occurs a big change in the frequency characteristics of the array due to the interaction between constituent transducers. In this study, we designed the structure of a cymbal transducer array to have ultra-wideband characteristics using this property. First, cymbal transducers with specific center frequencies were designed. Then, a 2×2 planar array was constructed with the designed transducers, where the cymbal transducers were arranged to have same or opposite polarization directions. For this structure, we analyzed the effect of the difference in the center frequency of and the spacing between the constituent transducers on the acoustical characteristics of the array. Based on the analysis, we designed the structure of the cymbal transducer array to have the widest possible bandwidth.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.81-84
• /
• 2008

최근 센서네트워크와 같은 에너지 제한 환경을 위한 경량화 부호화 기술의 필요성이 대두됨에 따라 분산 소스 부호화 기술(Distributed Source Coding)의 응용기술로 비디오 부호화 복잡도의 대부분을 차지하는 움직임 예측/보상과정을 부호화기가 아닌 복호화기에서 수행하는 분산 비디오 부호화 기술(Distributed Video Coding)에 대한 연구가 활발히 이루어져 왔다. 이에 가장 대표적인 기술인 Wyner-Ziv 코딩 기술은 채널 코드를 이용하여 원본 프레임과 이에 대한 복호화기의 예측영상인 보조정보 사이의 잡음을 제거하여 영상을 복원한다. 일반적으로 보조정보는 원본영상에 유사한 키 프레임간의 프레임 보간을 통하여 생성되며 채널 코드는 Shannon limit에 근접한 성능을 보이는 Turbo 코드나 LDPC 코드가 사용된다. 이와 같은 채널 코드의 복호화는 채널 잡음 모델에 기반하여 수행되어지며 Wyner-Ziv 코딩 기술에서는 이 채널 잡음 모델을 '상관 잡음 모델' (Correlation Noise Modeling)이라 하고 일반적으로 Laplacian이나 Gaussian으로 모델화 한다. 하지만 복호화기에는 원본 영상에 대한 정보가 없기 때문에 정확한 상관 잡음 모델을 알 수 없으며 잡음 모델에 대한 예측의 부정확성은 잡음 제거를 위한 패리티 비트의 증가를 야기해 부호화 기술의 압축 성능 저하를 가져온다. 이에 본 논문은 원본 프레임과 보조정보 사이의 잡음을 정확하게 예측하여 잡음을 정정할 수 있는 향상된 상관 잡음 모델을 제안한다. 제안 방법은 잘못된 잡음 예측에 의해 Laplacian 계수가 너무 커지는 것을 방지하면서 영상내의 잡음의 유무에 별다른 영향을 받지 않는 새로운 문턱값을 사용한다. 다양한 영상에 대한 제안 방법의 실험 결과는 평균적으로 약 0.35dB에 해당하는 율-왜곡 성능 향상을 보여주었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.602-611
• /
• 2002

Recent advances in technology have resulted in rapid growth in mobile communication. With this explosive growth, reliable transmission and error resilient technique become increasingly necessary to offer high quality multimedia service. The success of error resilient techniques at decoder sensitively depends on error detection performance. Therefore, this paper proposes a computationally very simple and efficient error detection technique using fragile watermark for real-time video communication. To balance between image quality degradation and error detection efficiency, fragile watermark is embedded only in least significant bits of selected transform coefficients. The proposed method is workable without additional bit in video bitstream and can be implemented very efficiently. This method will be useful in video communication in error prone environment such as wireless channel.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.6
• /
• pp.575-584
• /
• 2002

This paper presents a novel DCT-based embedded zero-tree coding and optimal bit allocation algorithm for image sequence coding. In order to fully utilize the structure of the conventional standard coding algorithm and improve the coding efficiency, motion estimation and compensation(ME/MC)-DCT hybrid coding structure and a modified zero-tree coding algorithm are applied. After the rearrangement DCT coefficients into pyramidal structure according to their significance on the decoded image quality, the modified embedded zero-tree coding is performed on layered coefficients. Moreover, for a given overall bit rates, a new optimal bit control scheme is proposed to achieve the best decoded image quality in the consecutive frames. The rate control scheme can also provide the equal quality of decoded image with the control of bit rate and distortion for each frame. The various simulation results are provided to evaluate the coding performance of the proposed scheme.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.11-20
• /
• 2000

The flow characteristics around the stern region of two VLCCs with the same forebody and slightly different afterbody are investigated along with propulsive performance of the ship. The local mean flow measurements and the resistance and self-propulsion tests are carried out in the towing tank for the two VLCC hull forms. The measured results clearly show the formation of bilge vortices and their effect on propulsive efficiency. The comparisons are made for the two VLCC hull forms and the relation between stern framelines and bilge vortex strength is explored. Experimental data can provide a good test case to validate the accuracy of numerical methods and turbulence model of CFD codes for ship flow calculation.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.608-612
• /
• 2005

Fourier transform-near infrared (FT-NIR) spectroscopy is a simple, rapid, non-destructive technique which can be used to make quantitative analysis of chemical composition in grain. An interest in total dietary fiber (TDF) of grain such as rice has been increased due to its beneficial effects for health. Since measuring methods for TDF content were highly depending on experimental technique and time consumptions, the application of FT-NIR spectroscopy to determine TDF content in milled rice. Results of enzymatic-gravimetric method were $1.17-1.92\%$ Partial least square (PLS) regression on raw NIR spectra to predict TDF content was developed Accuracy of prediction model for TDF content was certified for regression coefficient (r), standard error of estimation (SEE) and standard error of prediction (SEP). The r, SEE and SEP were 0.9705, 0.0464, and 0.0604, respectively. The results indicated that FT-NIR techniques could be very useful in the food industry and rice processing complex for determination of TDF in milled rice on real time analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.718-723
• /
• 2008

Bearing is one of the important mechanical elements used in various industrial equipments. Most of failures occurred during the equipment operation result from bearing defects and breakages. Therefore, monitoring of bearings is essential in preventing equipment breakdowns and reducing unexpected loss. The purpose of this paper is to present an online monitoring method to predict bearing states using vibration signals. Bearing vibrations, which are collected as a form of profile signal, are first analyzed by a discrete wavelet transform. Next, some statistical features are obtained from the resultant wavelet coefficients. In order to select significant ones among them, analysis of variance (ANOVA) is employed in this paper. Statistical features screened in this way are used as input variables to support vector machine (SVM). An hierarchical SVM tree is proposed for dealing with multi-class problems. The result of numerical experiments shows that the proposed SVM tree has a competent performance for classifying bearing fault states.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.308-320
• /
• 2006

An analytic solution to the mild-slope equation is derived for waves propagating over an axi-symmetric pit. The water depth inside the pit varies in proportion to a power of radial distance from the pit center. The governing equation is transformed into ordinary differential equations by using separation of variables, and the coefficients of the equations are transformed into explicit forms by using Hunt's (1979) approximate solution. Finally, by using the Frobenius series, the analytic solution is derived. Due to the feature of Hunt's equation, the present analytic solution is accurate in shallow and deep waters, while it is less accurate in intermediate depth water. The validity of the analytic solution is demonstrated by comparison with numerical solutions. The analytic solution is also used to examine the effects of pit geometry and relative depth on wave transformation.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.127-133
• /
• 2009

In this study, dimensionless-cumulative rainfall curves were generated by multivariate Monte Carlo method. For generation of rainfall curve rainfall storms were divided and made into dimensionless type since it was required to remove the spatial and temporal variances as well as differences in rainfall data. The dimensionless rainfall curves were divided into 4 types, and log-ratio method was introduced to overcome the limitations that elements of dimensionless-cumulative rainfall curve should always be more than zero and the sum total should be one. Orthogonal transformation by Johnson system and the constrained non-normal multivariate Monte Carlo simulation were introduced to analyse the rainfall characteristics. The generative technique in stochastic rainfall variation using multivariate Monte Carlo method will contribute to the design and evaluation of hydrosystems and can use the establishment of the flood disaster prevention system.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.581-588
• /
• 2013

We developed the three channel lidar system to measure stratospheric aerosols at the Gwangju Institute for Science and Technology (GIST), a suburban site in Republic of Korea. The system provides backscatter coefficient (${\beta}$) at 532 and 1064 nm as well as depolarization ratios (${\delta}$) at 532 nm ($2{\beta}+1{\delta}$) using the doubled Nd:YAG laser wavelength at 532 and 1064 nm. The lidar system is optimized to measure stratospheric aerosols such as volcanic ashes. This paper describes the details of the optical setup, data acquisition system, and analysis method. This study shows an example of measuring stratospheric aerosols emitted by the volcanic eruption which occurred in Mt. Nabro ($13.37^{\circ}$ N, $41.70^{\circ}$ E).