• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.323-331
• /
• 1995

This study was undertaken to investigate the changes of tooth contacts following orthodontic treatment , using T-Scan system. Occlusal contacts in maximum intercuspation were examined in 26 patients at the end of the active phase of orthodontic treatment and again 3 months into the retention phase to abbess the initial posttreatment occlusal changes. The obtained results of this study were as follows : 1. The mean total number of contacts increased from 11.27 at the end of orthodontic treatment to 13.15 at the fellow up visit, which was found to be statistically significant (P<0.05). 2. The change of number of contacts on anterior teeth was unchanged. 3. The change of number of contacts on posterior teeth was found to be statistically significnat (P<0.01). 4. The change of fetal number of teeth in contact was significant (P<0.05). 5. The number of ant. teeth in contact was slightly increased. but Which was not found to be statistically significant (P>0.05). 6. The number of post. teeth in contact significantly increased, which was statistically significant (P<0.05). 7. A statistically significant relationship was found between the total number of contacts at the end of treatment and the change in the contacts over time. The fewer the number of tooth contact was at the end of orthodontic treatment, the greater number of tooth contact increased over time(r=-0.38, P<0.05).

• Environmental and Resource Economics Review
• /
• v.15 no.1
• /
• pp.27-50
• /
• 2006

We estimate $CO_2$ emissions in Korea industry, 1990 and 2000 using a commodity- by-industry IO model ($CO_2$ hybrid IO mode]). Estimated $CO_2$ emissions in industries include both $CO_2$ emissions from direct and indirect consumption. The results show that total $CO_2$ emissions has increased by 51.6 million TC (Tonne of Carbon) from 64.4 million TC in 1990 to 115.5 million TC in 2000. By applying the structural decomposition analysis technique, we decompose change of $CO_2$ emissions in Korea industry between the period 1990~2000. In the decomposition, we figure out two contributing factors, changes in $CO_2$ coefficient and changes in final demand. The latter is further decomposed as growth effects and structural effects. We also estimated each factor's contribution to the changes in $CO_2$ emissions in industries between 1990~2000. The analysis can be used as a useful resource for policy makers in improving the effectiveness of $CO_2$ emissions mitigation policy.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.194.1-194
• /
• 2003

본 연구는 수출방법의 개선과 절임 가공식품의 개발하고 일본 수출용으로 재배하고 있는 가지 품종의 최적 염절임 방법과 더불어 절임가지의 저장중에 물성 및 일반성분의 변화를 조사하였다. 절임가지의 명도와 황색도는 저장기간이 길어질수록 모든 조건에서 증가하지만, 진공포장한 절임가지의 명도와 황색도는 침지 저장한 것에 비해 변화 정도가 작았다. 절임가지의 염도는 절임 초기에는 축양 품종과 시키부 품종에서 각각 24.67, 20.27% 이었으며, 진공포장한 것은 저장 5일 이후에는 변화가 없었으나 침지 저장한 것에는 저장 중에 계속 감소하였다. pH의 변화는 품종과 저장방법에 관계없이 저장중에 감소하였으며, 수분함량은 절임중에 급격하게 감소하여 축양 품종과 시키부 품종에서 각각 79.93, 82.56% 이었으며, 진공 포장하여 저장한 절임가지에서는 5일째에 증가하였고 이후에는 변화가 없었으나, 침지 저장 방법에서는 두 품종 모두 15일까지 증가하였다. 또한 수용성 단백질 함량의 변화도 수분함량의 변화와 비슷하였다. 비타민 C의 함량은 생가지 보다 두 품종 모두 최적조건으로 염절 임 한 가지에서 높아 축양 품종과 시키부 품종에서 각각 21.41, 24.53mg/100g 이었으며, 저장기간 동안 그 함량이 감소하였고, 진공포장 저장한 방법이 침지 저장한 방법에 비해 감소하는 경향이 적었다. 저장기간에 길어질수록 나트륨과 마그네슘의 함량은 감소하였으나 반대로 칼륨의 함량은 증가하였고 특히 침지 저장한 방법에서 이와 같은 변화가 두드러졌다. 두 품종의 절임가지의 저장방법과 저장기간에 따른 물성 및 성분의 변화를 조사한 결과, 진공포장하는 것이 절임가지의 품질 유지할 수 있는 것으로 생각된다.부로 유출되어 균체의 생육이 억제되며 성장을 저해 또는 사멸시키는 것으로 나타났다. 대장균수는 우유, 달걀 및 콩나물의 모든 처리구에서 BAAG의 첨가에 의해 성장이 억제되었으며 농도가 증가시킬수록 균증식 억제 효과가 뚜렷하였으며, 총균수도 압도적으로 낮은 간을 보여주었다. 달걀의 조단백함량의 변화는 BAAG를 처리하지 않은 무처리 대조구에 비하여 침지 처리한 경우가 조단백 변화가 크지 않았다. 즉, BAAG의 침지 처리한 경우, 저장기간 14일이 경과 한 후에 10%정도의 수준으로 감소한데 반하여, 무처리구인 대조구의 경우, 23%수준으로 감소 증도가 증가하였다. 외관상의 변화와 상품 가치를 측정한 결과는 달걀의 경우, 14일이 경과후에는 무처리 대조구에서 흰자위의 감소와 노른자위와의 경계가 뚜렷하지 못하여 상품으로서의 가치가 크게 떨어진 상태였다. 우유의 경우에는 4$^{\circ}C$와 2$0^{\circ}C$에 저장된 대조구에서는 각각 3일과 12일경과 후 강한 부패취와 아울러, 표피의 갈변정도가 심하되어 관능적으로 부패상태를 인지할 수 있었다. 콩나물의 경우도 저장3일 경과 후에 부패취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의

• Korean Journal of Environment and Ecology
• /
• v.32 no.1
• /
• pp.97-104
• /
• 2018

This study investigated the effect of forest type changes in Daegu, the hottest city in Korea, on the land surface temperature (LST). The LST change by forest type was analyzed by 2scene of Landsat TM image from 1990 to 2007. The land cover types were classified into 4 types; forest areas, urban areas, cultivated areas and other areas, and water areas. The forest areas were further classified into the coniferous tree areas and the broadleaf tree areas. The result of the statistical analysis of the LST change according to the forest type showed that the LST increased when the forest was changed to the urban area. The LST increased by about $0.6^{\circ}C$ when a broadleaf tree area was changed to an urban area and about $0.2^{\circ}C$ when a coniferous tree area was changed to an urban area. This was the temperature change as the result of the simple type change for 17 years. The temperature change was larger when considering both cases of the forest type being retained and changed. The LST increased by $2.3^{\circ}C$ more when the broadleaf tree areas were changed to the urban areas than when broadleaf trees were maintained. The LST increased by $1.9^{\circ}C$ more when the coniferous tree areas were changed to the urban areas than when the coniferous tree areas were maintained. The LST increased by $0.4^{\circ}C$ more when the broadleaf tree areas were destroyed than when the coniferous tree areas were destroyed. The results confirmed that the protection of broadleaf trees in urban forests was more effective for mitigating climate change.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.521-539
• /
• 2009

This study investigates the time-space characteristics of the road traffic flows in Seoul and the relationship with land use patterns. For the purpose, we analyze the road traffic data collected at 118 observation sites over Seoul City area since 1993. We examine the time-trend of the annual average traffic flows per day during the last fourteen years. Three different trends are revealed: rapid increase during the time period between 1993 and 1997, maintenance same level after sharp decrease between year 1997 and 1998, and gradual decrease after sharp decrease between year 2003 and 2004. The spatial distribution patterns of road traffic flows have also been changed significantly during the period. The traffic flows in the urban center have been declined gradually, while the traffic flows in the boundary area and southern CBDs have increased dramatically. In order to examine the relationship with the changes in the land-use patterns and road traffic flows, we analyze the changes in the spatial distribution patterns of population and industries. We developed three multiple linear regression models to test the relationships between the changes in the land-use variables and road traffic flows.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.991-998
• /
• 2008

This study is to determine the effects of PCM concentration on the temperature changes of the air layers of a garment when the environmental temperature changes. The selected PCM was Nonadecane and coated on cotton fabrics with PCM concentrations 10%, 20%, and 30%. The temperature changes of the air layers between fabrics were measured by Human-Clothing-Environment Simulator which measure a dynamic heat transfer. After stabilizing at $34^{\circ}C$ for 1 hour, the multi layered garment system were exposed to $5^{\circ}C$ or $10^{\circ}C$ for 30 minutes and then, exposed to $34^{\circ}C$ for 30minutes. The results like following could be obtained. When the environmental temperature changed high to low, temperature of the air layer increased by heating effect of PCM. In the contrast, when the environmental temperature changed low to high, the temperature increase of the air layer was delayed because of cooling effect by PCM. Also, the more concentration of PCM, the bigger the heating effect. Cooling effect showed more clearly at PCM concentration 20%. The temperature differences of the air layers between with PCM fabrics and with non-PCM fabrics were bigger at $10^{\circ}C$ than at $5^{\circ}C$. Consequently, though PCM has influenced on the temperature of the air layer by heating and cooling effect, those effects haven't shown in all layers equally. It was shown that the effect of PCM varied according to the layer in the case of multi layered garment system and heat gain as well as heat loss in the outermost layer had to be taken into account.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.176-176
• /
• 2017

배수시설 내 맨홀에서의 과부하 흐름은 관거시설의 배수 능력을 저하시켜 우수의 역류로 인한 도시 침수피해의 가중 요인이 된다. 특히, 도시 유역 중 하류부의 저지대에서 주로 설치되는 합류 맨홀은 저지대 침수에 많은 영향을 미치므로 합류맨홀에서의 흐름특성 분석 및 유입유량 변화에 따른 손실계수의 변화에 관한 연구가 필요한 실정이다. 현재까지 중간맨홀, $90^{\circ}$ 접합맨홀 및 3방향(T형) 합류맨홀 등에 관한 연구는 지속적으로 수행되고 있으나 4방향 합류맨홀에 관한 연구는 기초적인 연구만 수행되고 있다. 4방향 합류맨홀은 세 개의 유입관과 한 개의 유출관으로 구성되어 있으므로 각 유입관의 유입유량 변화에 따라서 맨홀에서의 손실계수가 다양하게 변화된다. 이와 같은 유입유량 변화에 따른 맨홀 내 흐름특성 분석 및 손실계수 산정에 관한 연구는 국내에서는 전무한 실정이다. 그러므로 유입유량 변화에 따른 4방향 합류맨홀에서의 손실계수 변화특성의 분석이 필요하다. 본 연구에서는 4방향 사각형 합류맨홀에서 세방향에서 유입되는 각 유입유량의 유입비($Q_{in}/Q_{out}$)가 0.0~1.0으로 변화하는 조건에서 평균 손실계수를 산정하기 위하여 하수도시설기준(환경부, 2011)의 표준 1호 맨홀 및 연결관경을 1/5로 축소하여 수리실험 장치를 제작하였다. 유출유량은 $3{\ell}/sec$이고 각 유입관(주유입관 및 좌 우측면유입관)의 유입유량을 $0{\sim}3{\ell}/sec$까지 유입유량의 비율을 각각 10%씩 변화시키면서 수리실험을 실시하였다. 실험결과 주관거의 유입유량이 줄어들고 측면관거의 유입유량이 늘어나면서 손실계수가 상승하는 것으로 나타났으며, 한쪽 측면 관거에서만 유입유량이 들어오는 $90^{\circ}$ 접합맨홀의 형태에서 손실계수가 가장 크게 나타났으며, 유입유량 변화에 따른 4방향 합류맨홀에서의 손실계수의 범위는 0.5~1.7으로 산정되었다. 이는 과부하 4방향 사각형 합류맨홀에서는 측면 유입관에서의 유입유량의 증가에 따라 평균 손실계수 값이 크게 증가되는 것으로 판단된다. 이는 김정수(2010) 등이 산정한 $90^{\circ}$ 접합맨홀의 손실계수 및 중간맨홀의 손실계수와 유사하게 나타났으므로 전체적인 손실계수의 범위는 타당하다고 판단된다. 또한, Wang(1988) 등의 유사연구와의 유입유량 변화에 따른 손실계수의 변화 경향도 유사하였다. 따라서 본 연구에서 산정된 유입유량 변화 조건이 고려된 4방향 합류맨홀에서의 손실계수는 XP-SWMM 등의 부정류 흐름이 고려된 도시지역의 침수해석이나 관거 배수능력 평가에 활용이 가능할 것으로 판단된다.

• Journal of Climate Change Research
• /
• v.3 no.1
• /
• pp.13-24
• /
• 2012

CCGIS (Climate Change Adaptation Toolkit based on GIS) was developed to use as a tool for the climate change assessment and any relevant tasks involving climate change adaptation policy over Korean peninsula. The main objective of CCGIS is to facilitate an efficient and relevant information for the estimation of climate change vulnerability index by providing key information in the climate change adaptation process. In particular, the atmospheric modeling system implemented in CCGIS, which is composed of climate and meteorological numerical model and the atmospheric environmental models, were used as a tool to generate the climate and environmental IPCC SRES (A2, B1, A1B, A1T, A1FI, and A1 scenarios) climate data for the year of 2000, 2020, 2050, and 2100. This article introduces the components of CCGIS and describes its application to the Korean peninsula. Some examples of the CCGIS and its use for both climate change adaptation and estimation of vulnerability index applied to Korean provinces are presented and discussed here.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1711-1717
• /
• 2020

X-ray of up to 9MeV are used for container inspection. X-ray intensity must be maintained stably regardless of changes in time. If dose is not constant, it may affect the image quality, and as a result, may affect the inspection of abnormal cargo. Therefore, to acquire high-quality images, continuous dose monitoring is required. In this study, the ion-chamber based device was developed for monitoring the dose change in high-energy x-ray. And to estimate the performance of signal-processing device change according to the environmental change, the output changing due to the change of temperature and humidity was observed. In addition, verification of the device was performed by measuring the output change. As a result of the measurement, there was no significant difference in performance due to changes in temperature and humidity, and the change in output according to the change in exposure was linear. Therefore, it was found that the developed device is suitable for the dose monitoring of high-energy x-ray.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1579-1590
• /
• 2020

In this paper, spatially-adaptive denormalization (SPADE) based U-Net is proposed to detect changes by using high-resolution satellite images. The proposed network is to preserve spatial information using SPADE. Change detection methods using high-resolution satellite images can be used to resolve various urban problems such as city planning and forecasting. For using pixel-based change detection, which is a conventional method such as Iteratively Reweighted-Multivariate Alteration Detection (IR-MAD), unchanged areas will be detected as changing areas because changes in pixels are sensitive to the state of the environment such as seasonal changes between images. Therefore, in this paper, to precisely detect the changes of the objects that consist of the city in time-series satellite images, the semantic spatial objects that consist of the city are defined, extracted through deep learning based image segmentation, and then analyzed the changes between areas to carry out change detection. The semantic objects for analyzing changes were defined as six classes: building, road, farmland, vinyl house, forest area, and waterside area. Each network model learned with KOMPSAT-3A satellite images performs a change detection for the time-series KOMPSAT-3 satellite images. For objective assessments for change detection, we use F1-score, kappa. We found that the proposed method gives a better performance compared to U-Net and UNet++ by achieving an average F1-score of 0.77, kappa of 77.29.