• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.614-616
• /
• 2011

본 연구에서는 유한요소법과 변형률 의존성 연성파괴이론을 이용하여 드로잉 공정에서의 AZ31 마그네슘 합금 판재의 파단 발생을 예측 하였다. 다양한 온도에서의 사각컵 드로잉 실험을 수행하여, 각 온도조건에서의 파단깊이를 측정하였으며, 고온 인장시험을 통해 연성파괴상수를 온도 및 변형률 속도에 의존적인 값으로 표현하고, 실험과 동일하게 모사된 유한요소해석을 수행하였다. 해석결과 얻어진 각 요소의 온도 및 변형률 속도에 따른 연성파괴상수를 이용하여 파단발생을 예측하였으며, 실험결과와 검증하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.53-60
• /
• 2008

In recent years, finite strain consolidation theories including a mechanical nonlinearity and a reasonable coordinate system have been proposed and used in educations and practical consolidation problems. However, despite their reasonable ability to predict the consolidation behavior, their failure in the field can be attributed to the complexity of estimating and selecting proper parameters for simulating the consolidation phenomenon. In this study, therefore, the application of a piecewise-linear method was proposed to solve such problems including the assumption of the uniqueness in compressibility. Especially, the concept of reference curve was introduced to define the effect of strain rate dependency of clay. The applicability of the methodology is verified by several tests. It was found that the proposed method is applicable in restrictive ranges of study carried out in the laboratory. Finally it is expected that the verification in field consolidation problem has to be carried out through future study.

• Explosives and Blasting
• /
• v.39 no.1
• /
• pp.10-21
• /
• 2021

Brittle materials such as rocks and concretes exhibit large strain-rate dependency under dynamic loading conditions. This means that the mechanical properties of such materials can significantly be varied according to load velocity. Thus, the strain-rate dependency is recognized as one of the most important considerations in solving problems of blast engineering or rock dynamics. Unfortunately, however, studies for characterizing the dynamic properties of domestic rocks and other brittle materials are still insufficient in the country. In this study, dynamic tensile tests were conducted using the Hopkinson pressure bar apparatus to characterize the dynamic properties of Geochang granite and high-strength concrete specimens. The dynamic Brazilian disc test, which is suggested by ISRM, and the spalling method were applied. In general, the latter is believed to have some advantages in experiments under high-strain rate deformation. It was found from the tests that there were no significant difference between the dynamic tensile strengths obtained from the two different test methods for the two materials given. However, this was not the expected result before the tests. Actually, authors expected that there be some differences between them. Hence, it is thought that further investigations are needed to clarify this results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.769-777
• /
• 2015

In this study, the rheological models were introduced and developed to reflect rate dependent tensile behaviour of concrete. In general, mechanical properties(e.g. strength, elasticity, and fracture energy) of concrete are increased under high loading rates. The strength of concrete shows high rate dependency among its mechanical properties, and the tensile strength has higher rate dependency than the compressional strength. To simulate the rate dependency of concrete, original spring set of RBSN(Rigid-Body- Spring-Network) model was adjusted with viscous and friction units(e.g. dashpot and Coulomb friction component). Three types of models( 1) visco-elastic, 2) visco-plastic, and 3) visco-elasto- plastic damage models) are considered, and the constitutive relationships for the models are derived. For validation purpose, direct tensile test were simulated, and characteristics of the three different rheological models were compared with experimental stress-strain responses. Simulation result of the developed visco-elasto-plastic damage(VEPD) model demonstrated well describing and fitting with experimental results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.437-445
• /
• 2016

Recently, polyurethane foam has been used in various industry fields to preserve temperature environment of structures, and a wide range of loads from the static to the dynamic are imposed on the material during a life period. The biggest characteristic of polyurethane foam is porosity as being polymeric material, and it is generally known that insulation performance of the material strongly depends on internal void size. In addition, polyurethane foam's mechanical behavior has high dependence on strain rate and temperature as well as being highly non-linear ductile for compression. In the non-linear compressive behavior, volume fraction of voids and elastic modulus decrease as strain increases. Therefore, in this study, temperature-dependent viscoplastic-damage constitutive model was developed to describe the non-linear compressive behavior with the aforementioned features of polyurethane foam.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.77-86
• /
• 1997

The advanced development in many fields of engineering and science has caused much interests and demands for crashworthiness and non-linear dynamic transient analysis of structure response. Crash and impact problems have a dominant characteristic of large deformation with material plasticity for short time scales. The structural material shows strain rate-dependent behaviors in those cases. Conventional rate-independent constitutive equations used in the general purposed finite analysis programs are inadequate for dynamic finite strain problems. In this paper, a rate-dependent constitutive equation for elastic-plastic material is developed. The plastic stretch rate is modeled based on slip model with dislocation velocity and its density so that there is neither yielding condition, nor loading conditions. Non-linear hardening rule is also introduced for finite strain. Material constants of present constitutive equation are determined by experimental data of mild steel, and the constitutive equation is applied to uniaxile tension loading.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.178-188
• /
• 1999

충격하중을 받는 시험편 높이의 1/4 길이의 notch를 가진 3점 굽힘시험편들의 기계적 거동에 관한 컴퓨터 시뮬레이션을 하고 이 시뮬레이션에 대한 실험적 검증도 하여 그 타당성을 입증하였다. 시험편들의 양쪽 가장자리(지지점)에서 작용되어지는 여러 가지의 하중속도에 대한 경우들과 탄소성 von Mises 재질인 모델들을 시뮬레이션에 포함시켰으며 이들에 대한 결과들을 간극 개구 변위, 반력, 크랙선단 개구 변위 및 변형률등이 속도에 의존되는 재질(점소성 재질)에 대한 시뮬레이션 결과와 비교하였다. 또한 여러가지의 동적 하중을 받는 상황하에서의 안정성이 본 연구의 시뮬레이션을 통하여 비교되었으며 그 차이점들이 규명되었다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1145-1150
• /
• 2003

Zr-based bulk metallic glasses have a significant mechanical properties such as high strength and elastic strain limit, and a good processing ability due to the deformation behavior such as superplasticity under supercooled liquid region. Recently, many researches on the determination of optimum working condition in various bulk metallic glasses have been carried out. In this study, the deformation behavior and forming conditions of $Zr_{55}Cu_{30}Al_{10}Ni_{5}$ bulk metallic glass were investigated under three different strain rates and at various temperatures between 627K and 727K. The glass transition temperature, crystallization temperature and supercooled liquid region of $Zr_{55}Cu_{30}Al_{10}Ni_{5}$ bulk metallic glass are 680K, 762K and 82K, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06b
• /
• pp.51-64
• /
• 1999

가스터빈에 사용되는 소재는 여타 금속소재에 비하여 고온 기계적 특성은 우수한 반면 상대적으로 단조성이 떨어지기 때문에, 금속소재의 단조성에 대한 이해와 단조 공정별 장단점을 파악하여 단조공정 설계에 반영하여야 한다. 가스터빈용 Ni합금의 경우 고온기계적 성질은 결정립 크기에 크게 의존한다. 결정립 크기는 기계적 성질에 직접적으로 영향을 미치는데, 동적재결정의 경우 초기 결정립크기, 변형률, 변형속도, 온도 뿐만 아니라 결정립계에 석출된 제2상에 의해서 크게 영향을 받기 때문에 이들 상의 고용온도를 파악하여 단조공정 설계에 반영하여야 한다. 유한요소법으로 변형률과 온도분포를 해석함으로써 단조품 내의 결정립 분포를 효과적으로 예측할 수 있다. 다단계 단조 경우, 최종 단조품의 결정립 크기는 단계별 단조 온도 및 변형률 배분 등에 따라 변하므로 이를 고려하여야 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.383-390
• /
• 2015

This study conducted tensile tests on SA508 Gr.1a low alloy steel and SA312 TP316 stainless steel piping materials under various strain rates at room temperature (RT) and $316^{\circ}C$ to investigate the effects of loading rate on the deformation behavior of nuclear piping materials. At RT, the deformation behavior for both pipe materials showed a typical loading rate dependence, i.e., the strength increased and the ductility decreased as the loading rate increased. At $316^{\circ}C$, however, the strength and elongation of SA508 Gr.1a low alloy steel decreased as the loading rate increased, and its reduction of area non-linearly varied with the loading rate. For SA312 TP316 stainless steel, the strength, elongation, and reduction of area at $316^{\circ}C$ were almost the same regardless of the loading rate. At both temperatures, the strain hardening capacity was nearly independent of the loading rate for SA508 Gr.1a low alloy steel, while it decreased with increasing loading rate for SA312 TP316 stainless steel.