• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.286-295
• /
• 2017

In this study, it is compared various coefficients of subgrade reaction for application of numerical analysis based on measured data by using various theories and empirical formula. The ratio of the maximum and minimum value is 6.80 at the top of wall but it is 1.06 at the maximum displacement point depends on change of calculated coefficient of subgrade reaction. The data of displacement were generally similar considering an increment of a coefficient of subgrade reaction. And the results of comparison of the displacement at the maximum displacement point by numerical analysis and measured data show similar displacement shape.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.317-324
• /
• 2022

In this paper, an analysis method that considers the initial static displacement of structural members using an equivalent single-degree-of-freedom system is presented. Newmark's dynamic analysis algorithm was improved to consider the effect of the initial static displacements of structural members. The effect of the initial static displacement on the maximum response according to the assumed duration of the blast load and natural period of the member was investigated. The effects of positive and negative static displacements on the maximum dynamic responses of structural members subjected to a positively applied blast load were also studied. Modified response charts for the shock-type and pressure-type waves are presented so that static displacements can easily be considered. Using a design example, we demonstrate the significance of the modified response chart that considers the static displacement. Based on the results of this study, the maximum response of a the structural member can be easily obtained whilst considering its initial static displacement. The modified response chart presented in this study can be used for the structural design of plants and military facilities.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.30-30
• /
• 2003

GPS와 VLBI와 같은 우주측지 기술을 이용한 정밀 측위는 수 mn 정밀도의 관측소 좌표결정과 1 mm/year 정도의 고정밀 속도결정에 이용된다. 이를 위해서는 여러 가지 오차 요인들과 다양한 물리적 현상에 대한 모델링이 이루어져야 한다. 그 중의 하나가 해수 하중(ocean loading)에 의한 수직방향의 지각변위이다. 특히 한반도의 서해안은 복잡한 리아스식 해안으로 이루어져 있고, 조수간만의 차이가 크기 때문에 현존하는 모델의 정확도가 떨어진다. KVN(Korean VLBI Network)사업에서 추진하는 3기의 VLBI 중 2기가 서울과 제주도에 설치될 계획이므로, 해수하중에 의한 지각변위에 관한 연구가 선행되어야 한다. 또한 국내 GPS상시관측소의 많은 수가 서해안 지역에 설치되어 있다. 본 연구에서는 서해안 지역의 해수하중에 의한 수직방향의 지각변위를 GPS로 관측하고 이를 서해안 해수조류 모델의 정밀도를 향상시키는데 필요한 기초연구를 수행하였다. 서해안의 4개 GPS 관측소 위치에서의 해수하중에 의한 지각변위를 계산해본 결과 인천 지역에는 3 cm에 육박하는 지각변위가 수직으로 발생함을 알 수 있었다. 같은 크기와 위상의 지각변위 진폭을 GPS로 검출하기 위한 여러 가지 오차 보정과 GIPSY를 이용한 고정밀 키네마틱 GPS 자료처리에 대하여 상세히 소개한다.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.428-434
• /
• 2007

Displacement of tunnel face is important issues for the evaluation of tunnel safety. In this study, conventional convergence and displacement data measured from horizontal inclinometer were analyzed to investigate the trend and characteristics of tunnel deformation during construction. Trend of measured displacement agreed with general understanding of tunnel deformation prior to excavation. It shows that displacement measured from horizontal inclinometer can be used to preestimate the total deformation of tunnel.

• Restorative Dentistry and Endodontics
• /
• v.31 no.1
• /
• pp.50-57
• /
• 2006

The purpose of this study was to investigate influence of each file step of $ProTaper^{(R)}$ system on canal transportation. Twenty simulated canals were prepared with either engine-driven $ProTaper^{(R)}$ or manual $ProTaper^{(R)}$, Group R-resin blocks were instrumented with rotary $ProTaper^{(R)}$ and group M-resin blocks were instrumented with manual $ProTaper^{(R)}$. Pre-operative resin blocks and post-operative resin blocks after each file step preparation were scanned. Original canal image and the image after using each file step were superimposed for calculation of centering ratio The image after using each file step alld image after using previous file step were superimposed for calculation of the amount of deviation. Measurements were taken horizontally at five different levels (1 2, 3, 4 and 5 mm) from the level of apical foramen. In rotary $ProTaper^{(R)}$ instrumentation group, centering ratio and the amount of deviation of each step at all levels were not significantly different (p>0.05). In manual $ProTaper^{(R)}$ instrumentation group, centering ratio and the amount of deviation of each step at all levels except of 1 mm were not significantly different (p>0.05). At the level of 1 mn, F2 file step had significantly large centering ratio and the amount of deviation (p<0.05). Under the condition of this study, F2 file step of manual ProTaper tended to transport the apical part of the canals than that of rotary $ProTaper^{(R)}$.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.63-66
• /
• 2015

3차원 영상을 생성하기 위해 스테레오 매칭을 통해 깊이 정보를 획득한다. 이때 발생하는 경계영역과 텍스처가 부족한 부분의 깊이정보 부정확성 문제를 해결하기 위해 영상 분할 기반 스테레오 매칭 방법을 제안한다. 일반적으로 사용하는 윈도우 기반 스테레오 매칭 결과를 기반으로 분할된 영상 내에서 최적의 변위 값을 재 할당함으로서 깊이정보의 정확성을 향상시킬 수 있다. Mean-shift는 참조 영상에서 화소 간 평균값 차이가 최대가 되는 영역들을 반복적으로 찾는다. 유사한 평균값을 갖는 영역들을 기반으로 영상을 분할하는 것을 Mean-shift를 이용한 영상분할 이라고 한다. 분할된 영상은 각 영역을 대표하는 패치 구조를 가지고 있어 참조 영상에 포함되어있는 잡음에 강인한 특성을 지닌다. 스테레오 매칭을 통해 화소별로 변위 값을 할당해주는 대신, 분할된 영상을 이용하여 각 분할 영역에 동일한 변위 값을 할당한다. 분할된 영상에 동일한 변위 정보를 할당할 경우 객체와 배경의 경계영역에서 잘못된 변위 값이 할당되는 경우가 발생한다. 이러한 경계 영역의 변위정보 부정확성을 보완하기 위해 화소의 기울기 항을 비용 값 계산 과정에 추가하여 단점을 보완한다. 최종 비용 값 계산을 통해 획득한 초기 변위 지도에 중간 값 필터를 적용하여 분류된 영역에 동일한 변위 값을 할당한다. 제안한 방법을 적용하여 경계영역의 정확도가 향상된 최종 변위 지도를 획득한다.

• Journal of radiological science and technology
• /
• v.34 no.2
• /
• pp.91-96
• /
• 2011

The purpose of this study was to analyze the change of morphologic pelvis according to age and gender. Pelvis AP(anterior-posterior) projection were taken from 382 individuals (men: 194, women: 188) at the age of twenty and older. We measured four values of pelvis using CR (computed radiological system) including maximum pelvic breadth (MPB), sacral breadth (SB), transverse diameter of pelvic inlet (TD), and distance between femoral heads (DFH). Average (t-test, ANOVA) and Pearson correlation were calculated for comparison. While there was no significant difference of gender in case of MPB, significant differences were observed in SB (men 97.76 mm, women 102.00 mm), TD (men 138.0 mm, women 149.79 mm), and DFH (men 141.94 mm, women 150.39 mm). The DFH values were negatively correlated with the age (men r=-0.280, women r=-0.207). The morphological changes of pelvis were measured high in the men of 50's and in the women of 60's and 70's. The SB, TD and DFH were greater in the women than in the man. As the ages get higher, the deviation of pelvis were gradually increased, which indicates that the morphological changes of pelvis with respect to the age reflects an aging process.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.44-47
• /
• 2011

본 논문에서는 상사진동에서의 응답을 통해 구성된 모드유연도 행렬에 의해 추정되는 변위/변형을 이용해 전당빌딩의 손상을 정량적으로 평가하는 방법을 제시하였다. 제안된 방법은 전단빌딩의 손살발생 후의 층간변위와 손상발생 전 후의 층간변위 차이인 Damage-induced inter-story deflection(DI-ID)의 관계를 이용해 손상을 정량적으로 평가하는 방법이다. 구조물이 양전단력만을 발생시킴으로써 층간변위를 분명히 파악할 수 있도록 하는 양전단력 탐색하중(Positive Shear Inspection Load)을 통해 DI-ID를 산정한다. 제안된 방법의 검증을 위해 5층의 전단빌딩 축소모형을 대상구조물로 선정했으며, 단일손상과 다중손상의 모사를 위해 1층과 3층의 휨강성을 각각 10% 씩 저감시켰다. Static test와 modal test를 통해 각각의 결과를 비교하는 방법으로 제안된 방법의 성능검증을 수행했으며, 축소모형실험 결과, 두 실험간 평균오차 1% 이내로 정확도를 검증했다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.31-34
• /
• 2010

The rover positioning is performed by estimating the baseline vector components in doubledifference positioning mode. This means that relative displacement due to the tide effects can be neglected when the distance between the reference and rover station is relatively short. However, the tide effects should be carefully modeled and removed as the baseline length gets longer. In this study, the relative displacement over the Korean Peninsula due to tide effects are examined through the numerical analysis. The results show that the tide modeling is required for the precise GPS positioning at cm-level accuracy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.1
• /
• pp.47-59
• /
• 2012

The seismic performance of masonry-infilled frame structures, typical in school buildings, is evaluated through equivalent strut models. A bare frame model, concentric strut models and eccentric strut models with various material characteristics available in the literature are analyzed. Displacements and damage states at the performance points obtained by the capacity spectrum method show great differences among the models. Infill walls act positively in concentric strut models and negatively in eccentric strut models at the performance points for a given seismic demand. In addition, the behavior at the ultimate displacements shows considerably different strengths, inter-story drifts, and numbers and locations of damaged members among various modeling methods and material strengths.