• Title/Summary/Keyword: 변위선도

Search Result 334, Processing Time 0.037 seconds

Active Contour Model for Object Tracking with Large Motion Displacement (큰 움직임 변위의 물체 추적을 위한 활성외곽선 모델)

  • Lee, Joo-Hwi;Oh, Hyung-Gyu;Hong, Helen
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2006.10b
    • /
    • pp.464-469
    • /
    • 2006
  • 본 논문은 연속 영상에서 빠르게 움직이거나 변형이 있는 물체를 추출하기 위한 개선된 활성 외곽선 모델을 제안한다. 제안 방법은 프레임간 물체의 변위를 식별하기 위한 합성 기울기 맵 생성 단계와 큰 변위에도 지역적 최저에 빠지지 않고 견고하게 수렴하기 위한 에너지 비탈면 생성 단계로 이루어진다. 이를 위하여 우선, 두 프레임의 기울기 맵을 합성하고, 불필요한 배경과 잡음을 제거하기 위해 두 프레임의 차를 마스크로 적용하여 합성 기울기 맵을 생성한다. 생성된 합성 기울기 맵에 수학적 형태학 연산의 하나인 닫기 연산을 적용하여 활성 외곽선이 매끄럽게 이동할 수 있는 에너지 비탈면을 만든다. 본 논문에서는 제안방법을 평가하기 위하여 움직임 변위가 큰 연속 영상을 사용하여 기존 활성 외곽선 모델 방법과 비교하여 육안평가, 에너지 최소화 과정 및 수행시간 측면에서 비교분석한다. 본 제안방법은 기존 활성 외곽선 모델 방법보다 큰 움직임 변위와 변형에도 빠르고 정확하게 물체 추적이 가능하다.

  • PDF

Prediction of Ground Condition Changes Ahead of Tunnel Face Using Three-Dimensional Absolute Displacement Analysis (터널 3차원 절대변위 해석기법을 이용한 막장전방지반 예측)

  • Bang, Joon-Ho;Han, Il-Young
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.8 no.2
    • /
    • pp.101-113
    • /
    • 2006
  • Arching effect occurs around the unsupported excavation surface near to tunnel face when a tunnel is excavated in a stable rock mass. If a weak fracture zone exists in front of tunnel face, a displacement occurs between tunnel face and weak fracture zone due to stress concentration. If three-dimensional absolute coordinates (longitudinal, transverse, vertical direction) is measured at tunnel face by geodetic method, the ground change in front of the tunnel face can be predicted by analysing three-dimensional absolute displacement. The purpose of this study is to verify the analysis method of three-dimensional absolute displacement by comparing the trend of displacement ratio at crown and sidewall of tunnel and the influence line/trend line of crown settlement compared with TSP results in the same section.

  • PDF

Influence Lines of a Portal Frame with Joint Translations by Transfer Matrix Method (전달행렬법에 의한 변위를 허용하는 문형라멘의 영향선해석)

  • 남문희;하대환
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.14 no.1
    • /
    • pp.29-34
    • /
    • 2001
  • 구조물설계에 있어서 영향선은 최대반력, 최대전단력, 최대휨모멘트 등을 계산하는데 아주 유용하게 사용된다. 모멘트분배법, 인도행렬법, 전달행렬법, 그리고 Muller-Breslau 원리에 의한 단순보와 연속보의 영향선은 잘 알려져 있고 또 교량공학에서 널리 사용되고 있다. 그러나 변위를 허용하는 특별한 구조물의 영향선을 계산할 경우에는 약간의 어려움이 있다. 이 연구에서는 절점변위를 허용하는 문형라멘의 영향선을 전달행렬법에 의하여 구하고 유한요소법에 의하여 얻은 영향선과 비교하였고 그 결과는 좋은 일치를 보이고 있다.

  • PDF

3D modeling using variable block disparity estimation based on edge information (경계선 정보에 따른 가변 블럭 변위 추정을 사용한 3D modeling)

  • 노윤향;고병철;변혜란;유지상
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2000.11a
    • /
    • pp.205-208
    • /
    • 2000
  • 인간의 좌·우 두 눈에 투영되는 2차원 영상의 양안 시차를 이용하여 물체의 깊이를 인식하는 스테레어 영상이라고 한다. 이러한 2차원 스테레오 영상으로부터 3차원 모델 생성을 위한 깊이 정보를 알기 위해서는 각각의 두 영상에 대응되는 점의 위치를 알 수 있는 변위의 추정이 매우 중요하다. 본 논문에서는 블록 크기에 매우 민감하게 영향 받는 영역기반 방식의 단점을 보완하기 위하여 경계선 정보를 이용한 가변 블록 방식의 변위 추정을 수행한다. 이것은 블록의 크기를 경계선 정보에 따라 가변적으로 정함으로써 정밀한 변위 추성을 할 수 있고 또한 계산량도 많이 줄일 수 있음을 알 수 있다. 이렇게 추정된 변위 정보를 이용하여 특징점에 대한 깊이 정보를 찾아 3차원 모델을 생성한다.

  • PDF

CORRECTION OF DENTAL MIDLINE DEVIATION BY MEANS OF SPACE SUPERVISION (Space supervision을 이용한 치성 정중선 변위의 교정)

  • Kim, Su-Youn;Choi, Young-Chul;Park, Jae-Hong;Choi, Seong-Chul;Kim, Gwang-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.34 no.4
    • /
    • pp.700-708
    • /
    • 2007
  • A midline deviation is divided into three types, such as a skeletal midline deviation, a dental midline deviation, and a combination. Among them, the midline deviation which appear in the early mixed dentition without any skeletal problem can be managed differently by the stage of dental development. The location of the permanent incisors can be improved without using artificial force in consideration of the condition of the space, the eruption timing or the eruption path of the adjacent permanent teeth in early mixed dentition, especially when the permanent incisors are erupting. Therefore, the space supervision technique, which can have the teeth align themselves utilizing physiologic events such as sequence or timing of the eruption of permanent teeth, can be an alternative to orthodontic movement. This case report describes midline deviation improvement by space supervision.

  • PDF

Convergence change in a tunnel face approaching fault zones (파쇄대에 접근하는 터널의 내공변위 변화 해석)

  • Lee, In-Mo;Lee, Seung-Ju;Lee, Joo-Gong;Lee, Dae-Hyuck
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.4 no.3
    • /
    • pp.235-245
    • /
    • 2002
  • The purpose of this study is to figure out the tendency of tunnel convergence during excavation and to present a methodology for the prediction of a fault zone ahead of a tunnel face by analyzing three dimensional displacements in various ways. 3-D numerical analysis was performed to investigate changes of tunnel convergence vectors near a fault zone and to propose a flow chart for predicting fault zones. Results of the site investigation and results of trend line analysis of in-situ data were compared to verify the usefulness of a trend line analysis. It is concluded that the orientation of faults can be predicted by using stereonets and the direction of initial stresses can be predicted from the arm length of a displacement vector as a tunnel approaches fault zones. The results of the trend line analysis coincided with those of the site investigation, and a methodology for the prediction of a fault zone was proposed.

  • PDF

Development of 3D absolute displacement monitoring system and its application at the stage of tunnel construction (터널 시공 중 3차원 절대변위 계측시스템의 개발과 적용)

  • Bang, Joon-Ho;Kim, Ki-Young;Jong, Yong-Hun
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.9 no.3
    • /
    • pp.229-240
    • /
    • 2007
  • The 3D absolute displacement monitoring system has been developed to analyze the tunnel convergence measured under construction of underground structures and to manage effectively the measured data. The system is comprised of the total station, the anchor-typed target pin and the 3D absolute displacement measurement and management program. In this paper, the types and specifications of the 3D total station were presented. The anchor-typed target pin, an improved model of traditional one, was developed and its sightable distance and measurement accuracy were checked by field tests. Also a 3D absolute displacement measurement and management program, TEMS 3D, was developed to provide some analysis tools including the trend and influence lines. L/C ratio, S/C ratio and the like. The developed system was applied the construction stage of a railway tunnel for testing purpose. It is verified that the developed system is capable of predicting weak zones ahead of tunnel face by comparing with results of TSP (Tunnel Seismic Prediction) survey.

  • PDF

Displacement measurement in nanometer region and calibration of transducers using combined optical and x-ray interferometer (광/엑스선 복합간섭계를 이용한 나노미터 영역의 변위 측정 및 trnasducer의 비선형 교정)

  • Park Jin-Won;Jo Jae-Gun;Byun Sang-Ho;Eom Cheon-Il
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.515-518
    • /
    • 2005
  • 현재 정밀한 길이를 측정하기 위해서는 광 간섭계를 이용한 측정기술이 주로 사용되어지고 있다. 이러한 광 간섭계의 발전과 더불어 이보다 더 높은 분해능을 얻기 위해 광파장보다 1000배 정도 짧은 엑스선을 이용한 변위 측정 기술개발이 진행되고 있다. 본 연구에서는 이러한 엑스선을 이용한 간섭계를 제작하고, 광 간섭계와 결합된 광/엑스선 복합간섭계를 구성하여 광 간섭계가 안고 있는 자체의 비선형성이 제거된 정밀 변위 측정 시스템을 구성하였다. 그 응용으로써, 제작된 광/엑스선 복합간섭계를 이용하여 나노미터 영역에 서 사용하는 transducer의 비선형성을 측정하였다.

  • PDF

Sealing Performance Prediction of Thermoplastic Rubber Component using Non-linear Large Deformation F.E.M. (비선형 대변형 유한요소법을 이용한 열가소성 고무부품의 밀봉성능 예측)

  • Park, Sun;Lee, Shin-Young;Kang, Eun
    • Proceedings of the KSME Conference
    • /
    • 2001.06a
    • /
    • pp.669-673
    • /
    • 2001
  • The objective of this paper is to predict and evaluate the sealing performance of the thermoplastic rubber component in the proto-design stage. The large strain and large deformation properties of rubber are modeled by strain energy function and the related material constants are calculated from the test data. The viscoelastic property of the rubber is also considered using the coefficients in a Prony series representation of a viscoelastic modulus ken the compression stress relaxation test. The results show that the current design of cap mount system has 2-different stiffness caused by the cap-mount contact and the viscoelastic property of rubber plays an important role in time dependent deformation.

  • PDF

Comparative Analysis of Fault Prediction with Horizontal and Longitudinal Displacements on Tunnel (터널 굴진면 수평변위와 천단변위를 이용한 단층대 예측방법의 비교·분석)

  • Yun, Hyun-Seok;Seo, Yong-Seok
    • The Journal of Engineering Geology
    • /
    • v.26 no.3
    • /
    • pp.403-411
    • /
    • 2016
  • A three-dimensional finite element analysis was conducted to analyze the predictable distances of a fault zone by using longitudinal displacement on tunnel face, trend line, L/C ratio, and C/C0 ratio at tunnel crown. The analysis used 28 numerical models with various fault attitudes. As a result, those faults that have drives with dip could be predicted earliest in L/C and C/C0 ratio analysis. And those faults that have drives against dip could be predicted earliest in L/C ratio and longitudinal displacement analysis. In addition, the fault zone ahead of tunnel was predicted in most models by using longitudinal displacement, trend line, L/C ratio, and C/C0 ratio. However, the longitudinal displacement among these methods may be most usefully predict a fault zone since it is displacements can be measured immediately after tunnel excavation.