• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.63-74
• /
• 1996

Automatic transmission for heavy duty vehicles is a part of the power pack which includes steering and braking systems. This transmission in different from the one for passenger car. Therefore, in order to understand the trend of the important design parameters, maneuverability, acceleration performance and maximum speed, we need to analyze the total performance characteristics of the power transmission systems. In this study, modeling of the automatic transmission in heavy duty vehicle is carried out and the performance analysis method is presented. Results can be used for performance estimation data in the analysis for several combination method which determines the optimal parameters on the basis of penalty functions and weightings. And the estimation method of the important performance parameters such as engine inertia or power loss of engine by experiments is presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.4
• /
• pp.84-90
• /
• 2022

In this study, the acceleration performance improvement was analyzed for a 2-speed transmission applied EV. An EV simulator was developed to analyze the EV acceleration performance. The EV simulator includes a load transfer model between the front and rear. Thus, the EV simulator can analyze the acceleration performance difference between the front-and rear-wheel drive EVs. From the simulation results, it is deduced that the acceleration performance can be improved by 7.96% for the front-wheel drive EV and 16.10% for the rear-wheel drive EV. The 2-speed transmission can improve the acceleration performance without decreasing its maximum velocity. Moreover, the 2-speed transmission can improve the acceleration performance of the rear wheel drive more than that of the front-wheel drive EV.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.86-94
• /
• 1984

In order to improve the rotational performances of NC lathe spindle system in high speed range, a new type(Floating-type driven by V-belt)spindle system was optimally designed and experimented. Through the results of the experiments, the rotational performances of the new type spindle system was discussed and compared with the three equivalent conventional lathe spindle systems. The spindle rotational accuracy( radial error motion of spindle axis), the accelation and the temperature rise of the front spindle bearings for the non-cutting operation were considered as the spindle rotational performances. The radial error motion of the spindle axis was measured by applying the modified L.R.L. method. Compared with the equivalent conventional spindle systems, the following results were obtained. (1) The new type spindle system reduces the radial error motion of the spindle axis in high speed range(1800rpm-2000rpm). (2) The new type spindle system reduces the acceleration and the temperature rise of the spindle bearings considerably with increasing the spindle speed. It is also confirmed that, by this new type spindle system, the max. allowable speed can be increased with satisfying the spindle rotational performances.

• Annual Conference on Human and Language Technology
• /
• 2020.10a
• /
• pp.237-240
• /
• 2020

사전학습 언어모델은 다양한 자연어처리 작업에서 높은 성능을 보였다. 하지만, 사전학습 언어모델은 문장 내 문맥 정보만을 학습하기 때문에 단어간 의미관계 정보를 추론하는데는 한계가 있다. 최근에는, 사전학습 언어모델이 어느수준으로 단어간 의미관계를 이해하고 있는지 다양한 Probing Test를 진행하고 있다. 이러한 Test는 언어모델의 강점과 약점을 분석하는데 효율적이며, 한층 더 인간의 언어를 정확하게 이해하기 위한 모델을 구축하는데 새로운 방향을 제시한다. 본 논문에서는 대표적인 사전 학습기반 언어모델인 BERT(Bidirectional Encoder Representations from Transformers)의 단어간 의미관계 이해도를 평가하는 3가지 작업을 진행한다. 첫 번째로 단어 간의 상위어, 하위어 관계를 나타내는 IsA 관계를 분석한다. 두번째는 '자동차'와 '변속'과 같은 관계를 나타내는 PartOf 관계를 분석한다. 마지막으로 '새'와 '날개'와 같은 관계를 나타내는 HasA 관계를 분석한다. 결과적으로, BERT_base 모델에 대해서는 추론 결과 대부분에서 낮은 성능을 보이지만, BERT_large 모델에서는 BERT_base보다 높은 성능을 보였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.62-73
• /
• 2020

Access management is aimed at preserving the road's high intercity mobility. In urbanized areas, immoderate acceleration lane-length requirements restrict the accessibility of land. Therefore, there are many opinions to revise the minimum acceleration lane-length requirement. For this purpose, it is important to diagnose the effects of slow vehicles on the mainline. This study analyzed a single merging vehicle's total delay occurrence depending on the mainline traffic flow rate and merging speed. A linear relationship was observed between the mainline traffic flow rate and total delay. As a merging speed increases gradually from 40km/h to 100km/h in 20km/h intervals, the total delay decreases by 5.0, 1.6, and 5.1 times, respectively. This shows that the ideal condition with the total delay is less than 0.5 vehicle·sec when there is no speed difference between the mainline and merging vehicle. On the other hand, given the one-second response time of drivers, the total delay occurrence was slightly low when the speed difference between the mainline and merging vehicle was less than 20km/h.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.9-20
• /
• 1990

The speed ratio-torque load-axial force characteristics of a rubber V-belt (RVB) and a metal V-belt (MVB) CVT are investigated and their performances are compared. It is found that power is transmitted by tension difference in RVB, and by thrust difference in MVB. The nondimensional equations for speed ratio-torque load-axial force of RVB are exactly same as those of MVB. However, actual characteristics of axial forces of RVB and MVB are different depending on their power transmission methods. The torque capacity of MVB is 5-6 times higher than that of RVB due to MVB's higher strength, even if the required axial force of MVB CVT control is 3-4 times higher than that of RVB.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.182-186
• /
• 2007

This paper studied performance characteristics of hybrid automotive to replace existing fossil fuel vehicles. Specially, about power split type HEV that is T-HEV's drive system when a vehicle drives at steady speed, monitored both output of each engine, motor and generator and battery SOC (state of charge) and analyzed performance characteristic of power transmission system and electricity power parts. This study shows those that acquired and analyzed information from signals between HCU and each controller of actual T- vehicle. From this study, it is confirmed that each conditions of EV and HEV drive can be a improvement with respect to the fuel efficiency of vehicles.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.383-386
• /
• 2001

최근 선진 자동차 회사에서는 변속기 개발 단계에서 기어 소음 문제를 해결하고 차량의 소음 품질을 향상시키기 위하여 많은 연구가 수행되고 있다. 그러나, 설계 단계에서 기어 소음을 고려한 기어 제원 결정이 불가능하여, 설계 완료 후 개발 단계에서 기어 소음 문제를 해결하는 것이 매우 어려운 일이었고, 설사 가능하여도 시간적, 성능적인 한계가 있었다. 기어 소음은 크게 Source 와 전달경로의 문제로 나누어지고, 본 연구는 주로 전자에 중점을 둘 것이며, 기어 화인 소음의 주 요인으로 알려져 있는 기어의 전달 오차를 최소화하는 것이다. 그 방법으로 기어 설계의 선진 핵심 기술인 기어 해석을 통한 기어 화인 소음을 최소화하는 최적 기어 설계 제원 결정이다.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.71-76
• /
• 2010

This study has investigated numerically and experimentally the flow characteristic of air-cooling fan for transmission oil cooler in the large-size diesel engine. Impellers of cooler were composed of eight normal-scale and eight small-scale blades in the zig-zag pattern. In order to increase the discharge pressure of cooling fan, turbo type of fan blade is proposed in the impeller for transmission oil cooler. The fluidic performance of cooling fan has been estimated numerically by using the commercial code and experimentally carried out with reference on AMCA Standard 210-99. As a result, it is confirmed that the numerical result for performance curve is in good agreement with experimental data.