• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.53-55
• /
• 2002

본 연구는 자동차 급발진 사고에 관한 안전장치 개발에 그 목표를 두고 있다. 최근들어서 자동차 급발진 사고는 사회문제화되고 있고, 인명피해뿐만 아니라 자동차회사와 소비자간의 법적 피해 보상문제가지도 대두되고 있으며, 최근 자동차 설계구조의 문제가 있다는 법적 해석이 나오기도 했다. 본 연구는 자동변속기를 장착한 자동차의 급발진 방지용 변속레버 제어장치에 관한 것으로 구체적으로는 브레이크 페달을 밟고 있어야 변속레버조작이 이루어지도록 한 변속레버 제어수단을 솔레노이드 작동에 의한 스토퍼로 제어하되 스토퍼를 걸림 작동부로 간편하고 있도록 한 안전장치이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.242-247
• /
• 2003

This paper deals with an optimal design methodology for an automatic transmission lever using a genetic algorithm. A component of an automatic transmission lever has been designed sequentially in the industry, but the study presents a new design method to consider the design parameters of components simultaneously. A genetic algorithm approach is described to determine a set of design parameters for an automatic transmission lever. We have attempted to model the design problem with the objective of minimizing the angle variation of detent spring subject to constraints such as modulus of elasticity of steel, geometry of shift pipe. and stiffness of spring. The proposed method can give the better design alternative.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.537-538
• /
• 2015

최근 자전거의 활용범위가 출퇴근뿐만 아니라, 친환경 헬스케어 부각으로 자전거 타는 것에 많이 이용되고 있는 실정이다. 근래 몇 년 사이에 정부에서도 자전거 전용도로를 도시외각뿐만 아니라 자전거로 출퇴근 이용자들을 위해 안전하게 운행할 수 있도록 자전거 전용도로를 전국에 확대설치 하여 자전거 보급을 확대 하고 있다. 하지만 현재 국내에 많이 보급되어 있는 자전거는 대부분이 외국에서 반제품이 수입되어 국내에서 완제품으로 조림하여 판매되는 제품들이 주를 이루고 있으며, 자전거 부품 중에도 최근 외국에서 개발이 진행되고 있는 전자변속기 또한 외국의 기술들이 도입되어 제품들이 출시되고 있는 실정이다. 이에 외국의 기술적 우위로 인하여 한국의 자전거 산업발전에 어려움이 많은 것이 현실이다. 본 연구에서는 리니어모터를 이용하여 디지털 전동 변속기를 개발 하여, 변속의 신속성, 정확성을 확보하면서, 동시에 외국의 기술적 장벽을 넘고자 한다. 현행 자전거 뒤 변속기의 정확한 변위위치 확보하기 위하여 자전거 핸들에 장착되어 있는 변속레버를 디지털화 하여, 변속을 제어하게 되면 뒤쪽에 설치되어 있는 리니어모터를 위치 제어함으로써 가이드 샤프트 피치에 의하여 변속위치가 정밀하게 제어 할 수 있는 전동 변속기 제어시스템을 제안하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.41-46
• /
• 2007

This article deals with the design and prototyping of Shift-By-Wire system for an automatic transmission equipped vehicle. In order to manipulate the shifting action electronically, Shift-By-Wire system consists of an electronic shift lever, an electric shift actuator and position sensors. The shift lever is designed to transform the driver's shifting command into an electric signal; it includes the position sensor using non-contact type hall sensor and an additional shifting switch acting as Tip-tronic. For the design of an electric shifting actuator, we investigated the stroke angles and shifting efforts of the manual control lever in each shifting section. And the position sensor of the shifting actuator is designed by using a potentiometer with an optical encoder. Finally the prototype of Shift-By-Wire system was built in a conventional 2.4L class SUV vehicle, and we performed road tests in order to verify its performance.

• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.107-113
• /
• 1990

This study was attempted to develop a remote controllable speed sprayer in order to protect an operator from agricultural chemicals. For the purpose of remote controllable transmission was developed by using one chip microcomputer. The following results could be summarized in this study. 1. Remote controllable transmission developed had not made even a single mistake during the test performed 100 times repeat. Thus, it could that this machine was very accurate. 2. One chip microcomputer was made by machine language and its was with in 3 sec's which was the same as human did. 3. One chip microcomputer which was used in the experiment could be widely used to automation of agricultural machinery, since it is smaller and chiper than any other similar ones such as personal computer, lap tap, one board computer. 4. Since, farm tractor has the same type of transmission as this system, it also could be adapted to farm tractors. 5. In this experiment, transmission lever was remote controll were designed to operate simultaneously. Thus, this system developed was more complicate than conventional system. However, by removing this transmission lever and by mounting the remote controll system at the speed sprayer, it would be higher and easier to handle than the conventional one.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.622-626
• /
• 2001

Every design activity has a goal of satisfying a set of functional requirement. The commencement of a design, therefore, must have its foundation upon the identification of the functional requirements. Many of the design practices of the industrial examples can be categorized as design of small systems that are defined to have limited and fixed sets of functional requirements to be satisfied at all times. In the case of small systems it facilitates the construction of a knowledge-based system for a specific purpose to decompose the functional requirement and map ones in the lowest level into specific design features. When the number of design features is large, they need to be managed by groups. This paper suggests a grouping method for design process can be regarded as a series of selections of the predefined functional primitives according to the requirements and the preceding selections. An intelligent product design system for automatic transmission lever design is developed as an example.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.57-65
• /
• 2016

The power flow of an 8-speed automatic transmission was analyzed using a lever analogy for the manufacturing of planetary gears. From the analysis, we found that the engine power was split between the first and second double-pinion planetary gears (DPPG1 and DPPG2), and was then passed to the DPPG3 for the fourth speed. For the fifth speed, the engine power was split between the DPPG1 and DPPG3. For the speeds 6-8, the engine power was passed only to SPPG2, while the seventh speed contained the power circulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.763-767
• /
• 2002

This paper explores a structuring method for solid modeling processes of an automobile automatic transmission-lever design. The aim of this work is to establish standard procedures to minimize iterations and trial and errors during the product development process to increase development time and costs. The design of the transmission-lever is periodically required to be changed with the model change of an automobile. The transmission-lever design process has mainly depended on the designer's experience. It causes to make difficulties to handle the dependency of components. The design process can be improved by resolving the dependency problem using the DSM. The process of applying the DSM provides a systematic way for the solid modeling of transmission-lever by the consideration of geometry dependency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.5
• /
• pp.48-56
• /
• 2016

In this paper, we analyze the power flow of an eight-speed automatic transmission by using a lever analogy for the manufacturing of planetary gears. The results indicate that the engine power is passed down to the carrier and ring gear in the first double pinion planetary gear (DPPG1), and to the sun gear, carrier, and ring gear in DPPG3 for the first speed. Although the power flow is similar in the second speed, the power circulation occurs in the second single pinion planetary gear (SPPG2). For the third speed, the engine power is passed from the carrier to the ring gear in DPPG, at which point the power is split between the sun gears of SPPG2 and DPPG3.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.5
• /
• pp.550-557
• /
• 2008

A transmission control cable connects the transmission control arm and the control lever mechanically and transfers control effort exerted by a driver to the transmission. It also transfers vibration generated by the engine to the passenger room through mechanical connection. To understand vibration and noise transfer mechanism and to further find a way to suppress the transmission of vibration effectively, a dependable dynamic vibration model is a necessity. A vibration model for a transmission control cable is developed and a simulation study has been conducted to obtain mode frequencies and a transmittability. The resonance frequencies obtained by an harmonic analysis is compared with the noise level measurement data. The measurement agrees with the simulation result thus ensures the reliability of the model.