• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.635-646
• /
• 1995

Mineralized zone in the Dongyang talc deposits occurs on the lowest dolomite member of the Hyangsanri Dolomite belonging to the Ogcheon Supergroup. Ore bodies are emplaced as pipe-like body along the axis of minor folds plunging $40^{\circ}$ to the west developed in these dolomite layers. Amphibolite and chlorite schist are found along the upper or lower contact of all ore bodies (Kim et al., 1963; Park and Kim, 1966). Following the recrystallization and silicification of dolomite, tremolite and tabular and leafy talc(I) of the earlier stage formed, and microcrystalline talc(II) formed in the later stage. Talc(l) and tremolite formed by the reaction between dolomite and the fluid. Whereas talc (II) formed by the reaction between dolomite and fluid, or by the reaction between early formed tremolite and fluid. During the early stage of mineralization, the fluid was the $H_2O-CO_2$ system dominant in $CO_2$, In the later stage, the composition of the fluid changed to $H_2O-NaCl-CO_2$system, and finally to the $H_2O-NaCl$ system. The pressure and temperature conditions of the formation of tremolite associated with talc(I) were 1,640~2,530 bar, and $440{\sim}480^{\circ}C$, respectively. The pressure and temperature condition of talc(II) ore formation was 1,400~2,200 bar, and $360{\sim}390^{\circ}C$, respectively. These conditions are much lower than the metamorphic pressure and temperature of the rocks from the Munjuri Formation located about 5 km to the noJ:th of Dongyang talc deposit ${\delta}^{13}C$ and ${\delta}^{18}O$ values of dolomite which is the host rock of the talc ore deposit are 2.9~5.7‰ (PDB), and -7.4~l6.8‰ (PDB), respectively. These values are little higher than those from the Cambro-Ordovician limestones of the Taebaeksan region, but belong to the range of the unaltered sedimentary dolomite. ${\delta}^{18}O$and ${\delta}D$ values of the talc from Dongyang deposit are 8.6~15.8‰ (vs SMOW), and -65~-90‰ (vs SMOW), respectively, belonging to the range of magmatic origin. These values are quite different from those measured in the metamorphic rocks of Munjuri and Kyemyungsan Formation. ${\delta}^{34}S$ value of anhydrite is 22.4‰ (CDT), which is much lower than ${\delta}^{34}S$ (30‰ vs COT) of sulfate of early Paleozoic period, and indicates the possibility of the addition of magmatic sulfur to the system. Talc ores show the textures of weak foliation and well developed crenulation cleavages. Talc ore deposit in the area is concluded as hydrothermal replacement deposit formed before the latest phase of the deformations that Ogcheon Belt has undergone.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.31-37
• /
• 1985

N-Acetyl-1-phenylalanyl-1-phenylalanine methyl ester (APhPhMe), N-acetyl-l-phenylalanine methyl ester (APhMe) and N-acetyl-1-phenylalanyl-1-alanine methyl ester (APhAlMe) were used as model compounds to investigate a protein denaturation under various temperatures and pressures. Overall, the solubility of APhPhMe in water increased with increasing pressure and that of APhMe decreased. However, the solubility of APhAlMe was nearly same. The values of volume change of APhPhMe were -0.9, -1.47, -1.09, -1.52 ml/mole at 20, 30, 40 and 50$^{\circ}C$, respectively, and those of APhMe were +6.0, +7.0, +7.5 ml/mole at 20, 30 and 40$^{\circ}C$, respectively. But those of APhAlMe were nearly zero at the measured temperature. The experimental result seems to be explained by the hydrophobic interaction and hydrogen bond of peptide bonds. In the compounds which have only peptide bonds and which have both a pretty large hydrophobic group and a peptide bond in the molecules, the hydrogen bond between peptide bonds is more dominant than the hydrophobic interaction. However, when the number of peptide bond and hydrophobic group increase simultaneously, the hydrophobic interaction seems to be more dominant.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.1
• /
• pp.34-41
• /
• 1992

The Precambrian granitic gneisses are widely distributed in the Danyang-Yecheon area, eastern part of Korea, where the Ryeongnam massif borders the Ogcheon fold belt. They are composed of migmatitic, biotite granitic, garnet-bearing and granoblastic granitic gneisses. The common joint sets of the granitic gneiss are NE and NS directions, which are probably related to the effects of Daebo orogeny and Bulgugsa disturbance, respectively. Mineral assemblages of the banded gneiss xenolith in the garnet-bearing granitic gneiss are quartz-plagioc1ase-biotite-mus-covite-orthoclase and quartz-plagioc1ase-biotite-garnet, belonging to the amphibolite facies. The granoblastic granitic gneiss is felsic, metaluminous, and granitic, and shows subalkaline trend. The garnet-biotite geothermometry of garnet-bearing granitic gneiss yields 640$^{\circ}$-708$^{\circ}C$ at pressure of 4 kb.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.107-120
• /
• 2021

The Komdok Pb-Zn deposit, which is the largest Pb-Zn deposit in Korea, is located at the Hyesan-Riwon metallogenic zone in Jiao Liao Ji belt included Paleoproterozoic Macheolryeong group. The geology of this deposit consists of Paleoproterozoic metasedimentary rocks, Jurassic Mantapsan intrusive rocks and Cenozoic basalt. The Komdok deposit which is a SEDEX type deposit occurs as layer ore and vein ore in the Paleoproterozoic metasedimentary rocks. Based on mineral petrography and paragenesis, dolomites from this deposit are classified four types (1. dolomite (D₀) as hostrock, 2. early dolomite (D₁) associated with tremolite, actinolite, diopside, sphalerite and galena from amphibolite facies, 3. late dolomite (D₂) associated with talc, calcite, quartz, sphalerite and galena from amphibolite facies, 4. dolomite (D₃) associated with white mica, chlorite, sphalerite and galena from quartz vein). The structural formulars of dolomites are determined to be Ca_1.00-1.20Mg_0.80-0.99Fe_0.00-0.01Zn_0.00-0.02(CO₃)₂(D₀), Ca_1.00-1.02M_0.97-0.99Fe_0.00-0.01Zn_0.00-0.02(CO₃)₂(D₁), Ca_0.99-1.03Mg_0.93-0.98Fe_0.01-0.05Mn_0.00-0.01As_0.00-0.01(CO₃)₂(D₂) and Ca_0.95-1.04Mg_0.59-0.68Fe_0.30-0.36Mn_0.00-0.01 (CO₃)₂(D₃), respectively. It means that dolomites from Komdok deposit have higher content of trace elements (FeO, MnO, HfO₂, ZnO, PbO, Sb₂O₅ and As₂O₅) compared to the theoretical composition of dolomite. These trace elements (FeO, MnO, ZnO, Sb₂O₅ and As₂O₅) show increase and decrease trend according to paragenetic sequence, but HfO₂ and PbO elements no show increase and decrease trend according to paragenetic sequence. Dolomites correspond to Ferroan dolomite (D₀, D₁ and D₂), and Ferroan dolomite and ankerite (D₃), respectively. Therefore, 1) dolomite (D₀) as hostrock was formed by subsequent diagenesis after sedimentation of Paleoproterozoic (2012~1700 Ma) silica-bearing dolomite in the marine evaporative environment. 2) Early dolomite (D₁) was formed by hydrothermal metasomatism origined metamorphism (amphibolite facies) associated with intrusion (1890~1680 Ma) of Paleoproterozoic Riwon complex. 3) Late dolomte (D₂) was formed from residual fluid by a decrease of temperature and pressure. and dolomite (D₃) in quartz vein was formed by intrusion (213~181 Ma) of Jurassic Mantapsan intrusive rocks.

• Economic and Environmental Geology
• /
• v.34 no.2
• /
• pp.157-166
• /
• 2001

Numerous base-metal bearing hydrothermal quartz vein deposits occur in the Hunan province of southern China. The Tangguanpu lead-zinc-tin-silver mine is the major producer among these deposits. Lead-zinc-tin-silver mineralization occurs in a single stage of massive quartz veins which filled fractures in fault zones within Paleozoic metasedimentary rocks. Sphalerite, chalcopyrite, galena, pyrite, arsenopyrite and pyrrhotite are the principal sulphide minerals in the Tangguanpu lead-zinc ores with minor amounts of tin- and antimony-bearing sulphides (stannite, teallite, boulangerite and tetrahedrite). Based on the iron and zinc partitioning between coexisting stannite and sphalerite, the formation temperature for this mineral assemblage range from 300$^{\circ}$ to 330$^{\circ}$C, which relatively agree with the upper part of homogenization temperature of fluid inclusion in quartz (20T-358$^{\circ}$C). Fluid inclusion data show that main lead-zine-tin-silver mineralization occurred from $H_{2}O$-NaCl fluids with relatively low salinities (11.2-7.3 wl.% eg. NaCI) at temperatures between 207$^{\circ}$ and 358$^{\circ}$C. The relationship between homogenization temperature and salinity suggests a history of cooling and dilution followed by initial boiling. Evidence of initial fluid boiling may indicate the fluid trapping pressures of 180 bars. The ${\delta}^{34}S{{\Sigma}S}$ values of -5.0 to 1.1 %, indicate an igneous source of sulfur in the Tangguanpu lead-zinc-tin-silver hydrothermal fluids.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.767-785
• /
• 2021

World-class magnesite deposits are developed in the Dashiqiao mineralized district of the Jiao-Liao-Ji Belt in China. This belt extends to the northern side of the Korean Peninsula and hosts major magnesite deposits in the Dancheon region of North Korea. Magnesite ores from the Pailou deposits in the Dashiqiao district is classified into pure magnetite, chlorite-magnetite, chlorite-talc-magnetite, and dolomite groups depending on the constituent minerals. According to the result of petrographic study, magnesite was formed by the alteration of dolomite, and, talc, chlorite, and apatite were produced as late-stage alteration minerals that replaced the magnesite. Fluid inclusions observed in magnesite are a liquid-type inclusion, with a homogenization temperature of 121-250 ℃ and a salinity of 1.7-22.4 wt% NaCl equiv. The chlorite geothermometer, indicating the temperature of hydrothermal alteration, is 137~293 ℃, slightly higher than the homogenization temperature of fluid inclusions, and the pressure is calculated to be less than 3.2 kb. For magnesite mineralization in the study area, the initially formed-dolomite was subjected to replacement by Mg-rich fluid to form a magnesite ore body, and then it was enriched through regional metamorphism and hydrothermal alteration. It seems that altered minerals such as talc were crystallized by Si and Al-rich late-stage hydrothermal fluids. These results are similar to the genetic environments of the Daeheung deposit, a representative magnesite deposit in North Korea, and it is believed that the two deposits went through a similar geological and ore genetic process of magnesite mineralization.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.1 s.51
• /
• pp.47-60
• /
• 2007

While sedimentological researches on Western coastal tidal flats of Korea have been much pelformed previously, mineralogical and biogeochemical studies are beginning to be studied. The objectives of this study were to investigate mineralogical characteritics of the inter-tidal flat sediments and to explore phase transformation of iron(oxyhydr)oxides and biomineralization by metal-reducing bacteria enriched from the inter-tidal flat sediments from Muan, Jeollanam-do, Korea. Inter-tidal flat sediment samples were collected in Chungkye-myun and Haeje-myun, Muan-gun, Jeollanam-do. Particle size analyses were performed using the pipette method and sedimentation method. The separates including sand, silt and clay fractions were examined by scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM), and X-ray diffiaction (XRD). After enriching the metal-.educing bacteria from the into,-tidal flat sediments, the bacteria were used to study phase transformation of the synthesized iron (oxyhydr)oxides and iron biomineralization using lactate or glucose as the electron donors and Fe(III)-containing iron oxides as the electron accepters. Mineralogical studies showed that the sediments of tidal flats in Chung]rye-myun and Haeje-myun consist of quartz, plagioclase, microcline, biotite, kaolinite and illite. Biogeochemical researches showed that the metal-reducing bacteria enriched from the inter-tidal flat sediments reduced reddish brown akaganeite and mineralized nanometer-sized black magnetite. The bacteria also reduced the reddish brown ferrihydrite into black amorphous phases and reduced the yellowish goethite into greenish with formation of nm-sized phases. These results indicate that microbial Fe(III) reduction may play one of important roles in iron and carbon biogeochemistry as well as iron biomineralization in subsurface environments.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.2
• /
• pp.129-134
• /
• 1996

Possibile phase transitions of graphite have been examined experimentally using piston cylinder and DAC with synchrotron radiation. The graphite-forming processes in high pressure and low temperature conditions and the phase change under super high pressure were studied in the conditions of 0.7 Gpa and 270-$360^{\circ}C$ in piston cylinder and under 39.6 Gpa in DAC. In the piston cylinder experiment using LiCO3as a catalyzer, we could synthesize disordered graphites whose TGD values change progressively form 9 to 53. It was known that the temperature of graphitization in 0.7 Gpa is between 270-$300^{\circ}C$. Numerous unknown XRD peaks were observed in the super high-pressure experiment. However, it is difficult to pick up a new peak of a hexagonal diamond phase. Application of the different high pressure apparatus as well as a peculiar X-ray source and various graphite specimen would be useful for super high-pressure experiment, and more detailed works are needed to characterize the unknown phase(s) observed in this study.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.391-405
• /
• 2003

The Daebong gold-silver deposit consists of mesothermal massive quartz veins thar are filling the fractures along fault shear (NE, NW) Bones within banded or granitic gneiss of Precambrian Gyeonggi massif. Based on vein mineralogy, ore textures and paragenesis, ore mineralization of this deposits is composed of massive white quartz vein(stage I) which was formed in the same stage by multiple episodes of fracturing and healing, and transparent quartz vein(stage II) which is separated by a major faulting event. Stage I is divided into the 3 substages. Ore minerals of each substages are as follows: 1) early stage I=magnetite, pyrrhotite, arsenopyrite, pyrite, sphalerite, chalcopyrite, 2) middle stage I=pyrrhotite, arsenopyrite, pyrite, marcasite, sphalerite, chalcopyrite, galena, electrum and 3) late stage I=pyrite, sphalerite, chalcopyrite, galena, electrum, argentite, respectively. Ore minerals of the stage II are composed of pyrite, sphalerite, chalcopyrite, galena and electrum. Systematic studies (petrography and microthermometry) of fluid inclusions in stage I and II quartz veins show fluids from contrasting physical-chemical conditions: 1) $H_2O-CO_2-CH_4-NaCl{\pm}N-2$ fluid(early stage I=homogenization temperature: 203∼3$88^{\circ}C$, pressure: 1082∼2092 bar, salinity: 0.6∼13.4 wt.%, middle stage I=homogenization temperature: 215∼28$0^{\circ}C$, salinity: 0.2∼2.8 wt.%) related to the stage I sulfide deposition, 2) $H_2O-NaCl{\pm}CO_2$ fluid (late stage I=homogenization temperature: 205∼2$88^{\circ}C$, pressure: 670 bar, salinity: 4.5∼6.7 wt.%, stage II=homogenization temperature: 201-3$58^{\circ}C$, salinity: 0.4-4.2 wt.%) related to the late stage I and II sulfide deposition. $H_2O-CO_2-CH_4-NaCl{\pm}N_2$ fluid of early stage I is evolved to $H_2O-NaCl{\pm}CO_2$ fluid represented by the $CO_2$ unmixing due to decrease in fluid pressure and is diluted and cooled by the mixing of deep circulated meteoric waters ($H_2O$-NaCl fluid) possibly related to uplift and unloading of the mineralizing suites. $H_2O-NaCl{\pm}CO_2$ fluid of stage II was hotter than that of late stage I and occurred partly unmixing, mainly dilution and cooling for sulfide deposition. Calculated sulfur isotope compositions ({\gamma}^{34}S_{H2S}$) of hydrothermal fluids (3.5∼7.9%o) indicate that ore sulfur was derived from mainly an igneous source and partly sulfur of host rock. Measured and calculated oxygen and hydrogen isotope compositions ({\gamma}^{18}O_{H_2O}$, {\gamma}$D) of ore fluids (stage I: 1.1∼9.0$\textperthousand$, -92∼-86{\textperthansand}$, stage II: 0.3{\textperthansand}$, -93{\textperthansand}$) and ribbon-banded structure (graphitic lamination) indicate that mesothermal auriferous fluids of Daebong deposit were two different origin and their evolution. 1) Fluids of this deposit were likely mixtures of $H_2O$-rich, isotopically less evolved meteoric water and magmatic fluids and 2) were likely mixtures of $H_2O$-rich. isotopically heavier $\delta$D meteoric water and magmaticmetamorphic fluids.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.167-175
• /
• 2009

The geology of Sepola district in Mali is consisted of Birrimian group with metasedimentary rocks of lower Proterozoic and volcanoclastics, and later intrusive igneous rocks. Ore diposit in this district has the characteristics of vein- and disseminated-type gold deposit which was formed by infilling the secondary fracture zones related to the large-scale fault zone of NW direction within Birrimian group. It is confirmed as promising that Barani district has the gold grade of 0.53${\sim}$9.21 g/t with the extension of 1.3 km and width of 1 to 20.1 m. The ore mineralogy is simple with electrum, pyrite and galena. Fineness of gold grain ranges from 848 to 915(average 891) indicating mesothermal to hypothermal environment. Fluid inclusions are classified as liquid-rich type I. gas-rich type II and liquid-$CO_2$ bearing type III. Primary and pseudosecondary inclusions homogenize from 236 to 393$^{\circ}C$ with salinity of 0.0 to 8.6 wt% NaCl. Secondary inclusions homogenize from 103 to 184$^{\circ}C$ with salinity of 0.7 to 8.6 wt.%. From the relationship between homogeniztion temperature and salinity, it may be thought that auriferous fluid experienced dilution and cooling through inflow of meteoric water after fluid unmixing derived from pressure decrease in the temperature range of 400 to 250$^{\circ}C$. From the massive occurrence of quartz vein, simple mineralogy with paucity of sulfide, and presence of liquid-$CO_2$ bearing with high homogenization temperature, it is thought that gold mineralization in Sepola district correspods to the mesothermal to hypothermal ore deposit.