• Title/Summary/Keyword: 변곡선

Search Result 338, Processing Time 0.028 seconds

The Variation of Hydrologic Performance Characteristics for Small Hydro Power Plant with Rainfall Condition (강우상태에 의한 소수력발전소의 수문학적 성능특성 변화)

  • Park, Wan-Soon;Lee, Chul-Hyung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.1369-1372
    • /
    • 2008
  • 소수력자원은 신재생에너지 중에서도 온실가스 배출량이 가장 적고 에너지밀도가 매우 높기 때문에 개발할 가치가 큰 청정부존자원으로 평가되고 있다. 강우상태의 변화는 Weibull분포의 축척모수와 형상모수를 인위적으로 변화시켜 소수력발전소의 설계인자들의 변화를 모사하였다. 분석 결과, 소수력발전입지의 수문학적 성능특성은 해당유역의 강우상태에 따라 변하는 것으로 밝혀졌다.

  • PDF

A Study on Small-signal and Large-signal Equivalent Model for Diodes (다이오드의 소신호 및 대신호 등가모델에 관한 연구)

  • 최민수;양승인;전용구
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2001.11a
    • /
    • pp.267-271
    • /
    • 2001
  • 다이오드의 소신호 및 대신호 파라미터 추출은 DC 해석, 외부 기생 소자 추출, 마지막으로 5-파라미터에 의한 내부소자 추출로 이루어진다. DC IV-곡선과 S-파라미터의 curve-fitting으로 내부 파라미터를 구하였고 외부 기생소자는 바이어스에 따라 변하지 성질을 이용하였다. 사용된 소자는 Schottky diode는 SIEMENS사의 BAS125를, Varactor diode는 SONY사의 1t362를, PIN diode는 Hitachi사의 HVM14S를 모델로 사용하였다. 실측을 위해 사용된 소자는 각각 HP사의 HSMS-2822, SONY사의 1t362, HP사의 HSMP-3834을 이용하여 측정하였다.

  • PDF

유역분할특성에 따른 유출비교에 관한 연구

  • Park, Gi-Bum;Go, Jin-Suk;Song, Si-Hoon
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2005.11a
    • /
    • pp.161-166
    • /
    • 2005
  • 본 연구에서는 유역분할 특성에 따른 하천유역의 도달시간을 산정하였으며, 산정된 도달시간을 이용하여 홍수량을 비교하였다. 분석결과 소유역 분할 수가 많을수록 각 방법에 따른 첨두홍수량의 차이는 크게 나타나는 것으로 나타났다. 이는 각 매개변수의 적용에 따른 차이가 수문곡선의 중첩으로 인하여 하류지점인 용곡지점에서 첨두치의 차이가 더욱 크게 나타나는 것으로 판단된다. 또한 실측자료와 비교한 결과 실측 자료의 경우 도달시간이 홍수량이 변하여도 일정하게 산정되는 반면 모델에 의한 계산된 홍수량은 실측홍수량과 비교하여 도달시간이 짧게 산정되었다.

  • PDF

Free Vibrations of Stepped Circular Arcs (불연속 변단면을 갖는 원호 곡선부재의 자유진동)

  • 오상진;진태기;최규문;이종국
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2002.05a
    • /
    • pp.429-434
    • /
    • 2002
  • The differential equations governing in-plane free vibrations of stepped circular arcs, including the effects of axial deformation, rotatory inertia and shear deformation, are derived and solved numerically to obtain frequencies and mode shapes. Numerical results are calculated for the clamped-clamped symmetric and unsymmetric circular arcs with thickness varying in a discontinuous fashion. The lowest four natural frequencies and mode shapes are presented over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the section ratio and the ratio of discontinuous section.

  • PDF

Using Linear Clustering for Broadcasting to support Location Dependent Query in Mobile Computing Environment (이동 컴퓨팅 환경에서 위치 의존 질의에 적합한 선형 클러스터링을 이용한 브로드캐스팅 기법)

  • 정일동;유영호;이중화;신지현;김경석
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2001.10a
    • /
    • pp.241-243
    • /
    • 2001
  • 이동 컴퓨팅 환경에서 이동 호스트의 위치가 변함에 따라 그 의미가 달라지는 위치 의존 질의를 효과적으로 처리하기 위해서는 이동 호스트의 캐시 기법이 중요하지만, 위치 의존 질의를 효과적으로 지원할 수 있는 지구국의 브로드캐스팅 기법도 중요하다. 본 논문에서는 지구국이 담당하는 영역을 격자로 나누어 인덱싱한 데이터를 위치 의존 질의에 적합하도록 공간-채움 곡선을 이용해서 선형 클러스터링하여 구성 시간을 줄이는 브로드캐스팅 기법을 제안하고, 구성 시간을 포함시킨 이동 호스트의 활동 시간을 측정하여 그 성능을 비교한다.

  • PDF

Proposed Optimized Column-pile Diameter Ratio with Varying Cross-section for Bent Pile Structures (단일 현장타설말뚝의 변단면 분석을 통한 최적 기둥-말뚝 직경비 제안)

  • Kim, Jaeyoung;Jeong, Sangseom;Ahn, Sangyong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.5
    • /
    • pp.1935-1946
    • /
    • 2013
  • In this study, the behavior characteristics of bent pile structures with varying cross-section was examined through the measured results of field load test. A framework for determining the bending stress is calculated based on the stresses in the circumference of the pile using 3D finite element analysis. It is found that the bending stress near the pile-column joint changes rapidly and fracture zones occurs easily at variable cross-sections in bent pile structures. Also, the optimized column-pile diameter ratio was analyzed through the relationship between the column-pile diameter ratio and lateral crack load ratio. Based on this study, the optimized column-pile diameter ratio can be obtained near the inflection point of the curve between the column-pile diameter ratio and lateral crack load ratio. Therefore, a present study by considering the optimized variable cross-section condition would be improved bent pile structures design.

Growth Curve Characteristics of Bull and Steer of Hanwoo(Korean Cattle) (한우 거세 및 비거세우의 성장곡선 특성)

  • Kim, N.S.;Ju, J.C.;Song, M.K.;Chung, C.S.;Choi, Y.I.;Park, C.J.
    • Journal of Animal Science and Technology
    • /
    • v.44 no.5
    • /
    • pp.519-522
    • /
    • 2002
  • Body weight-age data from 60 bulls and 60 steer of Hanwoo in the Korean Native Cattle Improvement Center was used to determine the growth curve parameters with Gompertz equation. Estimated growth curve functions were as follows; Bul l : $W_t$ = 906.1.exp{-3.956.exp(-0.0034t)} Steer : $W_t$ = 823.1.exp{-3.301.exp(-0.0027t} Mature weight estimated with Gompertz equation of bull is higher than earlier studies. And the major factor raising differences from the other is feeding level. Relative body weights of steer to bull were rapidly decreased to 79.2% until 19.5 months of age, and then increased slowly. The ratio was 90.8% at mature state. Body weight was under-estimated for bull at birth, but over-estimated for steer, and the body weight variations of bull were larger than the steer.

Efficient Rate Control by Lagrange Multiplier Using Adaptive Mode Selection in Video Coding (비디오 코팅시 Lagrage 승수를 조정하여 적응 모드 선택에 따른 비트율의 제어)

  • Ryu, Chul;Kim, Seung P.
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.1B
    • /
    • pp.77-88
    • /
    • 2000
  • This paper presents an approach for rate control by adaptively selecting macroblock modes in video coding.The problem of rate control has been investigated by many authors where quantizer level is adjustedbased on the buffer fullness. The proposed approach is different fron the previous ones [4] id that it finds the optimal decision curve rather than finding a set of the modes. Proposed algorithm extends the coding decision options for rate control to motion/no-motion compensation as well as inter/intra decisions. Instead of having a fixed motion/no-notion compensation or inter/intra decision curve, one can utilize an adaptive decision curvebased on the characteristics of input frames so that the PSNR at a given bit rate is maximized. Therefore, the proposed approach provides better rate control than simple quantizer feedback approach interns of visual quality. The curve is obtained by utilizing simulated annealing optimization technique. Thealgorithm is implemented and simulations are compared with other approaches within H.261 video codec.

  • PDF

Triple-Step Period Search for Pulsating Variable Stars

  • Zi, Woong-Bae;Kim, Jin-Ah;Kang, Hyuk-Mo;Chang, Seo-Won;Yi, Hahn;Shin, Min-Su;Byun, Yong-Ik
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.38 no.2
    • /
    • pp.80-80
    • /
    • 2013
  • 대규모 광도곡선 자료에서 다양한 주기변광성들의 정확한 주기를 효율적으로 검출하는 실험을 시도하였다. 실험을 위해 OGLE-III 맥동 변광성(RR Lyrae, Delta Scuti, Cepheid) 목록 중, I 필터로 관측된 총 31,324개의 광도 곡선을 사용하였다. 이 실험에 사용한 주기분석 알고리즘 MS_Period(Multi-Step period searching method)는 주기를 놓치지 않기 위해 두 가지 다른 방법(Multi Polynomial function, Phase Dispersion)으로 후보 주기를 구하고 정밀주기를 도출하기 위해 후보 주기 주변부를 Spline fitting을 통해 재탐색하는 방법이다. 기존의 MS_Period 방식은 주기 탐색 간격(dP/P)이 일정하였으나, 우리는 탐색 주기 구간을 나누고 짧은 주기에서는 작은 간격으로, 긴 주기에서는 보다 넓은 간격으로 주기를 탐색하는 과정을 추가하였다. 그 결과 98% 이상의 별에서 OGLE-III와 거의 일치하는 주기를 얻었으며, 긴 주기에서의 불필요한 정밀 탐색을 회피함으로써 분석시간도 단축되었다. 주기 결정이 어려운 경우들은 주로 1) periodogram에서 실제 주기가 아닌 1일 근처에서 noise보다 큰 peak가 보이는 경우, 2) 하나의 별에 대해 여러 주기가 비슷한 Phase diagram을 보이고, periodogram에서도 비슷한 peak를 갖는 경우, 3) OGLE-III의 주기와 전혀 다른 주기만 찾은 경우, 4) OGLE-III에서 제시하지 않은 혼합된 주기의 존재가 의심되는 경우인 것을 확인하였고, 각 사례들의 특징을 살펴보았다.

  • PDF

Extensional Buckling Analysis of Asymmetric Curved Beams Using DQM (미분구적법(DQM)을 사용한 비대칭 곡선 보의 신장 좌굴해석)

  • Kang, Ki-Jun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.4
    • /
    • pp.594-600
    • /
    • 2021
  • Curved beam structures are generally used as components in structures such as railroad bridges and vehicles. The stability analysis of curved beams has been studied by a large number of researchers. Due to the complexities of structural components, it is difficult to obtain an analytical solution for any boundary conditions. In order to overcome these difficulties, the differential quadrature method (DQM) has been applied for a large number of cases. In this study, DQM was used to solve the complicated partial differential equations for buckling analysis of curved beams. The governing differential equation was deduced and solved for beams subjected to uniformly distributed radial loads. Critical loads were calculated with various opening angles, boundary conditions, and parameters. The results of the DQM were compared with exact solutions for available cases, and the DQM gave outstanding accuracy even when only a small number of grid points was used. Critical loads were also calculated for the in-plane inextensional buckling of the asymmetric curved beams, and two theories were compared. The study of a beam with extensibility of the arch axis shows that the effects on the critical loads are significant.