• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.402-407
• /
• 2013

In this paper, an analysis of sound propagation between two rooms with different mediums is discussed. Statistical energy analysis (SEA) is used to consider energy equilibrium among subsystems associated with the sound pressure levels in two rooms and the vibration level of the wall between rooms. Effect of the sound radiation from the structure-borne noise of the wall on sound pressure level of the receiving room is investigated. For a numerical example, sound propagation between engine room and water tank joined by a steel plate whose size is $8.4{\times}4$ m, is considered. It is found that when the critical frequency of the plate is above the frequency range of interest, the sound pressure level in the water tank is dominated by sound transmission through the plate, while sound radiation from the structure-borne noise of the plate is negligible except low frequency range below 63 Hz.

• Journal of Embryo Transfer
• /
• v.21 no.1
• /
• pp.59-67
• /
• 2006

To evaluate the functional status of ovarian cyst in Korean native cows, progesterone ($P_4$) and estrogen ($E_2$) level of cystic follicular fluid, ultrasonography for measuring the cystic diameter and thickness of cystic wall, and histological findings were investigated in cystic ovaries from slaughtered Korean native cows. Ovarian cysts were classified as single follicular cyst 51 cows (59.3%), multiple follicular cysts 19 cows (22.1%), single luteal cyst 13 cows (15.1%) and multiple luteal cysts 3 cows (3.5 %) by anatomical and ultrasonography. Ovarian cysts were classified as follicular cysts (54 cows), luteal cyst (16 cows) and non-functional ovarian cyst (16 cows) by hormone analysis, anatomical finding and ultasonography The luteal cyst was accurately diagnosed by cystic wall thickness, but follicular cysts was misdiagnosed 16 cows of 70 cystic cows The cystic fluid $P_4$ concentration was 3.3 ng/ml in follicular cysts and 30.1 ng/ml luteal cysts. There was significantly positive correlations between cystic wall thickness and serum $P_4$ concentration in follicular ($r^2=0.59$, p<0.001) and luteal cysts ($r^2=0.65$, p<0.001). These results indicated that ovarian cysts had various stages of degeneration and luteal cyst was accurately diagnosed measurement of cystic wall thickness by ultrasonography, but follicular cysts were not diagnosed only cystic diameter and cystic wall thickness.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.199-206
• /
• 2005

In many other countries framed structures with inadequate lateral strength and stiffness have been strengthened by providing reinforced concrete infilled wall. There is a general agreement among researchers those infilled walls have 3-5times greater lateral strength compared with bare frame. The main objective of this research is to investigate the behavior and strength of reinforced concrete frames infilled with concrete block and cast-in-place reinforced concrete panels used for strengthening the structure against seismic action. For this purpose three 1/3 scale, one-bay, one-story reinforced concrete infilled frames were tested under reversed cyclic loading simulating the seismic effect. The results indicate that infilled walls increase both strength and stiffness significantly under lateral loads. Especially Strength capacity and initial stiffness of CIP infilled wall increased 3.8 times and 6.6 times higher than lightly reinforced concrete frame.

• Journal of Astronomy and Space Sciences
• /
• v.3 no.1
• /
• pp.29-40
• /
• 1986

It is the aims of this study to choose the materials and determine the material thickness of laminated Rocket Nozzle Wall operating at high pressure and high temperature. The heat conduction analysis of each layer was performed by Crank Nicolson method changing the thickness and the materials for the imput data of Tungsten, Graphite, Alumina, Aluminum, Molybdenum, Plastic laminate. The results of the study for pressure of 93.5kg/$cm^2$ and temperature of $3000^{circ}C$ in the nozzle dia of 40cm are as follows.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.430-430
• /
• 2008

열화학기상 증착법으로 2원계 합금인 Invar 36(63wt% Fe, 37wt% Ni)을 이용하여 다중벽 탄소나노튜브를 360도의 저온에서 까지 합성이 가능함을 확인하였다. 촉매와 Si 기판과의 silicide형성을 막기 위한 Ti층의 두께가 증가함에 따라서 탄소나노튜브의 길이가 잘 자라는 것을 확인하였으며, 미량의 물이 첨가 되었을 경우 탄소나노튜브의 길이 성장에 큰 변화가 있음을 확인하였다. 또한 물을 포함하는 실험에서는 촉매인 Invar36의 두께가 0.5 nm 일 때에 비하여 0.25 nm 두께에서 물에 대한 영향이 더 크게 나타남을 SEM 사진을 통해 확인할 수 있었다.

• Journal of Plant Biology
• /
• v.34 no.2
• /
• pp.129-136
• /
• 1991

Two cell types, tip cells and hyphal cells, were found at the front of Cuscuta australis endophyte growing into the stem parenchyma of the host plant, Trifolium repens. Each tip cell developed into an elongate, filamentous hypha. The cells of both types possessed a dense cytoplasm including abundant organelles and enlarged nuclei with the deeply lobed envelope. The unevenly thick walls were observed in certain tip cells. The wall penetrated through the middle lamellae of the host cells and engulfed the debris of broken host cells. Some front cells had the plasmalemma-wall invaginations, which increased the surface area and would facilitate material uptake from the host No plasmodesmata between the host and parasite cells were found; instead, an apoplastic continuity was established by fused cell walls at the interface of the two partners. The apoplast was thought to be the main route for water and nutrients transport.nsport.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.205-208
• /
• 2006

This work is a interactive digital art work which used the multiplex of jitter. It is an work which used a cross concept of two images. This work shows two kinds of images. One is on the wall through the gap of fluorescent lamp screen, and the other is on the fluorescent lamp screen. Two images are intercepted and comes out to the length as the multiplex of the jitter. The appearance of the spectator be recognized on the fluorescent lamp screen or on the wall, by two branch image which comes out intersecting of a length with multiplex function of the jitter. Two branch features of the image which it produces and the spectator which is input at real-time is equally divided, or in impression of juxtaposition goes in the spectator. It expresses the duplicity of the human being, with physical existence space divides the time space which we feel and there is a governing grammar which is different with each other and to express the thing it becomes. It used the image of the screen which it produces with the fluorescent lamp and cross concept.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.341-348
• /
• 2016

The aim of this study is to suggest design requirements on the military barriers which are installed to reduce critical damage on protective facilities against sudden pin-point attacks caused by North Korean artilleries. For this purpose, site investigation and review of design drawings associated with barriers built in the contact areas are conducted. With identified data concerning barriers, the geometric modeling, which is used in the structural analysis, is performed. And then, the possible threat of North Korea is determined based on intelligence preparation of battlefields. Once the structural modeling and threat analysis are completed, structural damage on barriers and protective facilities are assessed in terms of impact, penetration, scabbing, and blast pressure effects. According to the analysis results, the thickness of barriers should be 450mm at least and current established barriers need to be structurally reinforced via sectional enlargement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.77-83
• /
• 1986

In this paper, an accurate model for structural analysis of frames with shear walls is introduced. Static and dynamic analysis of two example structures has been performed using the computer program SWAN which employes the newly developed 12 degrees of freedom plane stress element and the results are compared to those obtained using SAP IV. The 12 degrees of freedom element resulted in improved shear stress distribution in wall elements and bending moment in beam elements.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.180-185
• /
• 1997

This work was carried out to investigate change of polygalacturonase activities and polygalacturonase patterns by gel filtration chromatography during softening of persimmon and jujube fruits. During softening of two kinds of fruit, polygalacturonase activities of water-soluble and salt-soluble proteins were increased, but that of cell wall-bound proteins was decreased. In water-soluble and salt-soluble proteins of persimmon fruits, two peaks of polygalacturonase activity were separated in mature stages, but one peak in soft stages. During softening of those fruits, the peaks of polygalacturonase activity in water-soluble and salt-soluble proteins appeared on the same fraction with the peaks of polygalacturonase activity in cell wall-bound proteins.