• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.87-88
• /
• 2009

증발식 담수화 설비에서 증발기로 유입되는 유동의 속도특성은 플래시현상에 중요한 영향을 미친다. 이 연구에서는 벽면제트류가 유입되는 충돌수분류영역과 배플후류영역의 유동 속도에 배플의 높이가 미치는 효과에 관해 PIV계측을 적용해 실험적으로 고찰하였다.

• 대한기계학회논문집B
• /
• 제23권1호
• /
• pp.69-81
• /
• 1999

In this research computational methods for the droplet atomization and spray wall impingement are studied for the non-evaporating diesel fuel spray. The TAB(Taylor Analogy Breakup) model and Wave model are compared with experiments in order to describe droplet atomization process. The Watkins model and O'Rourke model are compared to simulate the spray wall impingement. As a result, It is found that the application of the Wave model has a good agreement with the experimental data in the case of high pressure injection. With regard to wall Impingement phenomena, it is found that the Watkins model is appropriate to the high temperature cylinder wall condition, while the O'Rourke model is appropriate to cold starting problem.

• 한국자동차공학회논문집
• /
• 제2권4호
• /
• pp.39-49
• /
• 1994

An experimental investigation was undertaken in a diesel spray to evaluate wall impingement behavior and droplet size distribution. Emphasis is placed on the possibility of the application for new combustion type which is based on OSKA-D type. Visualization were employed using optical scheme which was a spark shadowgraphy to observe the behavior of wall impingement caused by diesel spray vertically injected at the center of the combustion chamber. Droplet size measurements using Malvern system were made to quantify the visual observations with surface diameter of impingement. The effects of the surface dia. variation on the droplet size during injection with the wall impingement spray are discussed. It was found that for the wall impingement spray the droplet size becomes greatly small rather than the spray without the wall impingement and the droplet deposition rate of the injection fuel is decreased as the surface area of impingement becomes small.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.86-95
• /
• 2000

A modified spray impingement model has been developed, which is assessed against experiments for the impinging sprays on the small combustion chamber at various gas pressures. To investigate spray behaviors in the diesel combustion chamber, a transparent constant-volume chamber is made which is similar to the combustion chamber of the real diesel engine. The chamber is pressurized by N2 gas from 0 bar to 20 bar to find the effects of ambient pressures. The behaviors of spray injected into this chamber and dispersed after impingement on the cylinder wall is measured two-dimensionally using laser sheet Mie scattering method. The physical submodels have been properly modified to improve the prediction capability of original KIVA code to describe the spray behaviors after impingement on the curved cylinder wall. In terms of spray dynamics and evolution. numerical results give qualitatively good agreements with experimental data.

• 대한기계학회논문집B
• /
• 제23권2호
• /
• pp.175-184
• /
• 1999

A theoretical study on the turbulent round jet diffusion flame impinging on the wall was carried out to predict the characteristics and structure of Impinging jet flame and heat transfer to the wall. Finite chemistry via Arrhenius equation and eddy dissipation model was adopted as a combustion model, and the Favre averaging and $k-{\varepsilon}$ model were Introduced In the theoretical modeling. The SIMPLE algorithm was applied to the calculation. All the transport properties were considered as the variable depending on the temperature and composition. For the parametric study, the distance from nozzle to impinging wall and Reynolds number at nozzle exit were chosen 88 the major parameters. As the results of the present study, the characteristics of flow fields, the distributions of main variables and each chemical species and the flame shapes were obtained. The heat transfer rate from the flame to the wall and the effective heating area were calculated to investigate the Influences of the major parameters on the heat transfer characteristics.

• 대한기계학회논문집B
• /
• 제25권6호
• /
• pp.751-757
• /
• 2001

An experimental study of impinging jet-flow structure has been carried out for a fully developed single circular jet impingement cooling on a flat plate, and the effect of the wall thickness at nozzle exit edge is investigated. Impinging jet flow structures have been measured by Laser-Doppler Velocimeter to interpret the heat transfer results presented previously by Yoon et al.(sup)(10) The peaks of heat transfer rate are observed near the nozzle edge owing to the radial acceleration of jet flow when the nozzle locates close to the impingement plate. The growth of the velocity fluctuations in the wall jet flow is induced by the vortices which originate in the jet shear layer, and consequently the radial distribution of local Nusselt numbers has a secondary peak at the certain radial position. As a wall of circular pipe nozzle becomes thicker for small nozzle-to-target distance, the entrainment can be inhibited, consequently, the acceleration of wall jet flow is reduced and the heat transfer rate decreases.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.426-426
• /
• 2006

선박이 천 흘수 및 수로를 운항하는 경우 바닥과 벽면의 영향으로 인해 선체침하 및 비대칭적인 힘이 선체 주위에 발생하여 바닥이나 다른 선박 혹은 수로의 벽에 충돌하는 현상이 발생한다. 특히, 수로가 많은 유럽이나 북미를 운항하는 해운회사와 항해사들은 선박의 충돌을 방지하기 위해서 중요한 문제로 다루고 있다. 따라서, 본 연구에서는 선박의 안전한 항해를 위해 수치해석을 이용하여 선박과 벽면 사이에 발생하는 유체역학적 힘, 즉 Sway force와 Yaw Moment를 정성적으로 추정하고자 하였다. 천 흘수 유동 해석용 프로그램을 작성하였으며, 검증을 위해서 Wigley 선형에 적용하여 h/T별로 계산을 수행하여 시험결과와 비교하였다. 그리고, 벽면효과를 해석 할 수 있는 프로그램을 작성하여 실적선인 원유운반선 2척에 대하여 3가지 파라메터, 즉 선속, 수심 그리고 선박과 벽면 사이 거리의 변화에 따른 다양한 계산을 수행하였다. 계산된 결과는 시험결과 및 기 발표된 수치해석 결과와 비교하였다. 기 발표된 논문에서는 시험결과와 계산결과가 상이한 결론을 보여 주었는데, 그 이유는 수치해석에 있어서 자유표면 문제를 선형화된 자유표면 조건식을 사용한 부분을 가장 큰 이유로 언급하였다. 하지만, 본 연구의 결과는 Sway force와 Yaw Moment가 기 발표된 논문의 시험결과와 정성적으로 일치함을 보여 주었다. 본 연구를 통해 수치해석 방법으로 선박에 작용하는 비대칭 유동에 대한 유체역학적인 힘을 정성적으로 추정할 수 있었고, 제한된 수로에서 선박의 조종성 예측 및 수로 설계시 유용한 정보를 제공할 수 있을 것이라고 판단되어 진다.

• 한국분무공학회지
• /
• 제9권1호
• /
• pp.37-42
• /
• 2004

In a port fuel injection system of engine, a large part of fuel injected into an intake port adheres on its wall and inlet valve. Consequently, the wall impinging spray interaction might occur the generation of several harmful phenomena. There are uncontrollable mixture formation, an accidental backfire and unburned hydrocarbons. Therefore, it is important to analyze the fuel behavior during the spray-wall interaction. In this study, splash characteristics of impingement and reflecting or scattering behavior of droplets of fuel injected from EFI nozzle were studied experimentally. A test fuel used is LAWS and its physical characteristics are similar to the conventional gasoline except for the ignition point. Since the liquid film formed immediately after impinging on an impingement plate is unstable, it is easy to cause secondary disintegration. In addition, when the intermittently impingement on the impingement plate with LAWS, the splash ratio is around 0.6. If an injection period becomes longer, liquid film will become thick and the splash ratio will fall bout 10 percent. On the other hand, when the injection period of an intermittent spray is long, the same time lapse as a continuous spray is shown.

• 한국분무공학회지
• /
• 제5권4호
• /
• pp.1-11
• /
• 2000

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2001년도 제16회 학술발표회 논문초록집
• /
• pp.8-8
• /
• 2001