• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.80-90
• /
• 1995

The scattering parameters of a microstrip single line, a right-angle bend and a coupled line are calculated using the multiport network model for the frequency range from 1 to 18 GHz. The single line is analyzed using the planar waveguide model. The right-angle bend is broken into two rectangular segments, and each segment is analyzed in a similar fashion as the single line. Impedance matrices corresponding to the two segments are combined by the segmentation method. In the analysis of elec- tromagnetic coupling of the coupled line, a new method is employed resulting in much less computation time than those previous methods involving Green's functions. A good agreement between the numerical results for the three structures and those from SuperCompact reveals the usefulness of the multiport network medel in analyzing complicated mirostrip single and coupled line discontinuities.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.58-68
• /
• 2000

This paper proposes a sinusoidal modeling of polyphonic audio signals. Sinusoidal modeling which has been applied well to speech and monophonic signals cannot be applied directly to polyphonic signals because a window size for sinusoidal analysis cannot be determined over the entire signal. In addition, for high quality synthesized signal transient parts like attacks should be preserved which determines timbre of musical instrument. In this paper, a multiresolution filter bank is designed which splits the input signal into six octave-spaced subbands without aliasing and sinusoidal modeling is applied to each subband signal. To alleviate smearing of transients in sinusoidal modeling a dynamic segmentation method is applied to subbands which determines the analysis-synthesis frame size adaptively to fit time-frequency characteristics of the subband signal. The improved dynamic segmentation is proposed which shows better performance about transients and reduced computation. For various polyphonic audio signals the result of simulation shows the suggested sinusoidal modeling can model polyphonic audio signals without loss of perceptual quality.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.93-96
• /
• 2000

수중 폭발성 음원(SUS)을 이용한 천해 저주파 잔향음 실험을 97년 제주 해역에서 실시하였다 측정된 신호를 고유음선 정보를 이용하여 시간영역에서 잡음, 반사, 산란 영역으로 구분하고 각 영역에 대해서 주파수별 스펙트럼 분석을 실시하였으며 각 영역이 갖는 확률적 특성을 분석하였다. 실험해역은 안정된 해저 형태를 갖는 천해였으므로 산란 신호는 일정한 크기를 갖고 지속적으로 수신되었다. 스펙트럼 분석 결과, 시간에 따른 안정성을 갖는 주파수 대역을 확인할 수 있었으며 구분된 영역별 위상은 반사영역과 산란영역의 위상 특성을 잘 반영하고 있었다. 구분된 각 영역에 대해 1/3 옥타브 벤드로 필터링 하여 확률 특성을 분석한 결과 주파수영역의 실수부와 허수부는 각각 정규 분포를 보였으며 그것의 진폭(envelope)은 레일리 분포를 나타냈다. 또한 산란신호의 위상은 저주파 대역에서 유니폼 분포 특성을 나타내어 잔향음의 기본적인 확률 특성을 잘 반영하고 있었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.85-90
• /
• 2001

Recent general Press brake has many problems in cutting high accurate products in the progress of industry. Previous hand-operated press brake needs many pre-processing works to adjust bending ang1e and marking-off works to calculate bending length. Also, the hand-operating work makes many geometric errors and has difficulty for variety-mass production. To solve these problems, this paper proposes Computer Numerical Control (CNC) general press brake and development of servo-control system based on database for reduction of geometric errors and pre-processing work time and high accuracy bending work.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.410-413
• /
• 1997

Recent general press brake has many problems in cutting high accurate products in the progress of industry. Previous hand-operated press brake needs many pre-processing works to adjust bending angle and marking-off works to calculate bending length. Also, The hand-operating work makes many geometric errors and has difficulty for variety-mass production. To solve these problems, this paper proposes Computer Numerical Control (CNC) general press brake and development of servo-control system based on database for reduction of geometric errors and pre-processing work time.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.31-34
• /
• 2009

본 연구에서는 KOMPSAT-3급 고해상도 위성영상을 이용하여 전처리 후 정밀 농업 주제정보를 추출하는 방법론을 제시하고자 하였다. 분석에 사용한 KOMPSAT-3급 고해상도 위성영상은 IKONOS (2001/5/25, 2001/12/25, 2003/10/23) 3개의 영상, QuickBird (2006/5/1, 2004/11/17) 2개의 영상, KOMPSAT-2 (2007/9/17) 1개의 영상 등 모두 6개의 영상을 확보 및 각각에 대한 현장 GCP자료 및 RPC, RPB 자료를 수집하여 정사보정을 실시하였다. RMSE는 약 $0.12\sim3.18$의 값으로 분포되었다. KOMPSAT근 급 영상자료로 부터 정밀농업물재배지도를 작성하기 위해 각 벤드별 Scatter기법을 이용하여 각 밴드간의 상간관계를 살펴보고, 3개의 최적의 밴드를 선정하였다. 또한 작물별 최적의 밴드 결정을 위해 각 밴드별 픽셀 값을 사용하여 Texture 분석을 실시하였다. 그 결과 논의 경우 모든 밴드에서 분석이 용이 한 것으로 분석되었으며, 4밴드의 경우 3개의 작물(고추, 옥수수, 벼)의 분석시 매우 적합한 밴드인 것으로 분석되었다. 각 영상별 필터링 기법과, ISODATA 방법을 이용한 정밀농업 토지이용도 작성하여 기존 스크린 디지타이징 기법으로 작성한 정밀토지이용도와 비교하였다. 다양한 식생정보를 추출하는 위하여 확보된 영상자료로부터 RVI, NDVI, ARVI, SAVI 식생지수 를 추출하였으며, 그 결과를 현장자료로부터 추출한 식생지수간의 결과 값과 비교분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.515-522
• /
• 1994

The radiation characteristics of the conical corrugated feed horn are analyzed by the Gaussian beam mode theory. the electric field over the aperture can be expanded in terms of a set of Gaussian-Laguerre modes. It is proved that these modes are the solutions of the wave epuations for the paraxial approximation. A method, using the sum of the mode expansion coefficients instead of calculation only the fundamental mode, is presented in order to reduce the radiation pattern error. For illustrative examples, the radiation patterns of the corrugated horn antenna operting over C, Ku, and mm-wave band are calculated. Our results agree well with the results obtained by the vector potential method over each band, and also agree well with the measured value at 6.175GHz.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.203-210
• /
• 2006

Purpose : To estimate the dose to the embryo/fetus of a pregnant patient with brain tumors, and to design an shielding device to keep the embryo/fetus dose under acceptable levels Materials and Methods : A shielding wall with the dimension of 1.55 m height, 0.9 m width, and 30 m thickness is fabricated with 4 trolleys under the wall. It is placed between a Patient and the treatment head of a linear accelerator to attenuate the leakage radiation effectively from the treatment head, and is placed 1 cm below the lower margin of the treatment field in order to minimize the dose to a patient from the treatment head. An anti-patient scattering neck supporters with 2 cm thick Cerrobend metal is designed to minimize the scattered radiation from the treatment fields, and it is divided into 2 section. They are installed around the patient neck by attach from right and left sides. A shielding bridge for anti-room scattered radiation is utilized to place 2 sheets of 3 mm lead plates above the abdomen to setup three detectors under the lead sheets. Humanoid phantom is irradiated with the same treatment parameters, and with and without shielding devices using TLD, and ionization chambers with and without a build-up cap. Results : The dose to the embryo/fetus without shielding was 3.20, 3.21, 1.44, 0.90 cGy at off-field distances of 30, 40, 50, and 60 cm. With shielding, the dose to embryo/fetus was reduced to 0.88, 0.60, 0.35, 0.25 cGy, and the ratio of the shielding effect varied from 70% to 80%. TLD results were 1.8, 1.2, 0.8, 1.2, and 0.8 cGy. The dose measured by the survey meter was 10.9 mR/h at the patient's surface of abdomen. The dose to the embryo/fetus was estimated to be about 1 cGy during the entire treatment. Conclusion : According to the AAPM Report No 50 regarding the dose limit of the embryo/fetus during the pregnancy, the dose to the embryo/fetus with little risk is less than 5 cGy. Our measurements satisfy the recommended values. Our shielding technique was proven to be acceptable.