• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.11-18
• /
• 2013

Eulsukdo located in the Nakdong Estuary plays important role in ecosystem and coastal wetland. There have been various changes in Eulsukdo up to now. Recently, we expect a great change of the western part of shoreline in Eulsukdo due to the floodgate construction but there is few databases. In this study, shorelines were digitized after we had produced the ortho-images by using aerial photos taken for 30 years(8 times). SCE, NSM and EPR were analysed by DSAS 4.2 program using vector data. In addition, the changes of shoreline were analysed in October 2011 from before Eulsukdo water gate construction to now by adding field surveying with VRS. The amount of years shoreline change is -0.34m/yr in 2009(before water gate construction) and -0.50m/yr in 2011(during the water gate construction), and the change trend shows an accumulation aspect.

• Spatial Information Research
• /
• v.13 no.3 s.34
• /
• pp.195-209
• /
• 2005

Forest road has been an essential infrastructure for various forestry practices as well as for recreational use, disaster management, and local economics promotion. Since 1980s, extensive network of forest roads has been constructed as an national project in Korea. However, due to the minimal-budget of the project, accurate maps of forest road are not usually available. Although forest road map is a main thematic layer for the forest Geographic Information System (FGIS), its locational accuracy has not been sufficient for the practical applications and, therefore, the update of digital forest road maps is urgent. The objectives of this study is to compare ae methodology of generating and updating digital forest road maps from the aspects of the map accuracy and the efficiency of methods. Four mapping methods (GPS surveying, satellite imagery, ortho aerial photograph, and digital photogrammetry) were applied to generate the forest road maps over the study area of Mt. Oseo in Chungchungnam-do, which has a 35km forest roads distributed in national, public and private forests. The forest road Imp produced by digital photogrammetric method is the most accurate and comparable to GPS surveying although it required the greatest amount of labor time.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.2
• /
• pp.35-39
• /
• 2021

Photogrammetry using drone can produce high-resolution ortho image and acquire high-accuracy 3D information, which is useful. Therefore, this study attempted to determine the possibility of using drone-photogrammetry in park construction by producing a topographic map using drone-photogrammetry and analyzing the problems and accuracy generated during production. For this purpose, we created ortho image and DSM (digital surface model) using drone images and created topographic status map by vectorizing them. Accuracy was compared based on topographic status map by GPS (global positioning system) and TS (total station). The resulting of analyzing mean of the residuals at check points showed that 0.044 m in plane and 0.066 m in elevation, satisfying the tolerance range of 1/1,000 numerical maps, and result of compared lake size showed a difference of about 4.4%. On the other hand, it was difficult to obtain accurate height values for terrain in which existed vegetation when producing the topographic map, and in the case of underground buried objects, it is not possible to confirm it in the image, so direct spatial information acquisition was necessary. Therefore, it is judged that the topographic status map using drone photogrammetry can be efficiently constructed if direct spatial data acquisition is achieved for some terrain.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.385-389
• /
• 2003

최근 고해상도의 인격탐사 위성영상을 이용한 국토공간정보의 환용은 국토계획, 자원조사, 농림업, 건설계획, 국방분야, 환경감시 및 방재, 관광조사 등 여러 분야에서 다양하게 적용되고 있다. 본 연구에서는 과거에 저해상도의 위성영상을 이용하여 수십년전의 지형공간의 조사와 분석을 위한 서로 다른 촬영 시기와 해상도가 다른 Corona 위성사진과 Landsat 위성영상을 합성하여 새로운 퓨젼영상을 생성하는 방법과 퓨젼영상 위에 DEM을 매칭하여 적용하기 위한 벡터데이터 매칭시에 발생할 수 있는 오차의 정도를 확인하기 위한 실험을 통하여 과거 영상복원에 적절한 중첩과 매치의 기법을 발견하여 좀더 정확한 공간정보의 활용 가능성을 제시하고자 하였다.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.10
• /
• pp.631-642
• /
• 2003

We propose an approach to extract and to classify facial features into some classes from one's photo as prepared classification standards to generate one's avatar. Facial Feature Extraction and Classification was executed at eyes, nose, lips, jaw separately and I presented each facial features and classification standards. Extracted Facial Features are used for calculation to features of professional designer's facial component images. Then, most similar facial component images are mapped onto avatar's vector face.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.179-185
• /
• 2013

In this paper we propose a haptic interaction system that physically represents the underlying geometry of objects displayed in a 2D picture, i.e., a digital image. To obtain the object's geometry displayed in the picture, we estimate the physical transformation between the object plane and the image plane based on homographic information. We then calculate the rotated surface normal vector of the object's face and place it on the corresponding part in the 2D image. The purpose of this setup is to create a force that can be rendered along with the image without distorting the visual information. We evaluated the proposed haptic rendering system using a set of pictures of objects with different orientations. The experimental results show that the participants reliably identified the geometric configuration by touching the object in the picture. We conclude this paper with a set of applications.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.399-404
• /
• 2002

In this study, it was intended to present solution for learners to understand and utilize photogrammetry more easily using economic medium except expensive measuring equipment. For this, 3D point data was analysed by generating event to stereo image on monitor, and input to CAD system automatically. so, real time vector editing and drawing with coordinates measurement were possible. The system was verified, and the monitoring for real construction was performed. so, it is expected to be utilized as a practical use software in related fields.

• Spatial Information Research
• /
• v.3 no.1
• /
• pp.19-27
• /
• 1995

In this paper, a semi-automated mapping system, which can produ¬ce digital maps by using information acquired from pre-processing procedure, was introduced. To get a binary edge image, which is very important in vectori¬zation process, we applied adaptive smoothing and connection preserving thresho¬Iding algorithm. In mapper program, binary images are converted to vectors and for in-core data structure, extended PR quad tree was used. These procedures are dispatched to personal computers and workstations and through network resource sharing, the whole process was unified and simplified.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.296-296
• /
• 2017

본 연구에서는 대규모 유역에서 발생하는 침수 현상을 모의하기 위한 강력하고 정확하며 연산효율이 뛰어난 수치해석 모형을 개발하는 데 있다. 개발된 모형은 확산파 모형을 기본으로 하였고 다수의 코어를 동시적으로 해석하는 병렬연산 기법을 부가하였다. 홍수로 인한 대규모 유역에서의 침수해석은 오랜 시간의 연산 비용을 필요로 한다. 특히 수치화된 지형정보의 이용이나 고정밀 사진 측량 등의 방법을 이용하여 정밀하고 넓은 유역의 디지털 지형자료를 이용한 2 차원 침수해석은 연산 연산의 문제를 더욱 어렵게 할 수 있다. 그러므로 본 연구에서는 제내지나 하류 유역에 발생하는 홍수로 발생된 빠른 침수모의를 위해 병렬화된 침수 해석 모형을 이용하여 병렬 해석 모형의 적용성을 검토하고자 하였다. 연구를 위해 MPI 및 OpenMP 기법을 이용하여 2 차원 침수해석 프로그램의 원시코드를 개선하고 실제 제내지 및 실제 댐 하류유역에 적용하였다. 개발된 모형은 실제 제내지에 적용한 결과를 MPI, OpenMP 병렬해석 기법과 기존의 순차적 모형의 결과를 비교하였다. 모형들의 결과를 제내지의 침수양상, 침수 속도벡터의 방향 및 크기 등의 계산 결과 순차적 모형, MPI 및 OpenMP 모형과의 비교하여 연산 시간은 병렬 해석 모형이 우월함을 보였다.